Medientechnik

IPCP Pro 250

€ 2448.00

  • inkl. 20 % USt zzgl. Versandkosten
    zurzeit nicht lagernd:
    Lieferzeit 5-7 Tage*

    *Alle Lieferzeiten sind ungefähre Angaben und können von der tatsächlichen Lieferzeit abweichen!

Hersteller
Extron
Art.Nr.
60-1429-01A
EAN
60-1429-01A

Produktbeschreibung

Hauptmerkmale

  • Unterstützt TouchLink Pro-Touchpanels, eBUS®-Tastenfelder und Netzwerk-Tastenfelder
  • Nutzt sichere, branchenübliche Kommunikationsprotokolle
  • Unterstützt LinkLicense®
  • Ein bidirektionaler serieller RS-232-Anschluss mit Software-Handshake
  • Ein bidirektionaler serieller RS-232/RS-422/RS-485- Anschluss mit Hardware- und Software-Handshake
  • Ein serieller/IR-Anschluss zur unidirektionalen Steuerung externer Geräte
Modell Beschreibung der Version Teilenummer
IPCP Pro 250 IP Link Pro-Steuerungsprozessor 60-1429-01
IPCP Pro 250 IP Link Pro-Steuerungsprozessor, LinkLicense-Upgrade für Benutzeroberflächen 60-1429-01A

Technische Daten

Technische Daten

IPCP Pro 250
Memory
    SDRAM  512 MB
    Flash  4.5 GB
Software and control options
    Software  Extron Global Configurator® Plus and Professional for Windows®, Global Scripter®
    Control options  GlobalViewer®, Extron Control for iPad and Web, TouchLink® Pro touchpanels, or eBUS® button panels
Ethernet control
    Network interface controllers (NICs)  1
    Connector  1 female RJ-45 connector
    Data rate  10/100/1000Base-T, half/full duplex with autodetect
    Protocols  DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
    Default settings  Link speed and duplex level = autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS: 127.0.0.1
Serial control
    Quantity/type  1 bidirectional RS-232, RS-422, RS-485 (port 1)
1 bidirectional RS-232 (port 2)
    Connector  (1) 3.5 mm captive screw connector, 5 pole
(1) 3.5 mm captive screw connectors, 3 pole
    Baud rate and protocol  300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, or odd parity
    NOTE     The 5-pole ports support both hardware and software flow control.
The 3-pole ports support software flow control.
The default for both types of ports is no flow control.
    Pin configurations 
      Serial, 5-pole captive screw
          RS-232 (default)  Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 = CTS
          RS-422  Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 = Tx+, 5 = Rx+
          RS-485  Pins 1 and 2 (tied together) = data-, 3 = Gnd, 4 and 5 (tied together) = data+
       Serial, 3-pole captive screw  Pin 1 = Tx, 2 = Rx, 3 = Gnd
Digital I/O control
    Quantity/type  4 digital input/output (configurable)
    Connectors  (1) 3.5 mm captive screw connector, 5 pole
    Digital inputs 
       Input voltage range  0 to 24 VDC, clamped at +30 VDC
       Input impedance  >10k ohms
       Programmable pullup  1k ohms to +5 VDC
       Threshold low to high  >2.8 VDC
       Threshold high to low  <2.0 VDC
    Digital outputs  250 mA sink from 24 VDC max.
    Pin configurations  1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = Gnd
IR/serial control
    Quantity/type  1 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz
    Connector  (1) 3.5 mm captive screw connector, 2-pole
    Baud rate and protocol (RS-232)  300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, or odd parity
    Pin configurations  For each port, pin 1 = signal, 2 = Gnd
    IR output carrier frequency  30 kHz to 300 kHz
    IR learning carrier frequency  30 kHz to 300 kHz
    IR learning capture distance  2" (5.1 cm) to 12" (30.5 cm) from the front panel
Relay control
    Quantity/type  2 normally open relays
    Connector  (1) 3.5 mm captive screw connector, 3 pole
    Relay control contact rating  24 VDC, 1 A
Volume control
    Quantity/type  1 volume control (compatible with select Extron amplifiers)
    Connectors  (1) 3.5 mm captive screw connector, 5 pole
    Pin configuration  Pin 3 = ?10 VDC reference voltage input, pin 4 = 0 to +10 VDC control voltage output, pin 5 = Gnd
    Control voltage output range  0 to +10 VDC (±0.2 volts), adjustable
eBUS control
    eBUS control ports  (1) 3.5 mm captive screw connector, 5 pole (uses 4 poles)
    eBUS pin configuration  +V = +12 VDC; +S = + signal; -S = - signal; G = ground
    Recommended cable type  Extron STP20-2/1000 or STP20-2P/1000 cable
    Maximum system cable length  1000 feet (305 meters) sum total for the eBUS system, regardless of topology. Power injection may be required depending on system cabling topology and primary power supply wattage. See the eBUS Technology Reference Guide for details.
    eBUS power output  6 watts
General
    Power supply  External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
    Power input requirements  12 VDC, 1 A, 12 watts, max.
    Power consumption 
       Device  8.8 watts, 12 VDC
       Device and power supply  11.0 watts, 100-240 VAC, 50-60 Hz
    Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling  Convection, no vents
    Thermal dissipation 
       Device  9.5 BTU/ hr
       Device and power supply  16.8 BTU/hr
    Mounting 
       Rack mount  Yes, with optional 1U rack shelf
       Furniture mount  Yes, with optional bracket kit
    Enclosure type  Metal
    Enclosure dimensions  1.7" H x 4.3" W x 6.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)
    Product weight  0.7 lbs (0.3 kg)
    Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
       Safety  CE, c-UL, UL
UL Listed for use in plenum air handling spaces
       EMI/EMC  CE, C-Tick, FCC Class A, ICES, VCCI
       Environmental  Complies with the appropriate requirements of RoHS, WEEE
    Product warranty  3 years parts and labor
    Everlast power supply warranty  7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(3917-D13-032817)
Versand-Abmessung und -Gewicht
    Teilenummer Höhe Breite Tiefe Gewicht
    60-1429-01 7,5 cm 26,7 cm 19,1 cm 0,92 kg
    60-1429-01A 7,5 cm 26,7 cm 19,1 cm 0,92 kg