DTP T UWP 4K 332 D

€ 1224.00

  • inkl. 20 % USt zzgl. Versandkosten
    zurzeit nicht lagernd:
    Lieferzeit 5-7 Tage*

    *Alle Lieferzeiten sind ungefähre Angaben und können von der tatsächlichen Lieferzeit abweichen!

Hersteller
Extron
Art.Nr.
60-1755-52
EAN
60-1755-52

Produktbeschreibung

Hauptmerkmale

  • Überträgt HDMI-, VGA-, Steuerungs- und analoge Audiosignale bis zu 100 m über ein geschirmtes CATx-Kabel
  • Automatische Umschaltung zwischen den Eingängen
  • Für Computer- und Videoauflösungen bis zu 4K
  • Embedding von analogem Stereo-Audio
  • Möglichkeit zur Fernspeisung
  • Es wird ausdrücklich geschirmtes XTP DTP 24-Twisted Pair-Kabel von Extron für eine optimale Leistung empfohlen
Modell Beschreibung der Version Teilenummer
DTP T UWP 4K 332 D Sender für HDMI und VGA im Decorator-Format, Schwarz - 100 m 60-1755-52
DTP T UWP 4K 332 D Sender für HDMI und VGA im Decorator-Format, Weiß - 100 m 60-1755-53
DTP T UWP 4K 232 D Sender für HDMI und VGA im Decorator-Format, Schwarz - 70 m 60-1755-12
DTP T UWP 4K 232 D Sender für HDMI und VGA im Decorator-Format, Weiß - 70 m 60-1755-13

Technische Daten

Technische Daten

DTP T UWP 4K 332 D
specification
   
    Frame rate 1  24, 25, or 30 fps
    Chroma sampling 1  4:4:4, 4:2:2
    Color bit depth 1  8 bits per color
    Signal type  DVI 1.0, HDMI 1.4, HDCP 1.4
    Max. video data rate  10.2 Gbps (3.4 Gbps per color)
    NOTE     1Subject to the maximum data rate limit. Use our calculator www.extron.com/4Kdatarate to determine video parameters supported by this data rate.
Video
    NOTE     *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
    Maximum data rate 
       HDMI  10.2 Gbps (3.4 Gbps per color)
       VGA  6.75 Gbps (2.25 Gbps per color)
    Maximum pixel clock 
       HDMI  300 MHz
       VGA  165 MHz
    Resolution range  Up to 1920x1200 or 1080p @ 60 Hz; 8 bit color depth
2048x1080 (2K) @ 60 Hz,
4K (4096x2160) @ 30 Hz or 4K UHD (3840 x 2160) @ 30 Hz; 8-bit color
    Formats  RGB digital video
    Standards  DVI 1.0, HDMI, HDCP 1.2, EDID 1.3, CEA-861E
Video input — HDMI
    Number/signal type  1 single link HDMI (or DVI-D*) input
    Connectors  1 female HDMI type A
Video input — VGA
    Number/signal type  1 analog RGBHV
    Connectors  1 female 15-pin HD (RGB)
    Nominal level  0.7 Vp-p for RGB
    Minimum/maximum levels  0.3 V to 1.45 Vp-p
    Impedance  75 ohms
    Horizontal frequency  15 kHz to 130 kHz
    Vertical frequency  30 Hz to 150 Hz
    Return loss  <-30 dB @ 5 MHz
    DC offset (max. allowable)  250 mV
Interconnection between transmitter and receiver
    Signal type  1 DTP 330 output
    Connectors  1 female RJ-45
    Termination standards  TIA/EIA T568B
    Signal transmission distance 
       1080p @ 60 Hz  Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 cable
       2048x1080 (2K) @ 60 Hz  Up to 330' (100 m) using STP cable or XTP DTP 24 cable
       4K/UHD @ 30 Hz  Up to 330' (100 m) using STP cable or XTP DTP 24 cable
       Cable requirements  Solid conductor, 24 AWG or better
       Cable recommendations  400 MHz bandwidth STP cable
    NOTE     Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
Audio
    Gain  Unbalanced output: 0 dB; balanced output +6 dB
    Frequency response  20 Hz to 20 kHz, ±0.5 dB
    THD + Noise  0.03% @ 20 Hz to 20 kHz at maximum output
    S/N  >90 dB, at maximum output (15 dBu), balanced (unweighted)
    Stereo channel separation  >80 dB @ 1 kHz to 20 kHz
Audio input
    Number/signal type 
       Analog audio (over DTP)  2 stereo, unbalanced
       Digital audio  1 embedded digital audio on DTP
       Embedded digital audio source formats  2-ch PCM, PCM, Dolby Digital 2/0, Dolby Digital 2/0 Surround, Dolby Digital 5.1, Dolby Digital EX, DTS Digital Surround 5.1, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
    Connectors  (2) 3.5 mm stereo jack, 2 channel; tip (L); ring (R); sleeve (ground)
    Impedance  >10k ohms, DC coupled
    Nominal level  -10 dBV (316 mVrms)
    Maximum level  +7 dBu, unbalanced
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output
    Number/signal type 
       Analog audio (over DTP)  1 stereo, unbalanced
       Digital audio  1 embedded digital audio on DTP
       Embedded digital audio source formats  2-ch PCM, PCM, Dolby Digital 2/0, Dolby Digital 2/0 Surround, Dolby Digital 5.1, Dolby Digital EX, DTS Digital Surround 5.1, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
    Connectors  1 female RJ-45 jack
Communications — transmitter
    Serial control port  RS-232 via (1) 3.5 mm, 5-pole captive screw connector for RS-232 control (±5 V) and contact closure input switching
    Baud rate and protocol  9600 baud rate, 8 data bits, 1 stop bit, no parity
    Contact closure remote control  (1) 3.5 mm, 5-pole captive screw connector (connector is shared with RS-232 control port)
    USB control port  1 front panel female mini USB type B
    USB standards  USB 2.0, high speed
    Program control  Extron Simple Instruction Set (SIS™)
Communications — external device (pass-through)
    Serial control pass-through port  Bidirectional RS-232
    Connector 
       DTP output  (1) 3.5 mm captive screw connector, 5-pole
    Baud rate and protocol  300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity
    NOTE     Protocol is mirrored between the connected DTP 230 or DTP 330 endpoints and the "Over DTP" ports on the DTP T UWP 4K 332 D. Signals from a control device pass into each "Over DTP" port, are embedded with the DTP signal and sent to the individual DTP 230 Tx or Rx endpoints for control of remote sink or source devices.
General
    Power supply  External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts
    Power consumption 
       Transmitter 
          Device  4.8 watts, 12 VDC
          Device and power supply  6.3 watts, 100-240 VAC, 50-60 Hz
    NOTE     Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the twisted pair cable.
    Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling  Convection, no vents
    Thermal dissipation 
       Transmitter 
          Device  15.3 BTU/hr
          Device and power supply  20.1 BTU/hr
    Mounting 
       Rack mount  Yes, with included rack ears
    Enclosure type  Metal
    Enclosure dimensions 
       Faceplate  Two 2.60" H* x 1.30" W x 0.20" D
(66 mm H x 33 mm W x 6 mm D)
(Fits the opening in a 2-gang decorator wallplate.)
       Device  Two 2.70" H x 3.50" W x 1.90" D
(69 mm H x 89 mm W x 48 mm D)
    NOTE     *Height is 4.2" (10.4 cm) including mounting tabs.
    Product weight  0.4 lbs (0.2 kg)
    Regulatory compliance  AS/NZS, c-UL, C-tick, CE**, FCC Class A**, ICES, UL, VCCI Complies with the appropriate requirements of RoHS, WEEE
    NOTE     **CE and FCC testing is conducted with STP cable.
    Product warranty  3 years parts and labor
    Everlast power supply warranty  7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
    NOTE     Shipping dimensions and weights are available at www.extron.com.
(4421-092818)