XPA 4002

Technische Daten

XPA 4002 Series
Audio
Voltage gain
XPA 4002	33x (30 dB)
XPA 4002-70V	57x (35 dB)
Crosstalk	75 dB (typical) @ 1 kHz
CMRR	75 dB (typical) @ 1 kHz
Audio input
Number/signal type	2 balanced/unbalanced
Connectors	(2) 3.5 mm captive screw connectors, 3 pole
Impedance	>10k ohms unbalanced/balanced, DC coupled
Nominal level	+4 dBu (1.23 Vrms), balanced
Maximum level	+21 dBu (8.69 Vrms), balanced
Input sensitivity	+4 dBu (1.23 Vrms)
Input signal detection threshold	-40 dBu ±3 dB, balanced
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output
Number/signal type
XPA 4002	2 channels, 4 or 8 ohms; or 1 bridged mono, 8 ohms
XPA 4002-70V	2 channels 70 V
Connectors
XPA 4002	(1) 5 mm screw lock captive screw connector, 4 pole
XPA 4002-70V	(2) 5 mm screw lock captive screw connectors, 2 pole
NOTE     These connectors accept wires of 22 AWG to 12 AWG.
Load impedance
XPA 4002	4 ohms (8 ohms if bridged) minimum
XPA 4002-70V	12.5 ohms minimum
Amplifier type	Class D
Output power
XPA 4002	200 watts rms per channel, 8 ohms, 1 kHz, 0.05% THD 400 watts rms per channel, 4 ohms, 1 kHz, 0.05% THD 800 watts rms (bridged mono), 8 ohms, 1 kHz, 0.05% THD
XPA 4002-70V	400 watts rms per channel, 70 V, 1 kHz, 0.1% THD
Frequency response	20 Hz to 20 kHz, ±1 dB
THD + Noise
XPA 4002	0.1%, 20 Hz to 20 kHz, 8 ohms, 3 dB below clipping
XPA 4002-70V	0.1%, 1 kHz, 3 dB below clipping
S/N	100 dB, 20 Hz - 20 kHz, unweighted
Damping factor
XPA 4002	>100 @ 8 ohms
XPA 4002-70V	>100 @ 12.5 ohms
High pass filter
XPA 4002-70V	80 Hz, 12 dB per octave rolloff for 70 V line output (switch selectable)
Control/remote — amplifier
Control port	(1) 3.5 mm captive screw connector, 2 pole
Pin configurations
Standby power control (contact closure)	Pin 1 = GND, pin 2 = standby
General
Power	Internal Input: 100-240 VAC, 50-60 Hz
Power consumption and thermal dissipation
XPA 4002   115 VAC, 60Hz 230 VAC, 50Hz AC Line Current AC Power Consumed Thermal Dissipation AC Line Current AC Power Consumed Thermal Dissipation/ Condition A W W BTU/hr A W W BTU/hr Active (1/8 power), all channels driven 8? 0.8 94.3 44.3 151 0.5 95.3 45.3 155 4? 1.4 153.9 53.9 184 0.7 153.6 53.6 183 Quiescent (idle) 0.3 28.1 28.1 96 0.2 29.6 29.6 101 Standby <0.1 <1 <1 <3 <0.1 <1 <1 <3
XPA 4002-70V   115 VAC, 60Hz 230 VAC, 50Hz AC Line Current AC Power Consumed Thermal Dissipation AC Line Current AC Power Consumed Thermal Dissipation Condition A W W BTU/hr A W W BTU/hr Active (1/8 power), all channels driven 70 V 1.3 149.7 49.7 170 0.7 149.7 49.7 170 Quiescent (idle) 0.2 22.0 22.0 75 0.2 24.2 24.2 83 Standby <0.1 <1 <1 <3 <0.1 <1 <1 <3
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents, with heat sinks on the sides
Protection	Clip limiting, thermal, short circuit, DC output
Indication	Limiter/Protect LED indicates the onset of clip limiting, thermal cycling, or a short circuit
Mounting
Rack mount	Yes, with included mounting brackets
Enclosure type	Metal
Enclosure dimensions	1.7" H x 17.4" W* x 12.0" D (1U high, full rack wide) (4.3 cm H x 44.2 cm W* x 30.5 cm D) *Width excludes rack ears. 19.0" (48.3 cm) W with rack ears.
Product weight	9.2 lbs (4.2 kg)
Regulatory compliance	BSMI, CE, c-UL, CISPR Class B, CISPR, C-tick, FCC Class B, ENERGY STAR® (ENERGY STAR qualified amplifier), EU code of conduct, ICES, KCC, RoHS, UL, VCCI Class B, WEEE
Warranty	3 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(081318-D5)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-1244-01	17,8 cm	45,7 cm	58,4 cm	5,28 kg
60-1245-01	17,8 cm	45,7 cm	58,4 cm	5,65 kg