IPL 250

Technische Daten

IPL 250
Ethernet control interface
Connectors	1 RJ-45 female connector
Data rate	10/100Base-T, half/full duplex with autodetect
Protocols	ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet
Default settings	Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.0.0 Gateway = 0.0.0.0 DHCP = off
Web server	Up to 200 simultaneous sessions 7.25 MB nonvolatile user memory
Program control	Extron Global Configurator 3 for Windows® Extron Simple Instruction Set™ (SIS™) Microsoft® Internet Explorer®, Telnet
Global Viewer requirements	Microsoft® Internet Explorer® ver. 6 or higher
Serial control interface
Quantity/type	3 bidirectional RS-232
Connectors	(1) 3.5 mm captive screw connector, 5 pole (2) 3.5 mm captive screw connectors, 3 pole
Baud rate and protocol	300 to 115200 baud Default settings (adjustable): 9600 baud, 8 data bits, 1 stop bit, no parity
NOTE     The 5-pole port supports both hardware and software flow control. The 3-pole ports support software flow control.
Pin configurations
Serial, 5-pole captive screw	Pin 1 = Tx, 2 = Rx, 3 = GND, 4 = RTS, 5 = CTS
Serial, 3-pole captive screw	Pin 1 = Tx, 2 = Rx, 3 = GND
IR control interface
Quantity/type	4 IR (carrier and non-carrier)
Connectors	(2) 3.5 mm captive screw connectors, 4 pole
IR output carrier frequency	30 kHz to 1 MHz
Pin configurations	Pins 1, 3, 5, 7 = IR signal ports 1, 2, 3, 4 (respectively) Pins 2, 4, 6, 8 = GND
IR learning carrier frequency	30 kHz to 1 MHz
IR learning capture distance	2" (5.1 cm) to 12" (30.5 cm) from the front panel
Relay control interface
Quantity/type	4 normally open relays
Relay control connectors	(2) 3.5 mm captive screw connectors, 4 pole
Relay control contact rating	24 V, 1 A
Contact closure control interface
Quantity/type	4 contact closure inputs
Contact input control connector	(1) 3.5 mm captive screw connector, 5 pole
Contact closure (input only)
Input voltage range	0 to 5 VDC, clamped at +5.1 V
Input impedance	10k ohms
Threshold	1.6 VDC
Pin configuration	Pins 1, 2, 3, 4 = inputs 1, 2, 3, 4; pin 5 = GND
General
Power	Supplied by an included external power supply
External power supply	100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated
Power input requirements	12 VDC, 0.5 A
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Mounting
Rack mount	Yes, with optional 1U rack shelf
Furniture mount	Under-furniture mountable with optional kit
Projector mount	Yes, with optional projector mount kit
Enclosure type	Metal
Enclosure dimensions	1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide) (4.3 cm H x 10.9 cm W x 7.6 cm D) (Depth excludes connectors.)
Product weight	0.7 lbs (0.3 kg)
Shipping weight	2 lbs (1 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply; meets UL 60950 for safety.
EMI/EMC	CE, C-tick, FCC Class A, ICES, KC mark, VCCI
Environmental	Complies with the appropriate requirements of RoHS, WEEE
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(8.0-011513-D5)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-1026-81	7,6 cm	18,4 cm	26,0 cm	0,86 kg