NetPA 502 AT

Technische Daten

NetPA Series
Audio
Crosstalk	>75 dB @ 1 kHz
Audio input
Number/signal type
NetPA 502 AT	1 stereo or 2 mono
NetPA 1001-70V AT	1 mono
Connectors	1 RJ-45
Maximum level	0 dBFS (digital)
Audio processing
D/A conversion	24 bit, selectable sampling rate
AT ports — audio transport
Transmission type	Dante
Connectivity	1 RJ-45 connector, 1-port 100 Mbps to Dante interface
Inputs
NetPA 502 AT	2 channels Rx
NetPA 1001-70V AT	1 channel Rx
Audio format	24-bit uncompressed, selectable at 44.1, 48, 88.2, and 96 kHz sampling rate
Latency	Deterministic, based on user selection: 2.0 ms (default), 5.0 ms
Audio line output
Number/signal type
NetPA 502 AT	2 channels, balanced/unbalanced
NetPA 1001-70V AT	1 channel, balanced/unbalanced
Connectors
NetPA 502 AT	(1) 3.5 mm captive screw connector, 6 pole
NetPA 1001-70V AT	(1) 3.5 mm captive screw connector, 3 pole
Impedance	50 ohms unbalanced, 100 ohms balanced
Maximum level (at 0 dBFS digital input)	>+15 dBu balanced; +9 dBu unbalanced
Frequency response	20 Hz to 20 kHz, ±1 dB
THD + Noise	0.03% @ 1 kHz at nominal level, 0.3% @ 20 kHz at nominal level
S/N	>90 dB, at maximum output (unweighted)
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio speaker output
Number/signal type
NetPA 502 AT	2 channels, 4 or 8 ohms
NetPA 1001-70V AT	1 channel, 70 V
Connectors
NetPA 502 AT	(1) 5.08 mm screw lock captive screw connector, 4 pole
NetPA 1001-70V AT	(1) 5.08 mm screw lock captive screw connector, 2 pole
NOTE     These connectors accept wires of 22 AWG to 12 AWG.
Load impedance
NetPA 502 AT	4 ohms minimum
NetPA 1001-70V AT	50 ohms minimum
Amplifier type	Class D
Output power
NetPA 502 AT	50 watts rms per channel, 4 ohms, 1 kHz, 0.1% THD 25 watts rms per channel, 8 ohms, 1 kHz, 0.1% THD
NetPA 1001-70V AT	100 watts rms, 70 V, 1 kHz, 0.1% THD
Frequency response
NetPA 502 AT	20 Hz to 20 kHz, +1/-3 dB @ 1 watt
NetPA 1001-70V AT	20 Hz to 20 kHz, +1/-3 dB @ 1 watt
THD + Noise	<0.1% @ 1 kHz, 3 dB below clipping
S/N	>90 dB, 20 Hz - 20 kHz, unweighted
High pass filter
NetPA 1001-70V AT	80 Hz, 12 dB per octave rolloff for 70 V line output (switch selectable)
Communications — amplifier
Control port	(1) 3.5 mm captive screw connector, 2 pole
Pin configurations
Standby power control (contact closure)	Pin 1 = standby, pin 2 = Gnd
General
Power supply	Internal Input: 100-240 VAC, 50-60 Hz, 0.5 A
Power consumption and thermal dissipation
NetPA 502 AT   115 VAC, 60Hz 230 VAC, 50Hz AC Line Current AC Power Consumed Thermal Dissipation AC Line Current AC Power Consumed Thermal Dissipation/ Condition A W W BTU/hr A W W BTU/hr Active (1/8 power), all channels driven 8? 0.3 14.6 8.3 28 0.2 17 10.7 36 4? 0.4 22.3 9.8 33 0.3 24 11.7 40 Quiescent (idle) 0.1 7.4 7.4 25 0.1 9.9 9.9 34 Standby <0.1 <2 <2 <6 <0.1 <2 <2 <6
NetPA 1001-70V AT   115 VAC, 60Hz 230 VAC, 50Hz AC Line Current AC Power Consumed Thermal Dissipation AC Line Current AC Power Consumed Thermal Dissipation Condition A W W BTU/hr A W W BTU/hr Active (1/8 power), all channels driven 70 V 0.4 22.7 10.2 35 0.3 24.1 11.6 39 Quiescent (idle) 0.1 7.6 7.6 26 0.1 9.2 9.2 31 Standby <0.1 <2 <2 <6 <0.1 <2 <2 <6
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents, with internal heat sink
Protection	Clip limiting, thermal, short circuit, DC output
Indication	Limiter/Protect LED indicates the onset of clip limiting, thermal cycling, or short circuit
Mounting
Rack mount	Yes, with optional 1U rack shelf
Furniture mount	Yes, with optional under-desk mounting kit
Enclosure type	Metal
Enclosure dimensions	1.7" H x 8.7" W x 9.5" D (1U high, half rack wide) (4.3 cm H x 22.1 cm W x 24.1 cm D)
Product weight
NetPA 502 AT	2.6 lbs (1.2 kg)
NetPA 1001-70V AT	2.6 lbs (1.2 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL Meets UL 60065, IEC 60065, and BSEN 60065 for AV equipment.
EMI/EMC	CE, C-tick, EN 55103-1, EN 55103-2, FCC Class B, ICES, VCCI Class B
Environmental	Complies with the appropriate requirements of ENERGY STAR® (ENERGY STAR qualified amplifier), RoHS, WEEE.
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(081717-D7)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-1500-01	12,7 cm	33,7 cm	33,7 cm	1,91 kg