DTP R HWP 4K 231 D

Technische Daten

DTP R HWP 4K 231 D
specifications
Frame rate 1	24, 25, 30, 50, or 60 fps
Chroma sampling 1	4:4:4, 4:2:2, or 4:2:0
Color bit depth 1	8 bits per color
Signal type	HDMI 1.4, HDCP 2.2
Max. video data rate	10.2 Gbps (3.4 Gbps per color)
NOTE     1Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to determine video parameters supported by this data rate.
Video
HDMI input
Maximum data rate	10.2 Gbps (3.4 Gbps per color)
Maximum pixel clock	300 MHz
Resolution range	Up to 2560x1600* @ 60 Hz or 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz, 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling (*Reduced blanking)
Color bit depth	8, 10, or 12 bits — subject to the maximum data rate limit
Formats	RGB and YCbCr digital video
Standards	DVI 1.0, HDMI 1.4, HDCP 2.2, CEA-861E
Video input
NOTE     *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
Number/signal type	1 single link HDMI (or single link DVI-D*) input
Connectors	1 female HDMI, type A
Interconnection between transmitter and receiver
Signal type	1 DTP 230 input
Connectors	1 female RJ-45 jack
Termination standards	TIA/EIA-T568B
DTP signal
Signal transmission distance
1080p @ 60 Hz	Up to 230' (70 m) using shielded twisted pair (STP) cable or XTP DTP 24 cable
2560x1600 @ 60 Hz	Up to 130' (40 m) using STP cable or XTP DTP 24 cable
4K/UHD @ 30 and 60 Hz	Up to 130' (40 m) using STP cable or XTP DTP 24 cable
Cable requirements	Solid conductor, 24 AWG or better
Cable recommendations	400 MHz bandwidth STP cable
NOTE     Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
NOTE     Output mode signaling: DTP:             HDMI with embedded audio, analog audio, RS-232 and IR, and remote power HDBaseT:   HDMI with embedded audio plus RS-232 and IR
Audio
Gain	Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response	20 Hz to 20 kHz, ±0.5 dB
THD + Noise	0.03% @ 20 Hz to kHz at maximum output
S/N	>90 dB at maximum output (15 dBu), balanced (unweighted)
Stereo channel separation	>80 dB @ 1 kHz to 20 kHz
Audio output
Number/signal type	1 stereo, balanced/unbalanced
Connectors	(1) 3.5 mm 5-pole captive screw
Impedance	50 ohm, unbalanced
Gain error	±0.2 dB channel to channel
Maximum level	>+14 dBu, balanced
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
NOTE     Analog audio is not embedded onto the HDMI/digital signal. Analog audio and embedded digital audio are transmitted simultaneously and output on the receiver on two different connectors.
General
Power supply	External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts
Power consumption
Device	TBD
Device and power supply	TBD
NOTE     Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the twisted pair cable.
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Thermal dissipation
Device	TBD
Device and power supply	TBD
Enclosure type	Metal
Enclosure dimensions
Faceplate	2.6" H* x 1.3" W x 0.2" D (6.6 cm H* x 3.3 cm W x 0.6 cm D) Fits the opening in a 1 gang decorator wallplate
Device	4.2" H x 1.7" W x 2.2" D (10.7 cm H x 4.3 cm W x 5.8 cm D)
Product weight	0.34 lbs (0.15 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	c-UL, UL
EMI/EMC	CE**, C-tick, FCC Class A**, ICES, VCCI
Environmental	Complies with the appropriate requirements of RoHS, WEEE
NOTE     **CE and FCC testing is conducted with STP cable.
Product warranty	3 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
NOTE     Shipping dimensions and weights are available at www.extron.com.
(3940-040717)