DTP DVI 4K 230 D Tx

€ 708.00

  • inkl. 20 % USt zzgl. Versandkosten
    zurzeit nicht lagernd:
    Lieferzeit 5-7 Tage*

    *Alle Lieferzeiten sind ungefähre Angaben und können von der tatsächlichen Lieferzeit abweichen!

Hersteller
Extron
Art.Nr.
60-1442-12
EAN
60-1442-12

Produktbeschreibung

Hauptmerkmale

  • Überträgt Single Link DVI-D-, Steuerungs- und analoge Audiosignale bis zu 70 m über ein geschirmtes CATx-Kabel
  • Unterstützt Computer- und Video-Auflösungen bis zu 4K
  • Es wird nachdrücklich geschirmtes XTP DTP 24-Twisted Pair-Kabel von Extron für eine optimale Leistung empfohlen
  • Kompatibel mit geschirmtem CATx-Twisted Pair-Kabel
  • Akzeptiert zusätzliche analoge Stereo-Audiosignale
  • DVI-Durchschleifanschluss
Modell Beschreibung der Version Teilenummer
DTP DVI 4K 230 D Tx Sender im Decorator-Format - Schwarz - 70 m 60-1442-12
DTP DVI 4K 230 D Tx Sender im Decorator-Format - Weiß - 70 m 60-1442-13
DTP DVI 4K 230 D Tx Sender im Decorator-Format - Schwarz - 70 m 60-1214-12 AUS DEM PROGRAMM GENOMMEN
DTP DVI 4K 230 D Tx Sender im Decorator-Format - Weiß - 70 m 60-1214-13 AUS DEM PROGRAMM GENOMMEN

Technische Daten

Technische Daten

DTP DVI 4K 230 D Tx/Rx
specifications
   
    Frame rate 1  24, 25, 30, 50, or 60 fps
    Chroma sampling 1  4:4:4, 4:2:2, or 4:2:0
    Color bit depth 1  8 bits per color
    Signal type  HDMI 1.4, HDCP 2.2
    Max. video data rate  10.2 Gbps (3.4 Gbps per color)
    NOTE     1Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to determine video parameters supported by this data rate.
Video
    Maximum data rate  10.2 Gbps (3.4 Gbps per color)
    Maximum pixel clock  300 MHz
    Resolution range  Up to 2560x1600* @ 60 Hz or 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz,
4K/UHD @ 60 Hz with 4:2:0 chroma subsampling
(*Reduced blanking)
    Color bit depth  8, 10, or 12 bits — subject to the maximum data rate limit
    Formats  RGB and YCbCr digital video
    Standards  DVI 1.0, HDMI 1.4, HDCP 2.2
Video input and loop through — transmitter
    Number/signal type  1 single link DVI-D (or HDMI*) input
1 single link DVI-D (or HDMI*) local loop-through
    Connectors  2 female DVI-I
    NOTE     *Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output.
Interconnection between transmitter and receiver
    Connectors  1 female RJ-45 per unit for 1 cable connecting the transmitter and receiver
    Termination standards  TIA/EIA T568B
    DTP signal 
       Signal transmission distance 
          1080p @ 60 Hz  Up to 230' (70 m) using shielded twisted pair (STP) cable or XTP DTP 24 cable
          2560x1600 @ 60 Hz  Up to 130' (40 m) using STP cable or XTP DTP 24 cable
          4K/UHD @ 30 and 60 Hz  Up to 130' (40 m) using STP cable or XTP DTP 24 cable
       Cable requirements  Solid conductor, 24 AWG or better
       Cable recommendations  400 MHz bandwidth STP cable
    NOTE     Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
Video output — receiver
    Number/signal type  1 single link DVI-D (or HDMI*)
    Connectors  1 female DVI-I
Audio
    Gain  Unbalanced output: 0 dB
    Frequency response  20 Hz to 20 kHz, ±1 dB
    THD + Noise  0.03% @ 1 kHz at nominal level, 0.3% @ 20 kHz at nominal level
    S/N  >90 dB, at maximum output (unweighted)
    Stereo channel separation  >80 dB @ 1 kHz to 20 kHz
Audio input — transmitter
    Number/signal type  1 PC level stereo, unbalanced
    NOTE     Analog audio is not embedded onto the digital video signal. Embedded digital audio is not de-embedded from the digital video signal.
    Connectors  (1) 3.5 mm stereo jack, 2 channel; tip (L); ring (R); sleeve (ground)
    Impedance  20k ohms, DC coupled
    Nominal level  -10 dBV (316 mVrms)
    Maximum level  +6 dBu, unbalanced
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output — receiver
    Number/signal type  1 stereo (2 channel), unbalanced
    Connectors  (1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground)
    Impedance  50 ohms, unbalanced
    Gain error  ±0.2 dB channel to channel
    Maximum level (600 ohm)  >+7 dBu, unbalanced at 1% THD+N
Control/remote — external device (pass-through, unidirectional or bidirectional)
    Serial control port input 
       Transmitter  RS-232 via (1) 3.5 mm, 5 pole captive screw connector
(connector is shared with IR control port)
       Receiver  1 set of proprietary signals on a female RJ-45 jack
    Serial control port output 
       Transmitter  1 set of proprietary signals on a female RJ-45 jack
       Receiver  RS-232 via a 3.5 mm, 5 pole captive screw connector
    NOTE     Protocol is mirrored between the transmitter and the receiver.
    Baud rate and protocol  300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity
    Serial control pin configuration  Captive screw connectors: 1 = Tx, 2 = Rx, 3 = Gnd
    IR control port  (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
    IR control pin configuration  3 = Gnd, 4 = IR Tx, 5 = IR Rx
General
    Power supply  External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts
    Power consumption 
       Transmitter 
          Device  3.3 watts, 12 VDC
          Device and power supply  4.6 watts, 100-240 VAC, 50-60 Hz
       Receiver 
          Device  4.3 watts, 12 VDC
          Device and power supply  5.9 watts, 100-240 VAC, 50-60 Hz
    NOTE     Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the twisted pair cable.
    Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling  Convection, no vents
    Thermal dissipation 
       Transmitter 
          Device  9.9 BTU/hr
          Device and power supply  14.5 BTU/hr
       Receiver 
          Device  13.3 BTU/hr
          Device and power supply  19.0 BTU/hr
    Mounting 
       Furniture or wall mount  Yes, with a 2-gang wall box or mud ring
    Enclosure type  Metal
    Enclosure dimensions 
       Faceplate  2.6" H x 2.6" W x 0.1" D
(6.6 cm H x 6.6 cm W x 0.3 cm D)
(Fits the opening in a 2-gang decorator wallplate.)
       Device  2.8" H x 3.5" W x 1.7" D
(7.1 cm H x 8.9 cm W x 4.3 cm D)
    NOTE     Height excludes mounting tabs, depth excludes connectors.
    Product weight  0.4 lbs (0.2 kg)
    Regulatory compliance   c-UL, C-tick, CE**, FCC Class A**, ICES, KC, UL, VCCI
    NOTE     **CE and FCC testing is conducted with STP cable.
    Product warranty  3 years parts and labor
    Everlast power supply warranty  7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
    NOTE     Shipping dimensions and weights are available at www.extron.com.
(4383-092818)
Versand-Abmessung und -Gewicht
    Teilenummer Höhe Breite Tiefe Gewicht
    60-1442-12 26,7 cm 19,1 cm 7,5 cm 0,84 kg
    60-1442-13 26,7 cm 19,1 cm 7,5 cm 0,84 kg