IPL T PC1i
EUR
720.00
€ 720.00
Hersteller
Extron
Art.Nr.
60-544-20
EAN
60-544-20
Gewicht
1 kg
Produktbeschreibung
Hauptmerkmale
- Webbasierte, zeitlich einstellbare Fernsteuerung von Netzspannung und Geräten
- Eine IEC-Steckdose
- Ein bidirektionaler serieller RS-232-Anschluss
- Ein IR-Anschluss
- Ein Schließkontakteingang zur Erkennung eines Schalterzustands
- Integrierter Hochleistungs-Webserver
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
IPL T PC1i | 220 VAC IEC | 60-544-20 |
Technische Daten
Technische Daten
-
IPL T PC1, IPL T PC1i AC control interface Connectors IPL T PC1 1 female USA/Edison power connector IPL T PC1i 1 female IEC power connector Voltage IPL T PC1 120 VAC, 50-60 Hz IPL T PC1i 220 VAC, 50-60 Hz Maximum AC load IPL T PC1 12 A, 1440 watts at 120 VAC IPL T PC1i 10 A, 2200 watts at 220 VAC Serial control interface Serial control port (1) RS-232 only, 3.5 mm captive screw connector, 4 pole Baud rate and protocol 115200 to 300 baud (9600 baud = default) ; 8 (default) or 7 data bits; 1(default) or 2 stop bits; no parity (default), or even or odd parity Serial control pin configuration 1 = Tx, 2 = Rx, 3 = GND, 4 = +5 VDC Ethernet control interface Connector 1 female RJ-45 connector Data rate 10/100Base-T, half/full duplex with autodetect Protocols ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet Default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = offWeb server Up to 200 simultaneous sessions
7.25 MB nonvolatile user memoryProgram control Extron Simple Instruction Set (SIS™) Global Viewer requirements Microsoft® Internet Explorer ver. 6 or higher Contact closure interface — input only Quantity/type 1 contact closure input Contact input control connector (1) 3.5 mm captive screw connector, 4 pole (shared with IR output port) Contact closure (input only) Input voltage range 0 to 5 VDC, clamped at +5.1 V Input impedance 10k ohms Threshold 1.6 VDC Pin configuration 1 = contact input, 2 = GND IR control interface IR control port (1) 3.5 mm captive screw connector, 4 pole (shared with contact closure input port) Pin configuration 3 = S (IR signal output), 4 = GND IR output carrier frequency 30 kHz to 1 MHz General Power input Internal
100-240 VAC, 50-60 Hz
5 wattsIPL T PC1 12 A (max.) IPL T PC1i 10 A (max.) Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Convection, no vents Mounting Rack mount Yes, with optional 1U rack shelf Furniture mount Yes, with optional under desk mounting kit Enclosure type Metal Enclosure dimensions 1.7" H x 4.3" W x 6.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)Product weight 1.0 lbs (0.5 kg) Shipping weight 3 lbs (2 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety IPL T PC1 CE, c-UL, UL IPL T PC1i CE EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI Product warranty 3 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (8.0-081111-D5) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-544-20 10,5 cm 22,2 cm 31,3 cm 0,75 kg