XPA 2002

Technische Daten

XPA 2002-70V, XPA 2002-100V
Audio
Voltage gain
XPA 2002-70V	57x (35 dB)
XPA 2002-100V	81x (38 dB)
Crosstalk	75 dB (typical) @ 1 kHz
CMRR	75 dB (typical) @ 1 kHz
Audio input
Number/signal type	2 balanced/unbalanced
Connectors	(2) 3.5 mm captive screw connectors, 3 pole
Impedance	>10k ohms unbalanced/balanced, DC coupled
Nominal level	+4 dBu (1.23 Vrms), balanced
Maximum level	+21 dBu (8.69 Vrms), balanced
Input sensitivity	+4 dBu (1.23 Vrms)
Input signal detection threshold	-40 dBu ±3 dB, balanced
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output
Number/signal type
XPA 2002-70V	2 channels 70 V
XPA 2002-100V	2 channels, 100 V
Connectors	(2) 5 mm screw lock captive screw connectors, 2 pole
NOTE     These connectors accept wires of 22 AWG to 12 AWG.
Load impedance
XPA 2002-70V	25 ohms minimum
XPA 2002-100V	50 ohms minimum
Amplifier type	Class D
Output power
XPA 2002-70V	200 watts rms per channel, 70 V, 1 kHz, 0.1% THD
XPA 2002-100V	200 watts rms per channel, 100 V, 1 kHz, 0.1% THD
Frequency response	20 Hz to 20 kHz, ±1 dB
THD + Noise	0.1%, 1 kHz, 3 dB below clipping
S/N	100 dB, 20 Hz - 20 kHz, unweighted
Damping factor
XPA 2002-70V	>100 @ 25 ohms
XPA 2002-100V	>100 @ 50 ohms
High pass filter
XPA 2002-70V	80 Hz, 12 dB per octave rolloff for 70 V line output (switch selectable)
XPA 2002-100V	80 Hz, 12 dB per octave rolloff for 100 V line output (switch selectable)
Control/remote — amplifier
Control port	(1) 3.5 mm captive screw connector, 2 pole
Pin configurations
Standby power control (contact closure)	Pin 1 = Gnd, pin 2 = standby
General
Power	Internal Input: 100-240 VAC, 50-60 Hz
Power consumption and thermal dissipation
XPA 2002-70V   115 VAC, 60Hz 230 VAC, 50Hz AC Line Current AC Power Consumed Thermal Dissipation AC Line Current AC Power Consumed Thermal Dissipation Condition A W W BTU/hr A W W BTU/hr Active (1/8 power), all channels driven 70 V 0.8 84.5 34.5 118 0.4 85.6 35.6 122 Quiescent (idle) 0.2 20.8 20.8 71 0.2 23.1 23.1 79 Standby <0.1 <1 <1 <3 <0.1 <1 <1 <3
XPA 2002-100V   115 VAC, 60Hz 230 VAC, 50Hz AC Line Current AC Power Consumed Thermal Dissipation AC Line Current AC Power Consumed Thermal Dissipation Condition A W W BTU/hr A W W BTU/hr Active (1/8 power), all channels driven 100 V 0.8 89.6 39.6 135 0.4 90.4 40.4 138 Quiescent (idle) 0.2 25.1 25.1 86 0.2 26.2 26.2 89 Standby <0.1 <1 <1 <3 <0.1 <1 <1 <3
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents, with heat sinks on the sides
Protection	Clip limiting, thermal, short circuit, DC output
Indication	Limiter/Protect LED indicates the onset of clip limiting, thermal cycling, or a short circuit
Mounting
Rack mount	Yes, with included mounting brackets
Enclosure type	Metal
Enclosure dimensions	1.7" H x 17.4" W* x 12.0" D (1U high, full rack wide) (4.3 cm H x 44.2 cm W* x 30.5 cm D) *Width excludes rack ears. 19.0" (48.3 cm) W with rack ears.
Product weight	9.2 lbs (4.2 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	BSMI, CCC, CE, c-UL, GS, KC, PSE, S-Mark, UL Meets UL 60065, IEC 60065, and BSEN 60065 for AV equipment.
EMI/EMC	CE, CISPR 22 Class B, CISPR 24, C-tick, EN55103-1, EN55103-2, FCC Class B, ICES, KCC, VCCI Class B
Environmental	Complies with the appropriate requirements of ENERGY STAR® (ENERGY STAR qualified amplifier), EU code of conduct, RoHS, WEEE
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(081717-D17)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-883-02	17,8 cm	44,5 cm	58,4 cm	5,42 kg
60-883-12	17,8 cm	45,7 cm	58,4 cm	5,03 kg