AXI 22 AT

€ 1020.00

  • inkl. 20 % USt zzgl. Versandkosten
    zurzeit nicht lagernd:
    Lieferzeit 5-7 Tage*

    *Alle Lieferzeiten sind ungefähre Angaben und können von der tatsächlichen Lieferzeit abweichen!

Hersteller
Extron
Art.Nr.
60-1627-01
EAN
60-1627-01

Produktbeschreibung

Hauptmerkmale

  • Zwei Mikrofon/Linepegel-Eingänge zur Einspeisung von Audio in Dante®-Netzwerk
  • Zwei Linepegel-Ausgänge extrahieren Audiosignale von einem Dante-Netzwerk
  • Dante-Audionetzwerke bieten zahlreiche Erweiterungsmöglichkeiten
  • 24 Bit Analog zu Digital- und Digital zu Analog-Umwandlung in Studioqualität mit wählbaren Abtastraten von bis zu 96 kHz
  • Die Regler für Eingangsauswahl, Verstärkung und Phantomspeisung befinden sich auf dem Frontbedienfeld und können konfiguriert werden über die DSP Configurator-Software
  • Mit Power over Ethernet (PoE) kann das AXI 22 AT ohne ein lokales Netzteil über ein einziges Ethernet-Kabel mit Strom versorgt werden
Modell Beschreibung der Version Teilenummer
AXI 22 AT Dante-Audiointerface mit 2 Ein- und 2 Ausgängen 60-1627-01

Technische Daten

Technische Daten

AXI 22 AT
Audio
    Gain  Unbalanced output: -6 dB, balanced output: 0 dB
    Frequency response  20 Hz to 20 kHz, ±0.3 dB
    THD + Noise  <0.01% @ 1 kHz at maximum level
    S/N 
       Analog In to Digital Out  100 dB, 20 Hz to 20 kHz, at full-scale output (unweighted)
       Digital In to Analog Out  115 dB, 20 Hz to 20 kHz, at maximum balanced output (unweighted)
    Crosstalk  <-90 dB @ 1 kHz, fully loaded
    Output attenuation  -100 dB to 0 dB (in 1 dB steps)
Audio input
    Number/signal type  2 mono mic/line, balanced/unbalanced
    Connector  (1) 3.5 mm captive screw connector, 6-pole
    Impedance  >10k ohms, balanced/unbalanced
    Nominal level  +4 dBu when level is set to 0 dB gain, adjustable from -60 dBu to +4 dBu
    Maximum level  >+21 dBu (at rated THD + N) when input gain is set to 0 dB
    Equivalent input noise  <-120 dBV (1 µVrms) at 40 dB gain
    Input gain adjustment  0 dB to +42 dB, 3 dB steps, adjustable per input
    CMRR  >65 dB @ 1 kHz
    Mic phantom power  +48 VDC ±10%, can be switched on or off per input
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu; All nominal levels are at ±10%
Audio output
    Number/signal type  2 mono (or 1 stereo), balanced/unbalanced
    Connector  (1) 3.5 mm captive screw connector, 6-pole
    Impedance  50 ohms unbalanced, 100 ohms balanced
    Nominal level  -10 dBV (316 mV) or +4 dBu (1.23 V)
    Maximum level (Hi-Z)  >+21 dBu balanced or >+15 dBu unbalanced
AT ports — audio transport
    Transmission  Dante
    Connector  1 RJ-45 connector to Dante interface
    Inputs  2 channels Rx (2 flows, unicast or multicast)
    Outputs  2 channels Tx (2 flows, unicast or multicast)
    Audio format  Uncompressed, 24-bit, selectable at 44.1, 48, 88.2, or 96 kHz
    Latency  Deterministic, based on user selection: 1.0 ms (default), 2.0 ms, 5.0 ms
General
    Power input requirements  12 VDC or Power over Ethernet (PoE 802.3at)
    Power supply (optional)  External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
    Power consumption 
       Device  4.4 watts
       Device and power supply  6.2 watts
    PoE power injector (optional)  XTP PI 100
       Power consumption 
          Device  5.0 watts
          Device and power injector  8.2 watts
    Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling  Convection, no vents
    Thermal dissipation 
       Power supply (optional) 
          Device  11.6 BTU/hr
          Device and power supply  35.2 BTU/hr
       PoE power injector (optional)  XTP PI 100
          Device  13.8 BTU/hr
          Device and power injector  24.7 BTU/hr
    Mounting 
       Rack mount  Yes, with optional 1U high rack shelf
       Furniture mount  Yes, with optional under-desk mounting kit
    Enclosure type  Metal
    Enclosure dimensions  1.66" H x 4.32" W x 6.00" D (1U high, quarter rack wide)
(43 mm H x 110 mm W x 153 mm D)
    Product weight  0.65 lbs (0.3 kg)
    Vibration  ISTA 1A in carton (International Safe Transit Association)
    Regulatory compliance 
       Safety  CE, c-UL, UL
       EMI/EMC  CE, C-Tick, FCC Class A, ICES, VCCI Class A
       Environmental  Complies with the appropriate requirements of RoHS, WEEE
    Product warranty  3 years parts and labor
    NOTE     All nominal levels are at ±10%
    NOTE     Specifications are subject to change without notice
(4177-D9)
  • Kontakt

    Benötigen Sie technische Unterstützung

    Gerne stehen Ihnen unsere Mitarbeiter auch persönlich zur Verfügung. Rufen Sie uns an oder schreiben Sie uns eine Nachricht

  • Extron ProDSP Specialist

    Extron ProDSP Specialist

    Wir sind von der Firma Extron zertifiziert als Extron ProDSP Specialist.

  • Authorized Programmer

    Extron Authorized Programmer

    Wir sind von der Firma Extron zertifiziert als Authorized Programmer.

  • Extron Control Professional

    Extron Control Professional

    Wir sind von der Firma Extron zertifiziert als Extron Control Professional.