DVI DL 201

Technische Daten

DVI DL 201 Series
NOTE     *Dual link DVI is backwards compatible with all single link DVI/HDMI signals.
Video
Maximum data rate	10 Gbps (3.3 Gbps per color)
Maximum pixel clock	330 MHz (165 MHz per link)
Resolution range	Up to 2560x1600 @ 60 Hz
Formats	RGB and YCbCr digital video
Standards	DVI 1.0, HDMI
Video input and loop-through — transmitter
Number/signal type	1 dual link DVI-D* input 1 dual link DVI-D* local loop-through
Connectors	2 DVI-I female (1 for input, 1 for loop-through)
Interconnection between transmitter and receiver
Connectors	(3) RJ-45 per unit for 3 cables connecting the transmitter and receiver
Termination standards	TIA/EIA T568A or T568B
Signal transmission distance
1920x1200 or 1080p @ 60 Hz
Extron STP201 cable	Up to 150' (45 m)
2560x1600 @ 60 Hz
CAT 5/5e/6 STP or Extron STP201	Up to 125' (38 m)
CAT 5/5e/6 UTP cable	100' (30 m) Longer distances are possible with lower rates.
NOTE     The transmission distance varies greatly depending on the signal resolution and on the type of cable, graphics card, and display used in the system.
NOTE     Shielded twisted pair cable provides added protection from outside interference and increases overall signal transmission distance. Extron strongly recommends using shielded twisted pair for optimal performance.
Video output — receiver
Number/signal type	1 dual link DVI-D*
Connectors	1 DVI-I female
Control/remote — external device (pass-through)
Serial control port input
Transmitter	RS-232 via (1) 3.5 mm, 3 pole captive screw connector
Receiver	1 set of proprietary signals on a female RJ-45 jack
Serial control port output
Transmitter	1 set of proprietary signals on a female RJ-45 jack
Receiver	RS-232 via a 3.5 mm, 3 pole captive screw connector
NOTE     Protocol is mirrored between the transmitter and the receiver.
Serial control pin configurations	Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND
General
Recommended cable type	CAT 5/5e/6 (shielded or unshielded) or Extron STP201
Power supply	External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 2 A, 24 watts
Power consumption
DVI DL 201 Tx	8.1 watts, 12 VDC
DVI DL 201 Rx	9.4 watts, 12 VDC
NOTE     Each transmitter and receiver can be powered locally by an external power supply.  The receiver can be powered remotely by a power supply connected to the transmitter on the other end of the CAT 5/5e/6 or Extron STP201 cable.
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Mounting
Rack mount	Yes, with optional 1U rack shelf
Furniture mount	Yes, with optional through-desk mounting kit
Pole mount	Attachable to a projector pole mount using optional mounting kit
Enclosure type	Metal
Enclosure dimensions
DVI DL 201 Tx	1.75" H x 8.75" W x 3.0" D (1U high, half rack wide) 4.4 cm H x 22.2 cm W x 7.6 cm D (Depth excludes connectors.)
DVI DL 201 Rx	1.0" H x 4.3" W x 3.0" D (quarter rack wide) (2.5 cm H x 10.9 cm W x 7.6 cm D) (Depth excludes connectors.)
Product weight	Transmitter: 0.6 lbs (0.3 kg) Receiver: 0.3 lbs (0.1 kg) Transmitter and receiver: 0.9 lbs (0.4 kg)
Shipping weight	2 lbs (1 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick, FCC Class A**, ICES, VCCI
NOTE     **FCC testing is conducted with STP (shielded twisted pair) cable.
Product warranty	3 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(8.0-032112-D7)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-957-12	10,5 cm	31,3 cm	22,2 cm	1,27 kg
60-957-13	7,6 cm	26,7 cm	19,1 cm	0,39 kg