MPA 601
EUR
504.00
€ 504.00
Hersteller
Extron
Art.Nr.
60-1449-01
EAN
60-1449-01
Gewicht
1 kg
Produktbeschreibung
Hauptmerkmale
- 60 W eff. Ausgangsleistung:
MPA 601-70V - 1 x 60 W bei 70 V
MPA 601-100V - 1 x 60 W bei 100 V - Professionelles Signal-Rausch-Verhältnis größer als 90 dB und Klirrfaktor von weniger als 0,1%
- ENERGY STAR®-konformer Verstärker
- Extrons patentierte CDRS™ (Class D Ripple Suppression)-Technologie
- Lüfterlose Kühlung mit UL 2043 Plenum-zertifiziertem Gehäuse
- Symmetrische und unsymmetrische gepufferte Audioeingänge
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
MPA 601-70V | 70 V-Mono-Verstärker - 60 W | 60-1449-01 | |
MPA 601-100V | 100 V-Mono-Verstärker - 60 W | 60-1449-11 |
Technische Daten
Technische Daten
-
MPA 601-70V and 100V Audio Voltage gain MPA 601-70V RCA and TRS inputs 222x (47 dB) Captive screw input 57x (35 dB) MPA 601-100V RCA and TRS inputs 317x (50 dB) Captive screw input 81x (38 dB) CMRR 75 dB (typical) @ 1kHz Bass adjustment ±10 dB @ 100 Hz Treble adjustment ±10 dB @ 10 kHz Audio input Number/signal type 1 stereo/mono, balanced/unbalanced input
2 stereo/mono, unbalanced inputs
(The three inputs are individually buffered and mixed together. Stereo signals are actively summed into a mono signal.)Connectors (1) 3.5 mm captive screw connector, 5 pole (main input)
(1) 3.5 mm mini audio jack (tip, ring, sleeve)
1 pair of RCAImpedance RCA and TRS inputs >10k ohms unbalanced, DC coupled Captive screw input >10k ohms unbalanced, 20k ohms balanced, DC coupled Maximum level RCA and TRS inputs +5 dBV, unbalanced, at 1% THD+N Captive screw input +20 dBu, balanced, at 1% THD+N Input sensitivity RCA and TRS inputs -10 dBV if driven by one input
-16 dBV if both inputs are summedCaptive screw input +4 dBu if driven by one input
-2 dBu if both inputs are summedInput signal detection threshold RCA and TRS inputs -68 dBV ±3 dB, unbalanced if driven by one input
-74 dBV ±3 dB, unbalanced if both inputs are summedCaptive screw input -55 dBu ±3 dB, balanced if driven by one input
-61 dBu ±3 dB, unbalanced if both inputs are summedNOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV = 2 dBu Audio output Number/signal type MPA 601-70V 1 single channel (mono) 70V MPA 601-100V 1 single channel (mono) 100V Connector (1) 5 mm screw lock captive screw connector, 2 pole Load impedance MPA 601-70V 83 ohms minimum MPA 601-100V 166 ohms minimum Frequency response 80 Hz to 20 kHz, +1 dB/-3 dB, 1 watt THD + Noise < 0.1% @ 1 kHz, 3 dB below clipping S/N > 90 dB, 20 Hz to 20 kHz, unweighted Damping factor > 100 High pass filter 80 Hz, 12 dB/octave roll off Amplifier type Class D Output power MPA 601-70V 60 watts (rms), 70V, 1 kHz, < 1% THD MPA 601-100V 60 watts (rms), 100V, 1 kHz, < 1% THD Control/remote — amplifier Control port (2) 3.5 mm captive screw connectors, 3 pole Pin configuration DC volume control (analog) Pin 1 = +10 VDC (50 mA max), pin 2 = volume/mute control (variable voltage), pin 3 = GND Volume control voltage range 0V (mute) to 10V (maximum volume) Standby power control Pin 1 = timer off, pin 2 = standby, pin 3 = GND General Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 3 A, 36 wattsPower consumption and thermal dissipation MPA 601-70V 115 VAC, 60Hz 230 VAC, 50Hz AC Line
CurrentAC Power
ConsumedThermal
DissipationAC Line
CurrentAC Power
ConsumedThermal
DissipationCondition A W W BTU/hr A W W BTU/hr Active (1/8 power), all
channels driven70 V 0.3 14.8 7.3 25 0.3 15.7 8.2 28 Quiescent (idle) 0.2 6.3 6.3 21 0.2 7.1 7.1 24 Standby <0.1 <1 <1 <3 <0.1 <1 <1 <3 NOTE Standby is triggered after 25 minutes (±5 minutes) with no signal MPA 601-100V Untitled Document 115 VAC, 60Hz 230 VAC, 50Hz AC Line
CurrentAC Power
ConsumedThermal
DissipationAC Line
CurrentAC Power
ConsumedThermal
DissipationCondition A W W BTU/hr A W W BTU/hr Active (1/8 power), all
channels driven100 V 0.3 15.6 8.1 28 0.3 16.4 8.9 31 Quiescent (idle) 0.2 6.7 6.7 23 0.2 7.6 7.6 26 Standby <0.1 <1 <1 <3 <0.1 <1 <1 <3 NOTE Standby is triggered after 25 minutes (±5 minutes) with no signal Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Convection, no vents Mounting Rack mount Yes, with optional 1U rack shelf or back of rack mounting kit Furniture mount Yes, with optional under-desk mounting kit Pole mount Yes, with optional pole mounting kit Enclosure type Metal Enclosure dimensions 1.7" H x 4.3" W x 6.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors)Product weight 0.9 lbs (0.4 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply; meets UL 60065 and IEC 60065 for AV equipment safety
CE, c-UL, ULEMI/EMC CE, C-tick, FCC Class B, ICES Class B, VCCI, KC Mark Environmental Complies with the appropriate requirements of CEC, ENERGY STAR® (ENERGY STAR® qualified amplifier), EU code of conduct, RoHS, WEEE Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE All nominal levels are at ±10% NOTE Specifications are subject to change without notice (071117-D4)