IPL T SFI244

Technische Daten

IPL T SFI244
Ethernet control interface
Connectors	1 female RJ-45 connector
Data rate	10/100Base-T, half/full duplex with autodetect
Protocols	ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet
Default settings	Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.0.0 Gateway = 0.0.0.0 DHCP = off
Web server	Up to 200 simultaneous sessions
IPL T SFI244	7.25 MB nonvolatile user memory
Program control	Extron Simple Instruction Set (SIS™)
Global Viewer requirements	Microsoft® Internet Explorer® ver. 6 or higher
Serial control interface
Quantity/type	2 RS-232 only
Connector	(1) 3.5 mm captive screw connector, 5 pole
Baud rate and protocol	300 to 115200 baud Default settings (adjustable): 9600 baud, 8 data bits, 1 stop bit, no parity
Pin configurations	COM1: pin 1 = TX, 2 = RX, 3 = GND COM2: pin 4 = TX, 5 = RX, 3 = GND
Flex I/O control interface
Quantity/type	4 analog input or digital input/output(configurable)
Connectors	(1) 3.5 mm captive screw connector, 5 pole
Digital inputs
Input voltage range	0 to 24 VDC, clamped at +30 VDC
Input impedance	28k ohms
Programmable pullup	2k ohms to +5 VDC
Threshold low to high	Programmable range: 100 mV to 24 VDC, default = 2 VDC
Threshold high to low	Programmable range: 100 mV to 24 VDC, default = 1 VDC
Digital outputs	250 mA sink from 24 VDC max.
Analog inputs	12 bit A/D, 0 to 24 VDC
Pin configurations	1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = GND
IR control interface
Quantity/type	4 IR
Connectors	(1) 3.5 mm captive screw connector, 8 pole
IR output carrier frequency	30 kHz to 1 MHz
Pin configurations	Pins 1, 3, 5, 7 = S 1, S2, S3, S4 Pins 2, 4, 6, 8 = GND
IR learning carrier frequency	30 kHz to 1 MHz
IR learning capture distance	2" (5.1 cm) to 12" (30.5 cm) from the front panel
General
Power	Supplied by an included external power supply
External power supply	100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated
Power input requirements	12 VDC, 0.5 A
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Mounting
Rack mount	Yes, with optional 1U rack shelf
Furniture mount	Yes, with optional under-desk mounting kit
Pole mount	Yes, with optional mini pole mount kit
Enclosure type	Metal
Enclosure dimensions	1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide) (4.3 cm H x 10.9 cm W x 7.6 cm D) (Depth excludes connectors.)
Product weight	0.7 lbs (0.3 kg)
Shipping weight	2 lbs (1 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply; meets UL 60950 for safety
EMI/EMC	CE, C-tick, FCC Class A, ICES, VCCI
Product warranty	3 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(7.6-100209-D13)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-544-86	6,4 cm	22,2 cm	31,3 cm	0,97 kg