TLP Pro 720C

Technische Daten

TLP Pro 720C
Display
Screen type	Active matrix TFT color display
Size	7" (17.8 cm), measured diagonally
Resolution	800x480
Dot/pixel pitch	134 dpi
Aspect ratio	Widescreen
Color depth	256k colors
Transparency	8 bit alpha channel
Brightness	400 nits (cd/m2)
Contrast	400:1
Backlight	LED
Viewing angle	±70° horizontal, +60°/-70° vertical
Touch screen	Resistive
Memory
SDRAM	512 MB
Flash	512 MB
Communication — Ethernet interface
Ethernet control/communications port	1 female RJ-45 connector
Ethernet data rate	10/100Base-T, half/full duplex with autodetect
Ethernet protocol	DHCP, DNS, HTTP, HTTPS, ICMP, SFTP, SSH, TCP/IP, UDP/IP
Default settings	Link speed and duplex level: autodetected IP address = 192.168.254.251 Subnet mask = 255.255.255.0 Default gateway = 0.0.0.0 DHCP = off DNS = 127.0.0.1
Program control	Extron Global Configurator Plus and Professional Extron GUI Designer
Communication — touchpanel
Lid switch	Open/closed
Light sensor	On/off
Audio output
Speaker output	1 mono, 89 dB SPL, 0.1 watt, 0.1 m, half space
Frequency response	750 Hz to 20 kHz, ±5 dB
Playback format(s)
Container format	WAV (Microsoft RIFF)
Encoding	LPCM (uncompressed)
Bit depth	Unsigned 8-bit Signed 16-bit Signed 24-bit Signed 32-bit
Sampling rate	2 kHz to 192 kHz
Audio channels	mono or stereo
General
Power supply	Not included
Power input requirements	12 VDC or Power over Ethernet (PoE 802.3af, class 3)
Power consumption  — Power injector (XTP PI 100)
Device	6.9 watts
Device and power injector	9.8 watts
Power consumption  — 12 VDC power supply (PS 1210C)
Device	5.0 watts
Device and power supply	7.0 watts
Temperature/humidity	Storage: -4 to +140 °F (-20 to +60 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, vents on top and sides
Thermal dissipation  — Power injector (XTP PI 100)
Device	23.5 BTU/hr
Device and power injector	33.3 BTU/hr
Thermal dissipation  — 12 VDC power supply (PS 1210C)
Device	16.8 BTU/hr
Device and power supply	23.7 BTU/hr
Mounting
Furniture mount	With included hardware
Min./max. table thickness	0.375" to 2.00" (0.95 cm to 5.08 cm)
Enclosure type	Metal
NOTE     Architectural Adapter Plates (AAPs) shown in the diagrams above and in photographs are examples only. AAPs are optional accessories for this product. AAPs and cables must be ordered separately.
Enclosure dimensions
ATTENTION     Use the appropriate metal Extron routing template or refer to the surface cutout dimensions here before cutting a hole in the furniture or other surface. Pay special attention to the direction the unit will face; the unit's connector access side is underlined. Extron is not responsible for miscut mounting holes.
Top plate (outer rim)	9.55" W x 7.75" D  (24.26 cm W x 19.69 cm D)
Surface cutout (inside rim)	8.90 +0.00/-0.02" W x 7.10 +0.00/-0.02" D (22.61 +0.00/-0.05 cm W x 18.03 +0.00/-0.05 cm D)
Box (under surface)	7.40" H x 12.27" W (front/rear of unit) x 6.56" D with clamps (18.79 cm H x 31.15 cm W x 16.66 cm D with clamps
Product weight	5.86 lbs (2.66kg)
Shipping weight
Device	8 lbs (4 kg)
Device and power supply	10 lb (5 kg)
DIM weight (International)	12 lbs (6 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick,FCC Class A, ICES, VCCI
Environmental	Complies with the appropriate requirements of RoHS and WEEE.
Product warranty	3 years parts and labor; touchpanel display and overlay components are covered for 1 year
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(8.1-121914-D5)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-1396-0200	29,2 cm	41,0 cm	30,8 cm	3,54 kg
60-1396-020A	29,2 cm	41,0 cm	30,8 cm	4,39 kg