DTP T HD2 4K 230

Technische Daten

DTP T HD2 4K 230
specifications
Frame rate 1	24, 25, 30, 50, or 60 fps
Chroma sampling 1	4:4:4, 4:2:2, or 4:2:0
Color bit depth 1	8 bits per color
Signal type	HDMI, HDCP
Max. video data rate	10.2 Gbps (3.4 Gbps per color)
NOTE     1Subject to the maximum data rate limit. Use our calculator (https://www.extron.com/product/videotools.aspx) to determine video parameters supported by this data rate.
Video
Maximum data rate	10.2 Gbps (3.4 Gbps per color)
Maximum pixel clock	300 MHz
Resolution range	Up to 2560x1600* @ 60 Hz or 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz, 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling (*Reduced blanking)
Color bit depth	8, 10, or 12 bits — subject to the maximum data rate limit
Formats	RGB and YCbCr digital video
Standard	DVI 1.0, HDMI, HDCP, CEA-861E
Video input
NOTE     *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
Number/signal type	1 single link HDMI (or DVI-D*)
Connector	1 female 19-pin HDMI type A
Input cable length	Up to 50' (15 m) with 225 MHz signal, 100' (30 m) with 165 MHz signal
Video output
Number/signal type	1 single link HDMI (Loop Thru) 1 DTP 230 (Output)
Interconnection between transmitter and receiver
Connector	1 RJ-45 jack
Termination standard	TIA/EIA T568B
Signal transmission distance
1080p @ 60 Hz	Up to 230' (70 m) using shielded twisted pair (STP) cable or XTP DTP 24 cable
2560x1600 @ 60 Hz	Up to 130' (40 m) using STP cable or XTP DTP 24 cable
4K/UHD @ 30 and 60 Hz	Up to 130' (40 m) using STP cable or XTP DTP 24 cable
Cable requirements	Solid conductor, 24 AWG or better
Cable recommendations	400 MHz bandwidth, STP (shielded twisted pair)
NOTE     Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
NOTE     Output mode signaling: DTP:             HDMI with embedded audio, analog audio, RS-232 and IR, and remote power HDBaseT:   HDMI with embedded audio plus RS-232 and IR
Control/remote
USB control port	1 front panel female mini USB B
USB standards	USB 2.0, low speed
Program control	Extron Simple Instruction Set (SIS™), Extron Product Configuration Software (PCS)
Communications — external device (RS-232/IR over TP)
NOTE     Protocol is mirrored between the connected DTP 230 Rx or DTP 330 Rx endpoints and the "Over TP" ports on the DTP T HD2 4K series. Signals from a control device pass into each "Over TP" port, are embedded with the DTP signal, and sent to the individual DTP 230 Rx or DTP 330 Rx endpoints for control of remote sink or source devices. The "Over TP" ports are simply pass-through connections to DTP endpoints. There is no RS-232 or IR insertion from any DTP T HD2 4K control port to the "Over TP" ports.
Serial control port	RS-232 via (1) 3.5 mm, 5-pole captive screw connector (connector is shared with IR control ports)
Baud rate and protocol	300 to 115200 baud, 8 or 7 data bits, 1 or 2 stop bits, non-parity (default), even or odd parity
Serial control pin configuration	Captive screw connectors: 1 = Tx, 2 = Rx, 3 = Gnd
IR pass-through control port	(1) 3.5 mm, 5-pole captive screw connector (connector is shared with RS-232 control port) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
IR control pin configuration	3 = Gnd, 4 = IR Tx, 5 = IR Rx
General
Power supply	External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts
Power consumption
Device	10.3 watts
Device and power supply	12.8 watts
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, with vents
Thermal dissipation
Device	18.1 BTU/hr
Device and power supply	26.8 BTU/hr
Rack mount	Yes
Enclosure type	Metal
Enclosure dimensions	1.0" H x 4.3" W x 6.0" D (1" high, 1/4 rack wide) 2.5 cm H x 10.9 cm W x 15.2 cm D (depth excludes connectors)
Product weight	0.5 lb (0.3 kg)
Shipping weight	1.0 lb (0.5 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE**, C-tick, FCC Class A**, ICES, VCCI
NOTE     **CE and FCC testing is conducted with STP cable.
Product warranty	3 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(8.1-110315-D3)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-1491-12	7,5 cm	26,7 cm	19,1 cm	0,8 kg