TLP Pro 1025T

Technische Daten

TLP Pro 1025T Series
Display
Screen type	TFT Active matrix Color LCD display
Size	10.1" (25.7 cm), measured diagonally
Resolution	1280x800, WXGA
Dot/pixel pitch	149 PPI
Aspect ratio	16:10
Color depth	24 bit, 16.7 million colors
Transparency	8 bit
Brightness	420 nits (cd/m2)
Contrast	800:1
Backlight	LED
Viewing angle	±85° horizontal, ±85° vertical
Touch screen	Capacitive
Memory
RAM	2 GB
Storage	4 GB
Communication — Ethernet interface
Ethernet interface
Control/communications port	1 female RJ-45 connector
Data rate	10/100/1000Base-T, half/full duplex with autodetect
Protocol	DHCP, DNS, HTTP, HTTPS, ICMP, SFTP, SSH, TCP/IP, UDP/IP
Default settings	Link speed and duplex level: autodetected IP address = 192.168.254.251 Subnet mask = 255.255.255.0 Default gateway = 0.0.0.0 DHCP = off DNS = 127.0.0.1
Software
Configuration software	Global Configurator Plus and Professional, GUI Designer
Programming software	Global Scripter
Control apps	Extron Control, iGVE
Resource management software	GlobalViewer Enterprise
Utilities	Toolbelt, Embedded web page
Sensors
Motion sensor	On/off
Light sensor	Auto/manual
USB
Number/signal type	1 high-speed USB 2.0 device
Connectors	1 USB type A receptacle
Standards	USB 2.0, USB 1.1, USB 1.0 compatible
Max. data rates	Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps)
Audio output
Speaker output	1 mono, 89 dB Max. SPL @ 0.1 m
Frequency response	750 Hz to 20 kHz, ±5 dB
Playback format(s)
Container format	WAV (Microsoft RIFF)
Encoding	LPCM (uncompressed)
Bit depth	Unsigned 8-bit Signed 16-bit Signed 24-bit Signed 32-bit
Sampling rate	Up to 192 kHz
Audio channels	Mono or stereo
General
Power supply	Not included
Power input requirements	Power over Ethernet (PoE 802.3af, class 3)
Power consumption — Power injector (XTP PI 100)
Device	11.5 watts
Device and power injector	13.6 watts
Auxiliary power output
USB	5 VDC, 275 mA
Temperature/humidity	Storage: -4 to +140 °F (-20 to +60 °C) / 10% to 90%, noncondensing Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing
Cooling	Convection, vents on back
Thermal dissipation — Power injector (XTP PI 100)
Device	34.5 BTU/hr
Device and power injector	41.6 BTU/hr
Mounting	Set on a tabletop
Enclosure type	Plastic
Enclosure dimensions	6.40" H x 10.10" W x 4.15" D (163 mm H x 257 mm W x 105 mm D)
Product weight	3.00 lbs (1.36 kg)
NOTE     Shipping weights and package dimensions are available at www.extron.com under the specifications tab for the product.
Regulatory compliance	CE, c-UL, UL, C-Tick, FCC Class A, ICES, KCC, VCCI, RoHS, and WEEE.
Product warranty	3 years parts and labor; touchpanel display and overlay components are covered for 1 year
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(4401-D2)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-1565-02	17,8 cm	33,8 cm	23,2 cm	1,84 kg
60-1565-03	17,8 cm	33,8 cm	23,2 cm	1,84 kg
60-1565-12	17,8 cm	33,8 cm	23,2 cm	1,84 kg
60-1565-13	17,8 cm	33,8 cm	23,2 cm	1,84 kg