AXI 02 AT
EUR
780.00
€ 780.00
Hersteller
Extron
Art.Nr.
60-1753-01
EAN
60-1753-01
Produktbeschreibung
Hauptmerkmale
- Extrahiert zwei Linepegel-Ausgänge von einem Dante®-Netzwerk
- Parallele analoge Zweikanal- und S/PDIF-Audioausgänge
- 24 Bit Analog zu Digital- und Digital zu Analog-Umwandlung in Studioqualität mit wählbaren Abtastraten von bis zu 96 kHz
- Power over Ethernet
- Über Software anpassbare Ausgangsdämpfung am Analogausgang mit SIS-Befehlen über USB oder DSP Configurator
- 1 HE hohes Metallgehäuse mit 1/8-Rackbreite, inklusive ZipClip 100
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
AXI 02 AT | Dante-Audiointerface mit zwei Ausgängen | 60-1753-01 |
Technische Daten
Technische Daten
-
AXI 02 AT Audio Gain Unbalanced output: -6 dB, balanced output: 0 dB Frequency response 20 Hz to 20 kHz, ±0.3 dB THD + Noise <0.01% @ 1 kHz at maximum level S/N Digital In to Analog Out >115dB, 20 Hz to 20 kHz at maximum output (unweighted) Crosstalk <-90 dB @ 1 kHz, fully loaded Output attenuation -100 dB to 0 dB (in 1 dB steps) Audio output — analog Number/signal type 2 mono (or 1 stereo), balanced/unbalanced Connector (1) 3.5 mm captive screw connector, 6-pole Impedance 50 ohms unbalanced, 100 ohms balanced Nominal level -10 dBV (316 mV) or +4 dBu (1.23 V) Maximum level (Hi-Z) >+21 dBu balanced or >+15 dBu unbalanced Audio output — digital Number/signal type 2 PCM (or 1 stereo) Connector 1 RCA connector Impedance 75 ohms AT ports — audio transport Transmission Dante Connector 1 RJ-45 connector to Dante interface Inputs 2 channels Rx (2 flows, unicast or multicast) Audio format Uncompressed, 24-bit, selectable at 44.1, 48, 88.2, or 96 kHz Latency Deterministic, based on user selection: 1.0 ms (default), 2.0 ms, 5.0 ms General Power input requirements Power over Ethernet (PoE 802.3af) PoE power injector (optional) XTP PI 100 Power consumption Device 3.2 watts Device and power injector 5.4 watts Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Convection, no vents Thermal dissipation PoE power injector (optional) XTP PI 100 Device 10.9 BTU/hr Device and power injector 18.3 BTU/hr Mounting Rack mount Yes, with optional 1U high rack shelf, with included ZipClip™ 100 mounting clip, or by securing to rack rails with tie wraps Furniture mount Yes, with included ZipClip™ 100 mounting clip Enclosure type Plastic Enclosure dimensions 1.62” H x 2.13” W x 4.42” D (1U high, one eighth rack wide)
(42 mm H x 55 mm W x 113 mm D)Product weight 0.25 lbs (0.1 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety CE, c-UL, UL EMI/EMC CE, C-Tick, FCC Class A, ICES, VCCI Class A Environmental Complies with the appropriate requirements of RoHS, WEEE Product warranty 3 years parts and labor NOTE All nominal levels are at ±10% NOTE Specifications are subject to change without notice (4175-D4)