TLP Pro 725T

Technische Daten

TLP Pro 725T Series
Display
Screen type	TFT Active matrix color LCD display
Size	7" (17.8 cm), measured diagonally
Resolution	1024x600
Pixel/pixel pitch	170
Aspect ratio	Widescreen
Color depth	24 bit, 16.7 million colors
Transparency	8 bit
Brightness	420 nits (cd/m2)
Contrast	700:1
Backlight	LED
Viewing angle	±75° horizontal, +70°/-75° vertical
Touch screen	Capacitive
Memory
SDRAM	2 GB
Flash	4 GB
Communication — Ethernet interface
Ethernet control/communications port	1 female RJ-45 connector
Ethernet data rate	10/100/1000Base-T, half/full duplex with autodetect
Ethernet protocol	DHCP, DNS, HTTP, HTTPS, ICMP, SFTP, SSH, TCP/IP, UDP/IP
Default settings	Link speed and duplex level: autodetected IP address = 192.168.254.251 Subnet mask = 255.255.255.0 Default gateway = 0.0.0.0 DHCP = off DNS = 127.0.0.1
Software
Configuration software	Global Configurator Plus and Professional, GUI Designer
Programming software	Global Scripter
Control apps	Extron Control, iGVE
Resource management software	GlobalViewer Enterprise, iGVE
Utilities	Toolbelt, Embedded web page
Communication — touchpanel
Motion sensor	On/off
Light sensor	On/off
Control — USB
Number/signal type	1 high-speed USB 2.0 device
Connectors	1 USB type A connector
USB standards	USB 2.0, USB 1.1, USB 1.0 compatible
USB data rates	Low speed (1.5 Mbps), full speed (12 Mbps)
Audio output
Speaker output	1 mono, 86 dB SPL, 0.1 watt, 0.1 m, half space
Frequency response	750 Hz to 20 kHz, ±5 dB
Playback format(s)
Container format	WAV (Microsoft RIFF)
Encoding	LPCM (uncompressed)
Bit depth	Unsigned 8-bit Signed 16-bit Signed 24-bit Signed 32-bit
Sampling rate	up to 192 kHz
Audio channels	mono or stereo
General
Power supply	Not included
Power input requirements	Power over Ethernet (PoE 802.3af, class 3)
Power consumption — Power injector (XTP PI 100)
Device	8.2 watts
Device and power injector	10.6 watts
Temperature/humidity	Storage: -4 to +158 °F (-20 to +70 °C) / 5% to 90%, noncondensing Operating: -4 to +158 °F (-20 to +70 °C) / 20% to 90%, noncondensing
Cooling	Convection, vents on back
Thermal dissipation — Power injector (XTP PI 100)
Device	23.1 BTU/hr
Device and power injector	31.3 BTU/hr
Mounting	Set on tabletop
Enclosure type	Plastic
Enclosure dimensions	4.78" H* x 7.12" W x 3.53" D (12.15 cm H* x 18.09 cm W x 8.98 cm D)
Product weight	1.75 lbs (0.79 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick,FCC Class B, ICES, VCCI
Environmental	Complies with the appropriate requirements of RoHS and WEEE.
Product warranty	3 years parts and labor; touchpanel display and overlay components are covered for 1 year
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
NOTE     Shipping dimensions and weights are available at www.extron.com.
(4199-D1-011918)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-1562-12	22,9 cm	21,7 cm	24,8 cm	1,07 kg
60-1562-13	22,9 cm	21,7 cm	24,8 cm	1,07 kg