DTP R DP 4K 330
EUR
684.00
€ 684.00
Hersteller
Extron
Art.Nr.
60-1076-63
EAN
60-1076-63
Produktbeschreibung
Hauptmerkmale
- Empfängt DisplayPort-, Steuerungs- und analoge Audiosignale bis zu 100 m über ein geschirmtes CATx-Kabel
- Unterstützt Computer- und Video-Auflösungen bis zu 4K
- Es wird nachdrücklich geschirmtes XTP DTP 24-Twisted Pair-Kabel von Extron für eine optimale Leistung empfohlen
- Kompatibel mit geschirmtem CATx-Twisted Pair-Kabel
- Akzeptiert zusätzliche analoge Stereo-Audiosignale
- Bidirektionale RS-232- und IR-Durchleitung zur AV-Gerätesteuerung
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
DTP R DP 4K 230 | DisplayPort-Empfänger mit EDID Minder - 70 m | 60-1076-23 | |
DTP R DP 4K 330 | DisplayPort-Empfänger mit EDID Minder - 100 m | 60-1076-63 | |
DTP R DP 4K 330 | DisplayPort-Empfänger - 100 m | 60-1076-53 | |
DTP R DP 4K 230 | DisplayPort-Empfänger - 70 m | 60-1076-13 |
Technische Daten
Technische Daten
-
DTP T/R DP 4K 330 specification Frame rate 1 24, 25, 30 fps Chroma sampling 1 4:4:4 or 4:2:2 Color bit depth 1 8 bits per color Signal type DisplayPort, HDCP Max. video data rate 10.8 Gbps (2.7 Gbps per lane) NOTE 1Subject to the maximum data rate limit. Use our calculator (http://www.extron.com/product/videotools.aspx) to determine video parameters supported by this data rate. NOTE This product consists of a transmitter (DTP T DP 4K 330) and a receiver (DTP R DP 4K 330), sold separately, with a twisted pair cable linking the transmitter and receiver. Video Maximum data rate Up to 10.8 Gbps (2.7 Gbps per lane) Maximum pixel clock 300 MHz Resolution range Up to 2560x1600* @ 60 Hz or
4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz
(* reduced blanking)Color bit depth 8, 10, or 12 bits — subject to the maximum data rate limit Formats RGB and YCbCr digital video Standard DisplayPort 1.2, HDCP 1.4 NOTE Only Single Stream Transport (SST) is supported. Video input — transmitter Number/signal type 1 DisplayPort Connector 1 female DisplayPort Interconnection between transmitter and receiver Signal type DTP 330 Connector 1 female RJ-45 per unit Termination standard TIA/EIA T568B Signal transmission distance 1080p @ 60 Hz Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable 2560x1600 @ 60 Hz Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable 4K/UHD @ 30 Hz Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable Cable requirements Solid conductor, 24 AWG or better Cable recommendations 400 MHz bandwidth, STP (shielded twisted pair) NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance. NOTE Input and output mode signaling:
DTP: HDMI with embedded audio, analog audio, RS-232 and IR, and remote power
HDBaseT: HDMI with embedded audio plus RS-232 and IRVideo output — receiver Number/signal type 1 DisplayPort Connectors 1 female DisplayPort Audio Gain Unbalanced output: 0 dB; balanced output +6 dB Frequency response 20 Hz to 20 kHz, ±0.5 dB THD + Noise 0.03% @ 20 Hz to 20 kHz at maximum output S/N >90 dB, at maximum input (unweighted) Stereo channel separation >80 dB Digital sampling 48 kHz Bit depth 16 bit Audio input Signal type Analog audio (over DTP) Stereo (2 channel), balanced/unbalanced NOTE Analog audio is not embedded onto the DisplayPort signal. Embedded digital audio is not de-embedded from the DisplayPort signal. Digital audio Embedded digital audio on DTP signal Embedded digital audio source formats 2-ch PCM, PCM, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS Digital Surround 5.1, DTSES Matrix 6.1, DTS-ES Discrete 6.1 Connector (1) 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground) Impedance >10k ohms, DC coupled Nominal level -10 dBV (316 mVrms) Maximum level +7 dBV (unbalanced) NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu Audio output Signal type Analog audio (over DTP) Stereo (2 channel), balanced/unbalanced NOTE Analog audio is not embedded onto the DisplayPort signal. Embedded digital audio is not de-embedded from the DisplayPort signal. Digital audio Embedded digital audio on DTP signal Embedded digital audio source formats 2-ch PCM, PCM, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS Digital Surround 5.1, DTSES Matrix 6.1, DTS-ES Discrete 6.1 Impedance 50 ohms unbalanced, 100 ohms balanced Gain error ±0.2 dB channel to channel Maximum level (600 ohm) >+14 dBu, balanced Connectors Digital audio Female DisplayPort Analog audio (1) 3.5 mm captive screw connector, 5 pole Communications — external device (pass-through, unidirectional or bidirectional) Serial control port input/output Transmitter RS-232 via (1) 3.5 mm, 5 pole captive screw connector for RS-232 control (±5 V) (connector is shared with IR control port) Receiver 1 set of proprietary signals on a female RJ-45 jack Serial control port output/input Transmitter 1 set of proprietary signals on a female RJ-45 jack Receiver RS-232 via a 3.5 mm, 3 pole captive screw connector Baud rate and protocol 300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity Serial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd IR control port (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHzIR control pin configuration 3 = Gnd, 4 = IR Tx, 5 = IR Rx General Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 wattsPower consumption Transmitter Device 3.4 watts, 12 VDC Device and power supply 4.8 watts, 100-240 VAC, 50-60 Hz Receiver Device 5.5 watts, 12 VDC Device and power supply 6.8 watts, 100-240 VAC, 50-60 Hz NOTE Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the twisted pair cable. Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Convection, no vents Thermal dissipation Transmitter Device 13.4 BTU/hr Device and power supply 19.2 BTU/hr Receiver Device 17.8 BTU/hr Device and power supply 25.5 BTU/hr Mounting Rack mount Yes, with optional 1U high rack shelf Furniture mount Yes, with optional under-desk mounting kit Enclosure type Metal Enclosure dimensions Transmitter 1.0" H x 4.3" W x 6.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)Receiver 1.0" H x 4.3" W x 6.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)Product weight Transmitter 0.5 lbs (0.3 kg) Receiver 1.0 lb (0.5 kg) Regulatory compliance CE, c-UL, UL, CE**, C-tick, FCC Class A**, ICES, VCCI Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (4326-083118-D12) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-1076-63 6,0 cm 19,1 cm 14,9 cm 0,36 kg 60-1076-53 6,0 cm 19,1 cm 14,9 cm 0,36 kg