IPCP Pro 550
EUR
5136.00
€ 5136.00
Hersteller
Extron
Art.Nr.
60-1418-01A
EAN
60-1418-01A
Gewicht
2 kg
Produktbeschreibung
Hauptmerkmale
- Unterstützt TouchLink Pro-Touchpanels, eBUS®-Tastenfelder und Netzwerk-Tastenfelder
- Nutzt sichere, branchenübliche Kommunikationsprotokolle
- Unterstützt LinkLicense®
- Sechs bidirektionale serielle RS-232-Anschlüsse mit Software-Handshake
- Zwei bidirektionale serielle RS-232/RS-422/RS-485-Anschlüsse mit Hardware- und Software-Handshake
- Acht serielle/IR-Anschlüsse zur unidirektionalen Steuerung externer Geräte
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
IPCP Pro 550 | IP Link Pro-Steuerungsprozessor | 60-1418-01 | |
IPCP Pro 550 | IP Link Pro-Steuerungsprozessor mit LinkLicense | 60-1418-01A |
Technische Daten
Technische Daten
-
IPCP Pro 550 Memory SDRAM 512 MB Flash 4.5 GB Software and control options Software Extron Global Configurator® Plus and Professional for Windows®, Global Scripter® Control options GlobalViewer®, Extron Control for iPad and Web, TouchLink® Pro touchpanels, or eBUS® button panels Ethernet control Network interface controllers (NICs) 1 Connector 1 female RJ-45 connector Data rate 10/100/1000Base-T, half/full duplex with autodetect Protocols DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP Default settings Link speed and duplex level = autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS: 127.0.0.1Serial control Quantity/type 2 bidirectional RS-232, RS-422, RS-485 (ports 7 and 8)
6 bidirectional RS-232 (ports 1 through 6)Connectors (2) 3.5 mm captive screw connectors, 5 pole
(6) 3.5 mm captive screw connectors, 3 poleBaud rate and protocol 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, or odd parityNOTE The 5-pole ports support both hardware and software flow control.
The 3-pole ports support software flow control.
The default for both types of ports is no flow control.Pin configurations Serial, 5-pole captive screw RS-232 (default) Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 = CTS RS-422 Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 = Tx+, 5 = Rx+ RS-485 Pins 1 and 2 (tied together) = data-, 3 = Gnd, 4 and 5 (tied together) = data+ Serial, 3-pole captive screw Pin 1 = Tx, 2 = Rx, 3 = Gnd Flex I/O control Quantity/type 4 analog input or digital input/output (configurable) Connectors (1) 3.5 mm captive screw connector, 5 pole Digital inputs Input voltage range 0 to 24 VDC, clamped at +30 VDC Input impedance 29k ohms Programmable pullup 1k ohms to +5 VDC Threshold low to high Programmable range: 100 mV to 24 VDC, default = 2.4 VDC Threshold high to low Programmable range: 100 mV to 24 VDC, default = 0.8 VDC Digital outputs 250 mA sink from 24 VDC max. Analog inputs 12 bit A/D, 0 to 24 VDC Pin configurations 1, 2, 3, 4 = flex I/Os 1, 2, 3, 4; 5 = Gnd IR/serial control Quantity/type 8 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz Connectors (4) 3.5 mm captive screw connectors, 4-pole Baud rate and protocol (RS-232) 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, or odd parityPin configurations For each port, pin 1 = signal, 2 = Gnd IR output carrier frequency 30 kHz to 300 kHz IR learning carrier frequency 30 kHz to 300 kHz IR learning capture distance 2" (5.1 cm) to 12" (30.5 cm) from the front panel Relay control Quantity/type 8 normally open relays Relay control connectors (4) 3.5 mm captive screw connectors, 4 pole Relay control contact rating 24 VDC, 1 A eBUS control eBUS control ports (1) 3.5 mm captive screw connector, 5 pole (uses 4 poles) eBUS pin configuration +V = +12 VDC; +S = + signal; -S = - signal; G = ground Recommended cable type Extron STP20-2/1000 or STP20-2P/1000 cable Maximum system cable length 1000 feet (305 meters) sum total for the eBUS system, regardless of topology. Power injection may be required depending on system cabling topology and primary power supply wattage. See the eBUS Technology Reference Guide for details. eBUS power output 12 watts Switched DC power output Quantity/type 4 switched 12 VDC outputs Connectors (4) 3.5 mm captive screw connectors, 2 pole Power Maximum 40 watts total Power sense Range 0.1 watt to 40 watts General Power supply Internal
Input: 100-240 VAC, 50-60 HzPower consumption 61.8 watts Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Convection, no vents Thermal dissipation 33.3 BTU/hr Mounting Rack mount Yes, with optional 1U rack shelf Enclosure type Metal Enclosure dimensions 1.7" H x 8.7" W x 10.5" D (1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 26.7 cm D)
(Depth excludes connectors.)Product weight 2.5 lbs (1.1 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety CE, c-UL, UL
UL Listed for use in plenum air handling spacesEMI/EMC CE, C-Tick, FCC Class A, ICES, VCCI Environmental Complies with the appropriate requirements of RoHS, WEEE Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (3922-D10-032817) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-1418-01 15,6 cm 42,1 cm 30,5 cm 1,81 kg 60-1418-01A 15,6 cm 42,1 cm 30,5 cm 1,81 kg