DTP HDMI 4K 330 Tx
EUR
588.00
€ 588.00
Hersteller
Extron
Art.Nr.
60-1331-12
EAN
60-1331-12
Produktbeschreibung
Hauptmerkmale
- Überträgt HDMI-, Steuerungs- und analoge Audiosignale bis zu 100 m über ein geschirmtes CATx-Kabel
- Unterstützt Computer- und Video-Auflösungen bis zu 4K
- Unterstützt HDMI-Spezifikationen, einschließlich Datenraten bis zu 10,2 Gbps, Deep Color bis zu 12 Bit, 3D, verlustfreier HD-Audioformate und CEC-Durchleitung
- Es wird ausdrücklich geschirmtes XTP DTP 24-Twisted Pair-Kabel von Extron für eine optimale Leistung empfohlen
- Kompatibel mit geschirmtem CATx-Twisted Pair-Kabel
- Verarbeitet zusätzliche analoge Stereo-Audiosignale
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
DTP HDMI 4K 330 Tx | HDMI-Sender - 100 m | 60-1331-12 | |
DTP HDMI 4K 230 Tx | HDMI-Sender - 70 m | 60-1271-12 |
Technische Daten
Technische Daten
-
DTP HDMI 330 4K Tx/Rx specification Frame rate 1 24, 25, 30, 50, or 60 fps Chroma sampling 1 4:4:4, 4:2:2, or 4:2:0 Color bit depth 1 8 bits per color Signal type HDMI 1.4, HDCP 2.2 Max. video data rate 10.2 Gbps (3.4 Gbps per color) NOTE 1Subject to the maximum data rate limit. Use our calculator (http://www.extron.com/product/videotools.aspx) to determine video parameters supported by this data rate. NOTE This product consists of a transmitter (DTP HDMI 4K 330 Tx) and a receiver (DTP HDMI 4K 330 Rx), sold separately, with twisted pair cables linking the transmitter and receiver. NOTE *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output. Video Maximum data rate 10.2 Gbps (3.4 Gbps per color) Maximum pixel clock 300 MHz Resolution range Up to 2560x1600* @ 60 Hz or
4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz,
4K/UHD @ 60 Hz with 4:2:0 chroma subsampling
(* reduced blanking)Color bit depth 8, 10, or 12 bits — subject to the maximum data rate limit Formats RGB and YCbCr digital video Standards DVI 1.0, HDMI 1.4, HDCP 2.2, CEA-861E Video input — transmitter Number/signal type 1 single link HDMI (or DVI-D*) Connectors 1 female HDMI type A Interconnection between transmitter and receiver Connectors 1 female RJ-45 per unit Termination standard TIA/EIA T568B Signal transmission distance 1080p @ 60 Hz Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable 2560x1600 @ 60 Hz Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable 4K/UHD @ 30Hz and 60 Hz Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable Cable requirements Solid conductor, 24 AWG or better Cable recommendations 400 MHz bandwidth, STP (shielded twisted pair) NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance. Video output — receiver Number/signal type 1 single link HDMI (or DVI-D*) Connectors 1 female HDMI type A Audio Gain Unbalanced output: 0 dB; balanced output +6 dB Frequency response 20 Hz to 20 kHz, ±0.5 dB THD + Noise 0.03% @ 20 Hz to 20 kHz at maximum output S/N >90 dB, at maximum output (15 dBu), balanced (unweighted) Stereo channel separation >80 dB @ 1 kHz to 20 kHz Audio input Number/signal type 1 PC level stereo, unbalanced NOTE Analog audio is not embedded onto the digital video signal. Embedded digital audio is not de-embedded from the digital video signal. Connectors (1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground) Impedance >10k ohms, DC coupled Nominal level -10 dBV (316 mVrms) Maximum level +6 dBV (unbalanced) NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu Audio output Number/signal type 1 stereo (2 channel), balanced/unbalanced Connectors (1) 3.5 mm captive screw connector, 5 pole Impedance 50 ohms unbalanced, 100 ohms balanced Gain error ±0.1 dB channel to channel Maximum level (600 ohm) >+11 dBu, balanced Communications — external device (pass-through, unidirectional or bidirectional) Serial control port input/output Transmitter RS-232 via (1) 3.5 mm, 5 pole captive screw connector for RS-232 control (±5 V) (connector is shared with IR control port) Receiver 1 set of proprietary signals on a female RJ-45 jack Serial control port output/input Transmitter 1 set of proprietary signals on a female RJ-45 jack Receiver RS-232 via a 3.5 mm, 3 pole captive screw connector Baud rate and protocol 300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity Serial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd IR control port (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHzIR control pin configuration 3 = Gnd, 4 = IR Tx, 5 = IR Rx General Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 wattsPower consumption Transmitter Device 2.5 watts, 12 VDC Device and power supply 3.4 watts, 100-240 VAC, 50-60 Hz Receiver Device 4.2 watts, 12 VDC Device and power supply 5.8 watts, 100-240 VAC, 50-60 Hz NOTE Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the twisted pair cable. Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Convection, no vents Thermal dissipation Transmitter Device 7.4 BTU/hr Device and power supply 10.4 BTU/hr Receiver Device 13.0 BTU/hr Device and power supply 18.7 BTU/hr Mounting Rack mount Yes, with optional 1U high rack shelf Furniture mount Yes, with optional under-desk mounting kit Enclosure type Metal Enclosure dimensions Transmitter 1.0" H x 4.3" W x 3.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)Receiver 1.0" H x 4.3" W x 6.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)Product weight Transmitter 0.5 lbs (0.3 kg) Receiver 1.0 lb (0.5 kg) Regulatory compliance CE, c-UL UL, CE**, C-tick, FCC Class A**, ICES, VCCI,
Complies with the appropriate requirements of RoHS, WEEE
UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply.NOTE **CE and FCC testing is conducted with STP (shielded twisted pair) I/O cable. Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (4483-101618-D17) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-1331-12 24,1 cm 18,1 cm 6,8 cm 0,73 kg