AXP 64 C AT

Technische Daten

AXP 64 C AT
Audio
Gain	-6 dB unbalanced output, 0 dB balanced output
Frequency response	20 Hz to 20 kHz, ±0.2 dB
THD + Noise	<0.01%, 20 Hz to 20 kHz, at maximum level
S/N
Analog to digital	110 dB, 20 Hz to 20 kHz, at full-scale output, unweighted
Digital to analog	110 dB, 20 Hz to 20 kHz, at maximum balanced output, unweighted
Crosstalk	<-90 dB @ 20 Hz to 20 kHz, fully loaded
Volume control	-100 dB to 0 dB in 0.1 dB steps
Audio input
Number/signal type	6 mono, mic/line, balanced/unbalanced
Connectors	(6) 3.5 mm captive screw connectors, 3 pole, mono, balanced/unbalanced, 4 with phantom power
Impedance	>10k ohms balanced/unbalanced
Nominal level	-60 dBV, +4 dBu, -10 dBV, adjustable via input gain
Maximum level	>+21 dBu, at rated THD+N when input gain is set to 0 dB
Equivalent input noise	<-120 dBV (1 µVrms) at 40 dB gain
Input gain adjustment (mic)	-18 dB to +80 dB, in 0.1 dB steps, adjustable per input
CMRR	70 dB typical
DC phantom power	+48 VDC, ±10%, inputs 1-4, can be switched on or off per input
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output
Number/signal type	4 mono (or 2 stereo), balanced/unbalanced
Connectors	(2) 3.5 mm captive screw connectors, 6 pole, balanced/unbalanced
Impedance	50 ohms unbalanced, 100 ohms balanced
Gain error	±0.1 dB channel to channel
Maximum level (Hi-Z)	>+21 dBu balanced, +15 dBu unbalanced
Audio processing
A/D conversion	24 bit, 48 kHz sampling
AEC convergence	Up to 60 dB/sec
AEC tail length	>200 msec
Noise cancellation	Up to 20 dB, software selectable
AT ports — audio transport
Transmission type	Dante
Connectivity	4 RJ-45 connectors, 4-port 1 Gbps switch to Dante interface
Inputs	12 channels Rx (4 FlexInputs, 4 AEC reference, 4 to analog outputs)
Outputs	10 channels Tx (4 pre-processing, 6 post-processing)
Audio format	24 bit, 48 kHz sampling, uncompressed
Latency	Deterministic, based on user selections: 0.25 ms, 1.0 ms (default), 5.0 ms
Communications
Ethernet host port	4 RJ-45 female, 1 can be configured for control only
Ethernet data rate	Gigabit, half/full duplex with autodetect
Ethernet default settings	Link speed and duplex level = autodetected DHCP = on
Program control	Extron DSP Configurator control/configuration program for Windows® Extron Simple Instruction Set (SIS™), Telnet
General
Power input requirements	12 VDC
Power supply	External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 W
Power consumption and thermal dissipation
Device
Power consumption	13.5 W
Thermal dissipation	45.8 BTU/hr
Device and power supply
Power consumption	16.2 W
Thermal dissipation	55.2 BTU/hr
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Mounting
Rack mount	Yes, with optional 1U rack shelf
Furniture mount	Yes, with optional under-desk mounting kit
Enclosure type	Metal
Enclosure dimensions	1.7" H x 8.75" W x 9.5" D (1U high, half rack wide) (4.3 cm H x 22.2 cm W x 24.1 cm D) (Depth excludes connector)
Product weight	1.9 lbs (0.9 kg)
Regulatory compliance	CE, C-tick, c-UL, FCC Class A, ICES, RoHS, UL, VCCI, WEEE
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(4348-D4)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-1499-01	11,4 cm	33,0 cm	35,6 cm	1,79 kg