AXI 22 AT D
EUR
876.00
€ 876.00
Hersteller
Extron
Art.Nr.
60-1517-03
EAN
60-1517-03
Produktbeschreibung
Hauptmerkmale
- Zwei Mikrofon/Linepegel-Eingänge an XLR-Anschlüssen zur Einspeisung von Audio in ein Dante®-Netzwerk
- Zwei Line-Ausgänge an Schraubklemmleiste auf der Rückseite extrahieren Audio von einem Dante-Netzwerk
- Dante-Audionetzwerke bieten zahlreiche Erweiterungsmöglichkeiten
- 24 Bit Analog zu Digital- und Digital zu Analog-Umwandlung in Studioqualität mit wählbaren Abtastraten von bis zu 96 kHz
- Regler für die Verstärkung und Phantomspeisung befinden sich hinter der Abdeckung
- XLR-Audioeingang für direkten Mikrofonanschluss
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
AXI 22 AT D | Dante-Audiointerface mit 2 Eingängen und 2 Ausgängen - Decorator, Schwarz | 60-1517-02 | |
AXI 22 AT D | Dante-Audiointerface mit 2 Eingängen und 2 Ausgängen - Decorator, Weiß | 60-1517-03 |
Technische Daten
Technische Daten
-
AXI 22 AT D Audio Gain Unbalanced output: -6 dB, balanced output: 0 dB Frequency response 20 Hz to 20 kHz, ±0.3 dB THD + Noise <0.01% @ 1 kHz at maximum level S/N Analog In to Digital Out >95 dB, 20 Hz to 20 kHz, at full-scale output (unweighted) Digital In to Analog Out >95 dB, 20 Hz to 20 kHz, at maximum balanced output (unweighted) Crosstalk <-90 dB @ 1 kHz, fully loaded Audio input Number/signal type 2 mono mic/line, balanced/unbalanced Connectors 2 female XLR connectors, 3-pin Impedance >10k ohms, balanced/unbalanced Nominal level +4 dBu when level is set to 0 dB gain, adjustable from -60 dBu to +4 dBu Maximum level >+21 dBu (at rated THD + N) when input gain is set to 0 dB Equivalent input noise <-120 dBV (1 µVrms) at 45 dB gain Input gain adjustment 0 dB to +45 dB, 5 dB steps, adjustable per input CMRR >65 dB @ 1 kHz Mic phantom power +48 VDC ±10%, can be switched on or off per input NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu; All nominal levels are at ±10% Audio output Number/signal type 2 mono (or 1 stereo), balanced/unbalanced Connector (1) 3.5 mm captive screw connector, 6-pole Impedance 50 ohms unbalanced, 100 ohms balanced Nominal level -10 dBV (316 mV) or +4 dBu (1.23 V) Maximum level (Hi-Z) >+15 dBu balanced or >+9 dBu unbalanced AT ports — audio transport Transmission Dante Connector 1 RJ-45 connector to Dante interface Inputs 2 channels Rx (2 flows, unicast or multicast) Outputs 2 channels Tx (2 flows, unicast or multicast) Audio format Uncompressed, 24-bit, selectable at 44.1, 48, 88.2, or 96 kHz Latency Deterministic, based on user selection: 1.0 ms (default), 2.0 ms, 5.0 ms General Power input requirements 12 VDC or Power over Ethernet (PoE 802.3at) Power supply (optional) External Input 100-240 VAC, 50-60 Hz Output 12 VDC, 0.5 A, 6 Watts Power consumption Device 4.5 watts Device and power supply 5.9 watts PoE power injector (optional) XTP PI 100 Power consumption Device 5.3 watts Device and power injector 8.3 watts Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensingCooling Convection, no vents Thermal dissipation Power supply (optional) Device 12.0 BTU/hr Device and power supply 16.6 BTU/hr PoE power injector (optional) XTP PI 100 Device 14.6 BTU/hr Device and power injector 25.1 BTU/hr Mounting Furniture or wall mount ?Yes, with 1-gang wall box or mud ring Enclosure type Metal Faceplate dimensions 2.61" H x 1.29" W x 0.28" D
(67 mm H x 33 mm W x 7.1 mm D)
(Depth excludes connectors)Device dimensions 2.72" H x 1.68" W x 2.19" D
(69 mm H x 43 mm W x 56 mm D)
(Depth excludes connectors)Product weight 0.3 lbs (0.1 kg) Regulatory compliance CE, C-Tick, c-UL, FCC Class A, ICES, RoHS, VCCI Class A, WEEE Product warranty 3 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice (4488-D12) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-1517-02 6,0 cm 12,7 cm 15,2 cm 0,29 kg 60-1517-03 6,0 cm 12,7 cm 15,2 cm 0,29 kg