P/2 DA2xi

Technische Daten

P/2 DA2xi, P/2 DA2xi MT
Video
Gain
P/2 DA2xi	Output: 0 dB or 0.4 dB, selectable Local monitor output: unity
P/2 DA2xi MT	Output: 0 dB or 0.6 dB, selectable Local monitor output: unity
Peaking
P/2 DA2xi	Output: selectable, 0.7 dB or 1.4 dB at 100 MHz Local monitor output: fixed
P/2 DA2xi MT	Output: selectable, 0 dB or 0.6 dB at 100 MHz Local monitor output: fixed
Bandwidth	350 MHz (-3 dB)
Video input
Number/signal type	1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (with adapter), S-video, composite video
Connectors	1 female 15-pin HD
Pin connections	ID bits on pins 4, 11, 12, and 15 are passed through to local monitor output (loop-through). Pin 9 is floating.
Nominal level	1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video
Minimum/maximum levels	Analog, 0.3 V to 1.5 Vp-p with no offset at unity gain
Impedance	75 ohms
Horizontal frequency	15 kHz to 135 kHz
Vertical frequency	30 Hz to 170 Hz
Return loss	<-38 dB @ 5 MHz
DC offset (max. allowable)	1.0 V
Input coupling	DC
Video output
Number/signal type	1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (with adapter), S-video, composite video (follows input type) 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs local monitor loop-through (ID bits are passed through.)
Connectors	2 female 15-pin HD
Nominal level	1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video at unity gain
Minimum/maximum levels	Analog, 0.3 V to 1.5 Vp-p (follows input)
Impedance	75 ohms
Return loss	<-40 dB @ 5 MHz
DC offset	±5 mV with input at 0 offset
Sync
Input type	RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync
Output type	RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync
Output type	RGBHV, RGBS, RGsB, RsGsBs
Input level	1.5 V to 5.0 Vp-p
Output level	TTL, 5 Vp-p, unterminated
Input impedance
P/2 DA2xi	<1k ohm (default) or 10k ohms, selectable
P/2 DA2xi MT	510 ohms (fixed)
Output impedance	75 ohms (default) or 50 ohms, selectable
Max. propagation delay	60 ns
Max. rise/fall time	4 ns
Polarity	Positive or negative (follows input)
Audio — P/2 DA2xi MT only
Gain	Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response	20 Hz to 20 kHz, +0.05 dB, -0.1 dB
THD + Noise	0.03% @ 1 kHz at nominal level
S/N	>90 dB (balanced) at maximum output
Crosstalk	<-80 dB @ 1 kHz, fully loaded
Stereo channel separation	>80 dB @ 1 kHz, >60 dB @ 20 kHz
CMRR	>67 dB @ 20 Hz to 20 kHz
Audio input — P/2 DA2xi MT only
Number/signal type	1 stereo, unbalanced
Connector	(1) 3.5 mm stereo jack, female; tip (L), ring (R), sleeve (GND)
Impedance	50 ohms unbalanced, 100 ohms balanced
Gain error	±0.1 dB channel to channel
Nominal level	-2 dBu (632 mV) balanced output -10 dBV (316 mV) unbalanced output
Maximum level	>+10 dBV (3.16 V) (unbalanced) at 1%THD+N
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output — P/2 DA2xi MT only
Number/signal type	1 stereo, balanced/unbalanced
Connectors	(1) 3.5 mm captive screw connector, 5 pole
Impedance	50 ohms unbalanced, 100 ohms balanced
Gain error	±0.1 dB channel to channel
Nominal level	-2 dBu (632 mV) balanced output -10 dBV (316 mV) unbalanced output
Maximum level (Hi-Z)	>+15 dBu (4.36 V), balanced at 1% THD+N, with external power supply
Maximum level (600 ohm)	>+9 dBm (2.18 V), balanced at 1% THD+N, with external power supply
General
External power supply	100 VAC to 240 VAC, 50-60 Hz, 6 watts, external; to 12 VDC, 0.5 A, regulated
Power input requirements	12 VDC, 0.2 A
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Mounting
Rack mount	Yes, with optional 1U rack shelf
Furniture mount
P/2 DA2xi	Yes, with optional under-desk mounting kit
P/2 DA2xi MT	Yes, with included under-desk mount kit or optional through-desk mount kit
Pole mount	Yes, with optional pole mount kit
Enclosure type	Metal
Enclosure dimensions	1.0" H x 4.3" W x 3.0" D (quarter rack wide) (2.5 cm H x 10.9 cm W x 7.6 cm D) (Depth excludes connectors.)
Product weight	0.5 lbs (0.3 kg)
Regulatory compliance	CE, C-tick, c-UL, UL, FCC Class A, ICES, KCC, VCCI
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(4450-D15)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-506-03	6,4 cm	22,2 cm	31,3 cm	1,13 kg