IPL Pro S1
EUR
708.00
€ 708.00
Hersteller
Extron
Art.Nr.
60-1412-01
EAN
60-1412-01
Produktbeschreibung
Hauptmerkmale
- Unterstützt TouchLink Pro-Touchpanels und Netzwerk-Tastenfelder
- Nutzt sichere, branchenübliche Kommunikationsprotokolle
- Ein bidirektionaler RS-232-Anschluss mit Hardware- und Software-Handshake
- Unterstützt gängige BMS (Building Management System)-Protokolle, wie z. B. BACnet, KNX und DALI
- Verwaltet, überwacht und steuert AV?Geräte über ein standardmäßiges Ethernet-Netzwerk
- Mittels „Power over Ethernet“ (PoE) empfängt der Steuerungsprozessor über ein einziges Ethernet-Kabel Strom und Kommunikationssignale, so dass ein lokales Netzteil nicht mehr erforderlich ist
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
IPL Pro S1 | Ein serieller Anschluss | 60-1412-01 |
Technische Daten
Technische Daten
-
IPL Pro S1 Memory SDRAM 512 MB Flash 512 MB Software Configuration software Global Configurator® Plus and Professional, GUI Designer Programming software Global Scripter® Control apps Extron Control, iGVE Resource management software GlobalViewer® Enterprise Utilities Toolbelt, embedded web page Ethernet Network interface controllers (NICs) 1 Connectors 1 female RJ-45 connector Data rate 10/100/1000Base-T, half/full duplex with autodetect Protocols DHCP, DNS, HTTP, HTTPS, ICMP (ping), NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP Default settings Link speed and duplex level = autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS = 127.0.0.1Serial Quantity/type 1 bidirectional RS-232 Connectors (1) 3.5 mm captive screw connector, 5 pole Baud rate and protocol 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, or odd parityNOTE These ports support both hardware and software flow control. The default is no flow control. Pin configurations Serial, 5-pole captive screw RS-232 Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 = CTS General Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 0.5 A, 6 wattsPower input requirements 12 VDC, 1 A, 12 watts, max.
Or Power over Ethernet (PoE) (complies with PoE 802.3af, class 3)Power consumption Device 1.5 watts, 12 VDC Device and power supply 2.0 watts, 100-240 VAC, 50-60 Hz Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Convection, no vents Thermal dissipation Device 5.2 BTU/hr Device and power supply 6.8 BTU/hr Mounting Rack mount Yes, with optional 1U rack shelf or back of the rack mounting kit Furniture mount Yes, with optional bracket kit Enclosure type Metal Enclosure dimensions 1.0" H x 4.3" W x 6.0" D (1U high, quarter rack wide)
(25 mm H x 109 mm W x 152 mm D)
(Depth excludes connectors.)Product weight 0.6 lbs (0.3 kg) Regulatory compliance CE, C-Tick, c-UL, FCC Class A, ICES, KCC, VCCI
UL Listed for use in plenum air handling spaces: meets UL 2043 for heat and smoke release.
Complies with the appropriate requirements of RoHS, WEEEProduct warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (4425-D7) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-1412-01 7,5 cm 26,7 cm 19,1 cm 0,84 kg