IPL Pro S3

€ 876.00

  • inkl. 20 % USt zzgl. Versandkosten
    zurzeit nicht lagernd:
    Lieferzeit 5-7 Tage*

    *Alle Lieferzeiten sind ungefähre Angaben und können von der tatsächlichen Lieferzeit abweichen!

Hersteller
Extron
Art.Nr.
60-1413-01
EAN
60-1413-01

Produktbeschreibung

Hauptmerkmale

  • Unterstützt TouchLink Pro-Touchpanels und Netzwerk-Tastenfelder
  • Nutzt sichere, branchenübliche Kommunikationsprotokolle
  • Zwei bidirektionale RS-232-Anschlüsse mit Hardware- und Software-Handshake
  • Ein bidirektionaler RS-232/RS-422/RS-485-Anschluss mit Hardware- und Software-Handshake
  • Unterstützt gängige BMS (Building Management System)-Protokolle, wie z. B. BACnet, KNX und DALI
  • Verwaltet, überwacht und steuert AV?Geräte über ein standardmäßiges Ethernet-Netzwerk
Modell Beschreibung der Version Teilenummer
IPL Pro S3 Drei serielle Anschlüsse 60-1413-01

Technische Daten

Technische Daten

IPL Pro S3
Memory
    SDRAM  512 MB
    Flash  512 MB
Software
    Configuration software  Global Configurator® Plus and Professional, GUI Designer
    Programming software  Global Scripter®
    Control apps  Extron Control, iGVE
    Resource management software  GlobalViewer® Enterprise
    Utilities  Toolbelt, embedded web page
Ethernet
    Network interface controllers (NICs)  1
    Connectors  1 female RJ-45 connector
    Data rate  10/100/1000Base-T, half/full duplex with autodetect
    Protocols  DHCP, DNS, ICMP (ping), HTTP, HTTPS, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
    Default settings  Link speed and duplex level = autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS = 127.0.0.1
Serial
    Quantity/type  1 bidirectional RS-232, RS-422, RS-485 (port 1)
2 bidirectional RS-232 (ports 2 and 3)
    Connectors  (3) 3.5 mm captive screw connectors, 5 pole
    Baud rate and protocol  300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, or odd parity
    NOTE     These ports support both hardware and software flow control. The default is no flow control.
    Pin configurations 
      Serial, 5-pole captive screw
          RS-232 (default)  Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 = CTS
          RS-422  Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 = Tx+, 5 = Rx+
          RS-485  Pins 1 and 2 (tied together) = data-, 3 = Gnd, 4 and 5 (tied together) = data+
General
    Power supply  External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 0.5 A, 6 watts
    Power input requirements  12 VDC, 1 A, 12 watts, max.
Or Power over Ethernet (PoE) (complies with PoE 802.3af, class 3)
    Power consumption 
       Device  2.0 watts, 12 VDC
       Device and power supply  2.6 watts, 100-240 VAC, 50-60 Hz
    Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling  Convection, no vents
    Thermal dissipation 
       Device  6.8 BTU/hr
       Device and power supply  8.7 BTU/hr
    Mounting 
       Rack mount  Yes, with optional 1U rack shelf or back of the rack mounting kit
       Furniture mount  Yes, with optional bracket kit
    Enclosure type  Metal
    Enclosure dimensions  1.7" H x 4.3" W x 6.0" D (1U high, quarter rack wide)
(43 mm H x 109 mm W x 152 mm D)
(Depth excludes connectors.)
    Product weight  0.8 lbs (0.4 kg)
    Regulatory compliance  CE, C-Tick, c-UL, FCC Class A, ICES, KCC, VCCI
UL Listed for use in plenum air handling spaces: meets UL 2043 for heat and smoke release.
Complies with the appropriate requirements of RoHS, WEEE
    Product warranty  3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(4426-D7)
Versand-Abmessung und -Gewicht
    Teilenummer Höhe Breite Tiefe Gewicht
    60-1413-01 7,5 cm 26,7 cm 19,1 cm 0,89 kg