SF 26CT
EUR
480.00
€ 480.00
Hersteller
Extron
Art.Nr.
60-1310-03
EAN
60-1310-03
Gewicht
12 kg
Produktbeschreibung
Hauptmerkmale
- 165 mm-Tieftöner mit großem Hub und optimiertem Bassreflex-Gehäuse
- Ferrofluidgekühlter 19 mm-Kalottenhochtöner
- 203 mm-Gehäuse aus Verbundmaterial für Plenum-Umgebungen
- Frequenzbereich: 65 Hz bis 22 kHz
111° konische Abstrahlung - 65 W rosa Rauschen
130 W Musikleistung - Neu Federbügel für eine Deckenstärke von bis zu 57,1 mm
| Modell | Beschreibung der Version | Teilenummer | |
|---|---|---|---|
| SF 26CT | 165 mm großer Zwei-Wege-Deckenlautsprecher, 70/100 V, Paar | 60-1310-03 |
Technische Daten
Technische Daten
-
SF 26CT Audio/acoustic and electrical Speaker type 2-way ceiling speaker with composite back can Frequency range 65 Hz to 22 kHz, -10 dB, half space (per IEC 60268-5) Frequency response 88 Hz to 22 kHz, +/?3dB, half space Power capacity 65 W (rms) continuous pink noise
130 W (rms) continuous programRated maximum input voltage (MIV) 22.4 V (62.6 W at 8 ohms) (per AES2-2012) Maximum SPL 104 dB, 1 m (based on MIV)
106 dB, 1 m (linear)Nominal sensitivity 88 dB SPL, 1W, 1 m, half space Nominal impedance 8 ohms per speaker Crossover frequency 2.5 kHz Nominal coverage angle 111° conical coverage (1 kHz to 4 kHz) Drivers Woofer (1) 6.5" (165 mm) polypropylene cone with moisture resistant coating Tweeter (1) 0.75" (19.1 mm) PEI dome Rotary switch taps 70 V: 64 W, 32 W, 16 W, 8 W, 8 ohms direct
100 V: null, 64 W, 32 W, 16 W, 8 ohms directOverload protection Full range power limiter with the 8 ohm direct input only, protecting the tweeter, woofer, and crossover Input connector (1) 5 mm captive screw connector, 4 pole for 1 input and 1 loop-through General Package 2 speakers (1 pair) Included accessories Cutout template/paint shield, setup guide, mounting screws, 4 V-rails, 2 C-rings, 2 round grilles, 2 cable clamps, 2 captive screw connectors Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingMounting Ceiling mountable with included hardware Enclosure type Plenum rated, fire-resistant (UL94V-0) composite back can/baffle;
Magnetically attached powder-coated steel grille with plastic bezel.Enclosure outer dimensions 8.34" H x 10.64" diameter
(211.8 mm x 270.3 mm diameter)
8.0" H (203.2 mm H) from front of ceiling tile to back of rear enclosureCutout dimensions 9.3" diameter
(236.2 mm diameter)Product weight 9.4 lbs (4.3 kg) each Regulatory compliance Safety CE, UL 2043, UL1480, NFPA 90A, NFPA 70
UL Listed for use in plenum airspaces:
UL 2043 listed for heat and smoke release,
UL 1480 listed for commercial and professional audio systemsEnvironmental RoHS, WEEE Product warranty 5 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. 

(3836-120816-D1) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-1310-03 35,6 cm 52,1 cm 34,3 cm 12,11 kg