DTP R HWP 4K 331 D
EUR
816.00
€ 816.00
Hersteller
Extron
Art.Nr.
60-1531-52
EAN
60-1531-52
Produktbeschreibung
Hauptmerkmale
- Empfängt HDMI-, Steuerungs- und analoge Audiosignale bis zu 100 m über ein geschirmtes CATx-Kabel
- Für Computer- und Videoauflösungen bis zu 4K
- Es wird ausdrücklich geschirmtes XTP DTP 24-Twisted Pair-Kabel von Extron für eine optimale Leistung empfohlen
- Kompatibel mit geschirmtem CATx-Twisted Pair-Kabel
- Akzeptiert zusätzliche analoge Stereo-Audiosignale
- JITC-zertifiziert
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
DTP R HWP 4K 331 D | DTP-Empfänger für HDMI - Decorator-Format - Schwarz - 100 m | 60-1531-52 | |
DTP R HWP 4K 331 D | DTP-Empfänger für HDMI - Decorator-Format - Weiß - 100 m | 60-1531-53 | |
DTP R HWP 4K 231 D | DTP-Empfänger für HDMI - Decorator-Format - Schwarz - 70 m | 60-1531-12 | |
DTP R HWP 4K 231 D | DTP-Empfänger für HDMI - Decorator-Format - Weiß - 70 m | 60-1531-13 |
Technische Daten
Technische Daten
-
DTP R HWP 4K 331 D specifications Frame rate 1 24, 25, 30, 50, or 60 fps Chroma sampling 1 4:4:4, 4:2:2, or 4:2:0 Color bit depth 1 8 bits per color Signal type HDMI 1.4, HDCP 2.2 Max. video data rate 10.2 Gbps (3.4 Gbps per color) NOTE 1Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to determine video parameters supported by this data rate. Video HDMI input Maximum data rate 10.2 Gbps (3.4 Gbps per color) Maximum pixel clock 300 MHz Resolution range Up to 2560x1600* @ 60 Hz or 4K (4096x2160) @ 30 Hz,
UHD (3840x2160) @ 30 Hz, 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling
(*Reduced blanking)Color bit depth 8, 10, or 12 bits — subject to the maximum data rate limit Formats RGB and YCbCr digital video Standards DVI 1.0, HDMI 1.4, HDCP 2.2, CEA-861E Video input NOTE *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output. Number/signal type 1 single link HDMI (or single link DVI-D*) input Connectors 1 female HDMI, type A Interconnection between transmitter and receiver Signal type 1 DTP 330 input Connectors 1 female RJ-45 jack Termination standards TIA/EIA-T568B DTP signal Signal transmission distance 1080p @ 60 Hz Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 24 cable 2560x1600 @ 60 Hz Up to 330' (100 m) using STP cable or XTP DTP 24 cable 4K/UHD @ 30 and 60 Hz Up to 330' (100 m) using STP cable or XTP DTP 24 cable Cable requirements Solid conductor, 24 AWG or better Cable recommendations 400 MHz bandwidth STP cable NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance. NOTE Output mode signaling:
DTP: HDMI with embedded audio, analog audio, RS-232 and IR, and remote power
HDBaseT: HDMI with embedded audio plus RS-232 and IRAudio Gain Unbalanced output: 0 dB; balanced output: +6 dB Frequency response 20 Hz to 20 kHz, ±0.5 dB THD + Noise 0.03% @ 20 Hz to kHz at maximum output S/N >90 dB at maximum output (15 dBu), balanced (unweighted) Stereo channel separation >80 dB @ 1 kHz to 20 kHz Audio output Number/signal type 1 stereo, balanced/unbalanced Connectors (1) 3.5 mm 5-pole captive screw Impedance 50 ohm, unbalanced Gain error ±0.2 dB channel to channel Maximum level >+14 dBu, balanced NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu NOTE Analog audio is not embedded onto the HDMI/digital signal. Analog audio and embedded digital audio are transmitted simultaneously and output on the receiver on two different connectors. General Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 wattsPower consumption Device TBD Device and power supply TBD NOTE Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the twisted pair cable. Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Convection, no vents Thermal dissipation Device TBD Device and power supply TBD Enclosure type Metal Enclosure dimensions Faceplate 2.6" H* x 1.3" W x 0.2" D
(6.6 cm H* x 3.3 cm W x 0.6 cm D)
Fits the opening in a 1 gang decorator wallplateDevice 4.2" H x 1.7" W x 2.2" D
(10.7 cm H x 4.3 cm W x 5.8 cm D)Product weight 0.34 lbs (0.15 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety c-UL, UL EMI/EMC CE**, C-tick, FCC Class A**, ICES, VCCI Environmental Complies with the appropriate requirements of RoHS, WEEE NOTE **CE and FCC testing is conducted with STP cable. Product warranty 3 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. NOTE Shipping dimensions and weights are available at www.extron.com. (3952-040717)