XPA 2003C

€ 1764.00

  • inkl. 20 % USt zzgl. Versandkosten
    zurzeit nicht lagernd:
    Lieferzeit 5-7 Tage*

    *Alle Lieferzeiten sind ungefähre Angaben und können von der tatsächlichen Lieferzeit abweichen!

Hersteller
Extron
Art.Nr.
60-848-01
EAN
60-848-01
Gewicht
6 kg

Produktbeschreibung

Hauptmerkmale

  • 600 W eff. Ausgangsleistung:
    XPA 2003C-70V - 2 x 200 W bei 4 ? oder 2 x 100 W bei 8 ? und 1 x 200 W bei 70 V
    XPA 2003C-100V - 2 x 200 W bei 4 ? oder 2 x 100 W bei 8 ? und 1 x 200 W bei 100 V
  • ENERGY STAR®-konformer Verstärker
  • Professionelles Signal-Rausch-Verhältnis und Klirrfaktor
  • Extrons patentierte CDRS™ (Class D Ripple Suppression)-Technologie
  • Lüfterlose Kühlung
  • Ultra-niedriger Einschaltstrom - Festlegung der Reihenfolge beim Einschalten nicht erforderlich
Modell Beschreibung der Version Teilenummer
XPA 2003C-70V 70 V-Verstärker mit drei Kanälen - 200 W je Kanal 60-848-01
XPA 2003C-100V 100 V-Verstärker mit drei Kanälen - 200 W je Kanal 60-848-11

Technische Daten

Technische Daten

XPA 2003C-70V, XPA 2003C-100V
Audio
    Voltage gain 
       Channels 1 and 2  23x (27 dB)
       Channel 3 
          XPA 2003C-70V  57x (35 dB)
          XPA 2003C-100V  81x (38 dB)
    Crosstalk  75 dB (typical) @ 1 kHz
    CMRR  75 dB (typical) @ 1 kHz
Audio input
    Number/signal type  3 balanced/unbalanced
    Connectors  (3) 3.5 mm captive screw connectors, 3 pole
    Impedance  >10k ohms unbalanced/balanced, DC coupled
    Nominal level  +4 dBu (1.23 Vrms), balanced
    Maximum level  +21 dBu (8.69 Vrms), balanced
    Input sensitivity  +4 dBu (1.23 Vrms)
    Input signal detection threshold  -40 dBu ±3 dB, balanced
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output
    Number/signal type 
       XPA 2003C-70V  2 channels, 4 or 8 ohms
1 channel, 70 V
       XPA 2003C-100V  2 channels, 4 or 8 ohms
1 channel, 100 V
    Connectors  (1) 5 mm screw lock captive screw connector, 4 pole
(1) 5 mm screw lock captive screw connector, 2 pole
    NOTE     These connectors accept wires of 22 AWG to 12 AWG.
    Load impedance 
       Channel 1 or 2  4 ohms minimum
       Channel 3 
          XPA 2003C-70V  25 ohms minimum
          XPA 2003C-100V  50 ohms minimum
    Amplifier type  Class D
    Output power 
       Channel 1 or 2 (8 ohm)  100 watts rms per channel, 1 kHz, 0.1% THD
       Channel 1 or 2 (4 ohm)  200 watts rms per channel, 1 kHz, 0.1% THD
       Channel 3 
          XPA 2003C-70V (70 V output)  200 watts rms per channel, 70 V, 1 kHz, 0.1% THD
          XPA 2003C-100V (100 V output)  200 watts rms per channel, 100 V, 1 kHz, 0.1% THD
    Frequency response  20 Hz to 20 kHz, ±1 dB
    THD + Noise 
       Channel 1 or 2  0.1% @ 20 Hz to 20 kHz, 8 ohms, 3 dB below clipping
       Channel 3  0.1%, 1 kHz, 3 dB below clipping
    S/N  100 dB, 20 Hz - 20 kHz, unweighted
    Damping factor 
       Channel 1 or 2  >100 @ 8 ohms
       Channel 3 
          XPA 2003C-70V  >100 @ 25 ohms
          XPA 2003C-100V  >100 @ 50 ohms
    High pass filter 
       XPA 2003C-70V  80 Hz, 12 dB per octave rolloff for 70 V line output (switch selectable)
       XPA 2003C-100V  80 Hz, 12 dB per octave rolloff for 100 V line output (switch selectable)
Control/remote — amplifier
    Control port  (1) 3.5 mm captive screw connector, 2 pole
    Pin configurations 
       Standby power control (contact closure)  Pin 1 = GND, pin 2 = standby
General
    Power  Internal
Input: 100-240 VAC, 50-60 Hz
   Power consumption and thermal dissipation
      XPA 2003C-70V
  115 VAC, 60Hz 230 VAC, 50Hz
AC Line
Current
AC Power
Consumed
Thermal
Dissipation
AC Line
Current
AC Power
Consumed
Thermal
Dissipation/
Condition A W W BTU/hr A W W BTU/hr
Active (1/8 power), all
channels driven
Ch 1 & 2 (8?) + Ch 3 (70 V) 0.8 92.2 42.2 144 0.5 92.9 42.9 146
Ch 1 & 2 (4?) + Ch 3 (70 V) 1.1 122.4 47.4 162 0.6 122.4 47.4 162
Quiescent (idle) 0.3 28.9 28.9 99 0.2 29.8 29.8 102
Standby <0.1 <1 <1 <3 <0.1 <1 <1 <3

      XPA 2003C-100V
  115 VAC, 60Hz 230 VAC, 50Hz
AC Line
Current
AC Power
Consumed
Thermal
Dissipation
AC Line
Current
AC Power
Consumed
Thermal
Dissipation/
Condition A W W BTU/hr A W W BTU/hr
Active (1/8 power), all
channels driven
Ch 1 & 2 (8?) + Ch 3 (100 V) 0.8 94.4 44.4 152 0.46 95.3 45.3 155
Ch 1 & 2 (4?) + Ch 3 (100 V) 1.1 123.1 48.1 164 0.58 123.3 48.3 165
Quiescent (idle) 0.3 28.1 28.1 96 0.17 28.6 28.6 98
Standby <0.1 <1 <1 <3 <0.1 <1 <1 <3

    Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling  Convection, no vents, with heat sinks on the sides
    Protection  Clip limiting, thermal, short circuit, DC output
    Indication  Limiter/Protect LED indicates the onset of clip limiting, thermal cycling, or a short circuit
    Mounting 
       Rack mount  Yes, with included mounting brackets
    Enclosure type  Metal
    Enclosure dimensions  1.7" H x 17.4" W* x 12.0" D (1U high, full rack wide)
(4.3 cm H x 44.2 cm W* x 30.5 cm D)
*Width excludes rack ears. 19.0" (48.3 cm) W with rack ears.
    Product weight  9.2 lbs (4.2kg)
    Vibration  ISTA 1A in carton (International Safe Transit Association)
    Regulatory compliance 
       Safety  BSMI, CCC, CE, c-UL, GS, KC, PSE, S-Mark, UL
Meets UL 60065, IEC 60065, and BSEN 60065 for AV equipment.
       EMI/EMC  CE, CISPR 22 Class B, CISPR 24, C-tick, EN55103-1, EN55103-2, FCC Class B, ICES, KCC, VCCI Class B
       Environmental  Complies with the appropriate requirements of ENERGY STAR® (ENERGY STAR qualified amplifier), EU code of conduct, RoHS, WEEE
    Product warranty  3 years parts and labor
    Everlast power supply warranty  7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(081717-D17)
Versand-Abmessung und -Gewicht
    Teilenummer Höhe Breite Tiefe Gewicht
    60-848-01 17,8 cm 45,7 cm 58,4 cm 5,72 kg
    60-848-11 17,8 cm 45,7 cm 58,4 cm 5,03 kg