TLP Pro 1022M

Technische Daten

TLP Pro 1022M and TLS 1022M
Display
Screen type	TFT Active matrix color LCD display
Size	10.1" (25.7 cm), measured diagonally
Resolution	1024x600, WSVGA
Pixel density	118 PPI
Aspect ratio	17:10
Color depth	18 bit, 262k colors
Transparency	8 bit
Brightness	440 nits (cd/m2)
Contrast	500:1
Backlight	LED
Viewing angle	±70° horizontal, +70°/-50° vertical
Touch screen	Capacitive
Memory
RAM	512 MB
Storage	512 MB
Communication
Ethernet interface
Connector	1 female RJ-45 connector
Data rate	10/100Base-T, half/full duplex with autodetect
Protocols	DHCP, DNS, HTTP, HTTPS, ICMP, SFTP, SSH, TCP/IP, UDP/IP
Default settings	Link speed and duplex level: autodetected IP address = 192.168.254.251 Subnet mask = 255.255.255.0 Default gateway = 0.0.0.0 DHCP = off DNS = 127.0.0.1
Software
TLP Pro 1022M
Configuration software	Global Configurator Plus and Professional, GUI Designer
Programming software	Global Scripter
Control apps	Extron Control, iGVE
Resource management software	GlobalViewer Enterprise
Utilities	Toolbelt, Embedded web page
TLS 1022M
Configuration software	Room Agent
Sensors
Motion sensor	On/off
Light sensor	Auto/manual
Audio output
Speaker output	2 stereo, 92 db max SPL @ 0.3m
Frequency response	750 Hz to 20 kHz, ±5 dB
Playback format(s)
Container format	WAV (Microsoft RIFF)
Encoding	LPCM (uncompressed)
Bit depth	Unsigned 8-bit Signed 16-bit Signed 24-bit Signed 32-bit
Sampling rate	Up to 192 kHz
Audio channels	Mono or stereo
General
Power supply	Not included
Power input requirements	Power over Ethernet (PoE 802.3af, class 3)
Power consumption — Power injector
Device	6.8 watts
Device and power injector	9.7 watts
Temperature/humidity	Storage: -4 to +140 °F (-20 to +60 °C) / 10% to 90%, noncondensing Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing
Cooling	Convection, vents on top, back, and bottom
Thermal dissipation — Power injector
Device	23.0 BTU/hr
Device and power injector	33.0 BTU/hr
Mounting
Rack mount	With optional accessories
Furniture or wall mount	With included hardware
Enclosure type	Plastic
Enclosure dimensions
Faceplate	7.58" H x 10.51" W x 0.80" D (193 mm H x 267 mm W x 20 mm D)
Enclosure	5.11" H x 7.28" W x 0.55" D (13 mm H x 185 mm W x 14 mm D) (Allow at least 2.75" [70 mm] depth in the wall/furniture.)
Product weight	2.48 lbs (1.12 kg)
NOTE     Shipping weights and package dimensions are available at www.extron.com under the specifications tab for the product.
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-Tick,FCC Class A, ICES, KCC, VCCI
Environmental	Complies with the appropriate requirements of RoHS and WEEE.
Product warranty	3 years parts and labor; touchpanel display and overlay components are covered for 1 year
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(4208-D1-013118)