DTP HD DA 4K 330
EUR
4116.00
€ 4116.00
Hersteller
Extron
Art.Nr.
60-1438-51
EAN
60-1438-51
Gewicht
3 kg
Produktbeschreibung
Hauptmerkmale
- Verteilt HDMI-, Steuerungs- und analoge Audiosignale bis zu 100 m über geschirmtes CATx-Kabel
- Gepufferter HDMI-Durchschleifeingang
- Unterstützt Computer- und Videoauflösungen bis zu 4K
- Es wird nachdrücklich geschirmtes XTP DTP 24-Twisted Pair-Kabel von Extron für eine optimale Leistung empfohlen
- Kompatibel mit geschirmtem CATx-Twisted Pair-Kabel
- DTP-Ausgänge sind mit HDBaseT?fähigen Geräten kompatibel
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
DTP HD DA4 4K 330 | HDMI zu DTP DA mit vier Ausgängen - 100 m | 60-1437-51 | |
DTP HD DA8 4K 330 | HDMI zu DTP DA mit acht Ausgängen - 100 m | 60-1438-51 | |
DTP HD DA4 4K 230 | HDMI zu DTP DA mit vier Ausgängen - 70 m | 60-1437-01 | |
DTP HD DA8 4K 230 | HDMI zu DTP DA mit acht Ausgängen - 70 m | 60-1438-01 |
Technische Daten
Technische Daten
-
DTP HD DA 4K 330 Series specification — HDMI cables or DTP 4K/30 fps products without DisplayPort Frame rate 1 24, 25, 30, 50, or 60 fps Chroma sampling 1 4:4:4, 4:2:2, or 4:2:0 Color bit depth 1 8 bits per color Signal type HDMI 1.4, HDCP 1.4 Max. video data rate 10.2 Gbps (3.4 Gbps per color) NOTE 1Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to determine video parameters supported by this data rate. Video Maximum data rate 10.2 Gbps (3.4 Gbps per color) Maximum pixel clock 300 MHz Resolution range Up to 2560x1600* @ 60 Hz or 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz,
4K/UHD @ 60 Hz with 4:2:0 chroma subsampling
(*Reduced blanking)Color bit depth 8, 10, or 12 bits — subject to the maximum data rate limit Formats RGB and YCbCr digital video Standards DVI 1.0, HDMI 1.4, HDCP 1.4, CEA-861E Video input NOTE *Appropriate HDMI to DVI-D cables or adapters are required for HDMI signal input/output. Number/signal type 1 single link HDMI (or DVI-D*) Connectors 1 female HDMI type A Video output Number/signal type 1 single link HDMI (Local Output) DTP HD DA4 4K 330 4 DTP 330 DTP HD DA8 4K 330 8 DTP 330 Interconnection between transmitter and receivers Connectors DTP HD DA4 4K 330 4 female RJ-45 DTP HD DA8 4K 330 8 female RJ-45 Termination standards TIA/EIA T568B Signal transmission distance DTP HD DA4/DA8 4K 330 1080p @ 60 Hz Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 cable 2560x1600 @ 60 Hz Up to 330' (100 m) using STP cable or XTP DTP 24 cable 4K/UHD @ 30 and 60 Hz Up to 330' (100 m) using STP cable or XTP DTP 24 cable Cable requirements Solid conductor, 24 AWG or better Cable recommendations 400 MHz bandwidth STP cable NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance. NOTE Output mode signaling:
DTP: HDMI with embedded audio, analog audio, RS-232 and IR, and remote power
HDBaseT: HDMI with embedded audio plus RS-232 and IRAudio (analog audio) Gain Unbalanced output (from receiver): 0 dB; balanced output (from receiver): +6 dB Frequency response 20 Hz to 20 kHz, ±1 dB THD + Noise 0.03% @ 1 kHz; 0.3% @ 20 kHz at nominal level S/N >90 dB at maximum input (unweighted) Stereo channel separation >80 dB Digital sampling rate 48 kHz Bit depth 16 bit Audio input (analog audio) Number/signal type 1 PC level stereo, unbalanced NOTE Analog audio is not embedded onto the digital video signal. Analog audio and digital embedded audio are transmitted simultaneously and output on the receiver on two different connectors. Connectors (1) 3.5 mm stereo jack, 2 channel; tip (L); ring (R); sleeve (ground) Impedance >10k ohms, DC coupled Nominal level -10 dBV (316 mVrms) Maximum level +7 dBV, unbalanced NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu Audio output Number/signal type Local output 1 PC level stereo, unbalanced DTP output 4 or 8 embedded digital audio on DTP signal Embedded digital audio source formats 2-ch PCM, PCM, Dolby Digital 2/0, Dolby Digital 2/0 Surround, Dolby Digital 5.1,
Dolby Digital EX, DTS Digital Surround 5.1, DTS-ES Matrix 6.1
DTS-ES Discrete 6.1Connectors Local (1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground) DTP 4 or 8 female RJ-45 Impedance >50 ohms, DC coupled Nominal level -10 dBV (316 mVrms) Maximum level +6.5 dBV (unbalanced) Control/remote Serial control port RS-232, 3.5 mm, 3 pole captive screw connector Baud rate and protocol 9600 baud rate, 8 data bits, 1 stop bit, non-parity Serial control pin configurations Captive screw connectors: 1 = Tx, 2 = Rx, 3 = Gnd USB control ports 1 front panel female mini USB B USB standards USB 2.0, low speed Ethernet data rate 10/100Base-T, half/full duplex, with autodetect Ethernet protocol ARP, ICMP (ping), IP, TCP, DHCP, HTTP, Telnet, SMTP Program control Extron's Simple Instruction Set (SIS™), Extron Product Configuration Software (PCS), Microsoft Internet Explorer, Telnet Communications — external device (RS-232/IR over TP) Serial control port RS-232 via (4) or (8) 3.5 mm, 5 pole captive screw connectors
(connectors are shared with IR control ports)Baud rate and protocol 300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity Serial control pin configuration Captive screw connectors: 1 = Tx, 2 = Rx, 3 = Gnd IR pass-through control port (4) or (8) 3.5 mm, 5 pole captive screw connectors (connectors are shared with RS-232 control ports)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHzIR control pin configuration 3 = Gnd, 4 = IR Tx, 5 = IR Rx NOTE Protocol is mirrored between the connected DTP 230 Rx or DTP 330 Rx endpoints and the "Over TP" ports on the DTP HD DA series. Signals from a control device pass into each "Over TP" port, are embedded with the DTP signal, and sent to the individual DTP 230 Rx or DTP 330 Rx endpoints for control of remote sink or source devices. The "Over TP" ports are simply pass-through connections to DTP endpoints. There is no RS-232 or IR insertion from any DA control port to the "Over TP" ports. General Power supply Internal
Input: 100-240 VAC, 50-60 HzPower consumption DTP HD DA4 4K 330 46.3 watts DTP HD DA8 4K 330 80.8 watts Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Convection, with vents Thermal dissipation DTP HD DA4 4K 330 87.8 BTU/hr DTP HD DA8 4K 330 132 BTU/hr Rack mount Yes, with included rack ears Enclosure type Metal Enclosure dimensions DTP HD DA4 4K 330 1.75" H x 17.5" W x 10.6" D (1U high, full rack wide)
(4.4 cm H x 44.4 cm W x 26.8 cm D, depth excludes connectors)DTP HD DA8 4K 330 1.75" H x 17.5" W x 10.6" D (1U high, full rack wide)
(4.4 cm H x 44.4 cm W x 26.8 cm D, depth excludes connectors)Product weight DTP HD DA4 4K 330 4.9 lbs (2.2 kg) DTP HD DA8 4K 330 5.0 lbs (2.3 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety CE, c-UL, UL EMI/EMC CE**, C-tick, FCC Class A**, ICES, VCCI Environmental Complies with the appropriate requirements of RoHS, WEEE NOTE **CE and FCC testing is conducted with STP cable. Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. NOTE Shipping dimensions and weights are available at http://www.extron.com. (4065-080217) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-1437-51 12,1 cm 36,2 cm 55,2 cm 3,36 kg 60-1438-51 12,1 cm 36,2 cm 55,2 cm 3,27 kg