DMP 128
EUR
2628.00
€ 2628.00
Hersteller
Extron
Art.Nr.
60-1211-01
EAN
60-1211-01
Gewicht
3 kg
Produktbeschreibung
Hauptmerkmale
- Sechs Modelle mit 12 Mikrofon/Linepegel-Eingängen und acht Ausgängen
- Modelle mit AEC, Dante® und POTS erhältlich
- Acht Kanäle mit AEC (Acoustic Echo Cancellation)
- Acht Eingänge mit FlexInput-Fähigkeiten zur Auswahl zwischen analogen oder Dante-Eingängen an DMP 128 AT-Modellen
- Dante-Audionetzwerke bieten zahlreiche Erweiterungsmöglichkeiten
- Digitaler Audioanschluss zur Verbindung von zwei DMP 128-Geräten
Modell | Beschreibung der Version | Teilenummer | ||
---|---|---|---|---|
DMP 128 | 12x8 Prozessor mit ProDSP | 60-1211-01 | ||
DMP 128 C P | 12x8 Prozessor mit ProDSP, AEC und POTS | 60-1179-01 | ||
DMP 128 C P AT | 12x8 Prozessor mit ProDSP, AEC, POTS und Dante | 60-1179-10 | ||
DMP 128 C | 12x8 Prozessor mit ProDSP und AEC | 60-1178-01 | AUS DEM PROGRAMM GENOMMEN | |
DMP 128 C AT | 12x8 Prozessor mit ProDSP, AEC und Dante | 60-1178-10 | AUS DEM PROGRAMM GENOMMEN | |
DMP 128 AT | 12x8 Prozessor mit ProDSP und Dante | 60-1211-10 | AUS DEM PROGRAMM GENOMMEN |
Technische Daten
Technische Daten
-
DMP 128 Audio system Gain Unbalanced output: -6 dB; balanced output: 0 dB Frequency response 20 Hz to 20 kHz, ±0.2 dB THD + Noise <0.01%, 20 Hz to 20 kHz, at maximum level S/N >105 dB, 20 Hz to 20 kHz, at maximum balanced output, unweighted Crosstalk <-90 dB @ 20 Hz to 20 kHz, fully loaded Volume control -100 dB to 0 dB (control 0 to 100 in 1 dB steps) Audio input Number/signal type 8 mono, mic/line, balanced/unbalanced (with phantom power) Connector (8) 3.5 mm captive screw connectors, 3 pole Number/signal type 4 mono, mic/line, balanced/unbalanced (without phantom power) Connector (2) 3.5 mm captive screw connectors, 6 pole Impedance >10k ohms unbalanced/balanced Nominal level -60 dBV, +4 dBu, -10 dBV adjustable via input gain Maximum level +21 dBu at rated THD+N when mic gain is set to 0 dB Equivalent input noise <-120 dBV (1 µVrms) at 40 dB input gain CMRR >60 dB typical Input gain adjustment -18 dB to +80 dB in 0.1 dB steps, adjustable per input DC phantom power +48 VDC, +10% (inputs 1-8) can be switched on or off NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu Audio output Number/signal type 8 mono, (or 4 stereo) balanced/unbalanced Connectors (4) 3.5 mm captive screw connectors, 6 pole Impedance 50 ohms unbalanced, 100 ohms balanced Gain error ±0.1 dB channel to channel Maximum level (Hi-Z) >+21 dBu balanced, +15 dBu unbalanced Audio processing A/D, D/A conversion 24 bit, 48 kHz sampling AEC tail length >200 msec AEC convergence up to 60 dB/sec Noise cancellation up to 20dB, software selectable EXP port Transmission type Proprietary Connectors (1) RJ-45 connector Inputs 16 channels Rx Outputs 16 channels Tx Audio format 24 bit, 48 kHz sampling, uncompressed EXP cable Shielded CAT6 up to 10 meters (1 foot cable included) Telephone ports (DMP 128 C P and DMP 128 C P AT only) Frequency response 300 to 3200 Hz Input gain -18 to +20 dB in 0.1 dB steps, software adjustable Off hook loop current 10 mA (minimum) Output gain -100 to 0 dB in 0.1 dB steps, software adjustable Dynamic range >60 dB, "A" weighted Country codes USA, Canada, Europe, Australia, Japan, Singapore, United Arab Emirates AT ports (DMP 128 AT models only) — audio transport Transmission type Dante/AES-67, software selectable Connectors (4) RJ-45 connectors, 4-port 1 Gbps switch to Dante Interface Inputs 56 channels Rx Outputs 24 channels Tx Audio format 24 bit, 48 kHz sampling, uncompressed Latency Deterministic, based on user selections: 0.25 ms, 0.5 ms, 1.0 ms (default), 2.0 ms, 5.0 ms Control/remote Serial host control port 1 bidirectional RS-232, 3.5 mm captive screw connector, 3 pole Baud rate and protocol 38400 baud, 8 data bits, 1 stop bit, no parity Serial control pin configuration 1 = Tx, 2 = Rx, 3 = GND USB control ports 1 front panel female mini USB B USB standards USB 2.0, low speed Digital I/O (4) 3.5 mm captive screw connectors, 6 pole
Each port shares a common ground
Input voltage range = 0V to +12V
Output voltage = 0V (low), 5V (high)
Software programmableEthernet host port 1 RJ-45 female Ethernet data rate 10/100Base-T, half/full duplex with autodetect Ethernet default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = offWeb server Up to 200 simultaneous sessions
6.5 MB nonvolatile user memoryProgram control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer®, TelnetGeneral Power Internal
Input: 100-240 VAC, 50-60 HzPower input requirements 28 watts Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling DMP 128: Convection
All other models: Fan, right to leftMounting Rack mount Yes, with included brackets Furniture mount Yes, with optional under-desk mounting kit Enclosure type Metal Enclosure dimensions 1.7" H x 17.4" W x 9.5" D (1U high, full rack wide)
(4.3 cm H x 44.2 cm W x 24.1 cm D)
(Depth excludes connectors.)Product weight 2.8 lbs (1.3 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety CE, c-UL, UL EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI Environmental Complies with the appropriate requirements of RoHS, WEEE Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (051017_D8) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-1211-01 11,4 cm 54,6 cm 36,2 cm 3,12 kg 60-1179-01 11,4 cm 54,6 cm 40,0 cm 3,35 kg 60-1179-10 11,4 cm 54,6 cm 40,0 cm 3,43 kg