XPA 4002

€ 1332.00

  • inkl. 20 % USt zzgl. Versandkosten
    zurzeit nicht lagernd:
    Lieferzeit 5-7 Tage*

    *Alle Lieferzeiten sind ungefähre Angaben und können von der tatsächlichen Lieferzeit abweichen!

Hersteller
Extron
Art.Nr.
60-1244-01
EAN
60-1244-01
Gewicht
6 kg

Produktbeschreibung

Hauptmerkmale

  • 800 W eff. Ausgangsleistung:
    XPA 4002 - 2 x 400 W bei 4 ?, 2 x 200 W bei 8 ? oder 1 x 800 W bei 8 ? (Brückbetrieb)
    XPA 4002-70V - 2 x 400 W bei 70 V
  • ENERGY STAR®-konformer Verstärker
  • Professionelles Signal-Rausch-Verhältnis und Klirrfaktor
  • Extrons patentierte CDRS™ (Class D Ripple Suppression)-Technologie
  • Lüfterlose Kühlung
  • Ultra-niedriger Einschaltstrom - Festlegung der Reihenfolge beim Einschalten nicht erforderlich
Modell Beschreibung der Version Teilenummer
XPA 4002 Verstärker mit zwei Kanälen - 400 W je Kanal 60-1244-01
XPA 4002-70V 70 V-Verstärker mit zwei Kanälen - 400 W je Kanal 60-1245-01

Technische Daten

Technische Daten

XPA 4002 Series
Audio
    Voltage gain 
       XPA 4002  33x (30 dB)
       XPA 4002-70V  57x (35 dB)
    Crosstalk  75 dB (typical) @ 1 kHz
    CMRR  75 dB (typical) @ 1 kHz
Audio input
    Number/signal type  2 balanced/unbalanced
    Connectors  (2) 3.5 mm captive screw connectors, 3 pole
    Impedance  >10k ohms unbalanced/balanced, DC coupled
    Nominal level  +4 dBu (1.23 Vrms), balanced
    Maximum level  +21 dBu (8.69 Vrms), balanced
    Input sensitivity  +4 dBu (1.23 Vrms)
    Input signal detection threshold  -40 dBu ±3 dB, balanced
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output
    Number/signal type 
       XPA 4002  2 channels, 4 or 8 ohms; or 1 bridged mono, 8 ohms
       XPA 4002-70V  2 channels 70 V
    Connectors 
       XPA 4002  (1) 5 mm screw lock captive screw connector, 4 pole
       XPA 4002-70V  (2) 5 mm screw lock captive screw connectors, 2 pole
    NOTE     These connectors accept wires of 22 AWG to 12 AWG.
    Load impedance 
       XPA 4002  4 ohms (8 ohms if bridged) minimum
       XPA 4002-70V  12.5 ohms minimum
    Amplifier type  Class D
   Output power
       XPA 4002  200 watts rms per channel, 8 ohms, 1 kHz, 0.05% THD
400 watts rms per channel, 4 ohms, 1 kHz, 0.05% THD
800 watts rms (bridged mono), 8 ohms, 1 kHz, 0.05% THD
       XPA 4002-70V  400 watts rms per channel, 70 V, 1 kHz, 0.1% THD
    Frequency response  20 Hz to 20 kHz, ±1 dB
    THD + Noise 
       XPA 4002  0.1%, 20 Hz to 20 kHz, 8 ohms, 3 dB below clipping
       XPA 4002-70V  0.1%, 1 kHz, 3 dB below clipping
    S/N  100 dB, 20 Hz - 20 kHz, unweighted
    Damping factor 
       XPA 4002  >100 @ 8 ohms
       XPA 4002-70V  >100 @ 12.5 ohms
    High pass filter 
       XPA 4002-70V  80 Hz, 12 dB per octave rolloff for 70 V line output (switch selectable)
Control/remote — amplifier
    Control port  (1) 3.5 mm captive screw connector, 2 pole
    Pin configurations 
       Standby power control (contact closure)  Pin 1 = GND, pin 2 = standby
General
    Power  Internal
Input: 100-240 VAC, 50-60 Hz
    Power consumption and thermal dissipation 
      XPA 4002
  115 VAC, 60Hz 230 VAC, 50Hz
AC Line
Current
AC Power
Consumed
Thermal
Dissipation
AC Line
Current
AC Power
Consumed
Thermal
Dissipation/
Condition A W W BTU/hr A W W BTU/hr
Active (1/8 power), all
channels driven
8? 0.8 94.3 44.3 151 0.5 95.3 45.3 155
4? 1.4 153.9 53.9 184 0.7 153.6 53.6 183
Quiescent (idle) 0.3 28.1 28.1 96 0.2 29.6 29.6 101
Standby <0.1 <1 <1 <3 <0.1 <1 <1 <3

 

      XPA 4002-70V
  115 VAC, 60Hz 230 VAC, 50Hz
AC Line
Current
AC Power
Consumed
Thermal
Dissipation
AC Line
Current
AC Power
Consumed
Thermal
Dissipation
Condition A W W BTU/hr A W W BTU/hr
Active (1/8 power), all
channels driven
70 V 1.3 149.7 49.7 170 0.7 149.7 49.7 170
Quiescent (idle) 0.2 22.0 22.0 75 0.2 24.2 24.2 83
Standby <0.1 <1 <1 <3 <0.1 <1 <1 <3

 

    Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling  Convection, no vents, with heat sinks on the sides
    Protection  Clip limiting, thermal, short circuit, DC output
    Indication  Limiter/Protect LED indicates the onset of clip limiting, thermal cycling, or a short circuit
    Mounting 
       Rack mount  Yes, with included mounting brackets
    Enclosure type  Metal
    Enclosure dimensions  1.7" H x 17.4" W* x 12.0" D (1U high, full rack wide)
(4.3 cm H x 44.2 cm W* x 30.5 cm D)
*Width excludes rack ears. 19.0" (48.3 cm) W with rack ears.
    Product weight  9.2 lbs (4.2 kg)
    Regulatory compliance  BSMI, CE, c-UL, CISPR Class B, CISPR, C-tick, FCC Class B, ENERGY STAR® (ENERGY STAR qualified amplifier), EU code of conduct, ICES, KCC, RoHS, UL, VCCI Class B, WEEE
    Warranty  3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(081318-D5)
Versand-Abmessung und -Gewicht
    Teilenummer Höhe Breite Tiefe Gewicht
    60-1244-01 17,8 cm 45,7 cm 58,4 cm 5,28 kg
    60-1245-01 17,8 cm 45,7 cm 58,4 cm 5,65 kg