DTP T HWP 4K 231 D

€ 612.00

  • inkl. 20 % USt zzgl. Versandkosten
    zurzeit nicht lagernd:
    Lieferzeit 5-7 Tage*

    *Alle Lieferzeiten sind ungefähre Angaben und können von der tatsächlichen Lieferzeit abweichen!

Hersteller
Extron
Art.Nr.
60-1421-13
EAN
60-1421-13

Produktbeschreibung

Hauptmerkmale

  • Überträgt HDMI-, Steuerungs- und analoge Audiosignale bis zu 70 m über ein geschirmtes CATx?Kabel
  • Unterstützt Computer- und Video-Auflösungen bis zu 4K
  • Es wird nachdrücklich geschirmtes XTP DTP 24-Twisted Pair-Kabel von Extron für eine optimale Leistung empfohlen
  • Kompatibel mit geschirmtem CATx-Twisted Pair-Kabel
  • Akzeptiert zusätzliche analoge Stereo-Audiosignale
  • JITC-zertifiziert
Modell Beschreibung der Version Teilenummer
DTP T HWP 4K 231 D HDMI-Sender - Decorator-Format - Schwarz - 70 m 60-1421-12
DTP T HWP 4K 231 D HDMI-Sender - Decorator-Format - Weiß - 70 m 60-1421-13
DTP T HWP 4K 331 D HDMI-Sender - Decorator-Format - Schwarz 60-1421-52
DTP T HWP 4K 331 D HDMI-Sender - Decorator-Format - Weiß 60-1421-53

Technische Daten

Technische Daten

DTP T HWP 4K 231 D
specifications
   
    Frame rate 1  24, 25, 30, 50, or 60 fps
    Chroma sampling 1  4:4:4, 4:2:2, or 4:2:0
    Color bit depth 1  8 bits per color
    Signal type  HDMI 1.4, HDCP 2.2
    Max. video data rate  10.2 Gbps (3.4 Gbps per color)
    NOTE     1Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to determine video parameters supported by this data rate.
Video
    Maximum data rate  10.2 Gbps (3.4 Gbps per color)
    Maximum pixel clock  300 MHz
    Resolution range  Up to 2560x1600* @ 60 Hz or 4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz,
4K/UHD @ 60 Hz with 4:2:0 chroma subsampling
(*Reduced blanking)
    Color bit depth  8, 10, or 12 bits — subject to the maximum data rate limit
    Formats  RGB and YCbCr digital video
    Standards  DVI 1.0, HDMI 1.4, HDCP 2.2, CEA-861E
Video input
    Number/signal type  1 single link HDMI (or DVI-D*) input
    Connectors  1 female HDMI type A
    NOTE     *Appropriate HDMI to DVI-D cables or adapters are required for HDMI signal input/output.
Interconnection between transmitter and receiver
    Connectors  1 female RJ-45 per unit for 1 cable connecting the transmitter and receiver
    Termination standards  TIA/EIA T568B
    DTP signal 
       Signal transmission distance 
          1080p @ 60 Hz  Up to 230' (70 m) using shielded twisted pair (STP) cable or XTP DTP 24 cable
          2560x1600 @ 60 Hz  Up to 130' (40 m) using STP cable or XTP DTP 24 cable
          4K/UHD @ 30 and 60 Hz  Up to 130' (40 m) using STP cable or XTP DTP 24 cable
       Cable requirements  Solid conductor, 24 AWG or better
       Cable recommendations  400 MHz bandwidth STP cable
    NOTE     Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
    NOTE    

Output mode signaling:

DTP:            HDMI with embedded audio, analog audio, RS-232 and IR, and remote power
HDBaseT:    HDMI with embedded audio plus RS-232 and IR

Audio
    Gain  Unbalanced output: 0 dB; balanced output: +6 dB
    Frequency response  20 Hz to 20 kHz, ±0.5 dB
    THD + Noise  0.03% @ 20 Hz to 20 kHz at maximum output
    S/N  >90 dB at maximum output (15 dBu), balanced (unweighted)
    Stereo channel separation  >80 dB @ 1 kHz to 20 kHz
Audio input
    Number/signal type  1 stereo (2 channel), unbalanced
    NOTE     Analog audio is not embedded onto the digital video signal. Analog audio and digital embedded audio are transmitted simultaneously and output on the receiver on two different connectors.
    Connectors  (1) 3.5 mm stereo jack, 2 channel; tip (L); ring (R); sleeve (ground)
    Impedance  >10k ohms, DC coupled
    Nominal level  -10 dBV (316 mVrms)
    Maximum level  +7 dBV, unbalanced
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Communications — external device (RS-232/IR over TP)
    Serial control port  RS-232 via (1) 3.5 mm, 5 pole captive screw connector<BR>(connector is shared with IR control port)
    NOTE     Protocol is mirrored between the connected DTP 230 or DTP 330 endpoints and the "Over TP" ports on the
DTP T HWP 231 D. Signals from a control device pass into each "Over TP" port, are embedded with the DTP signal, and sent to the individual DTP 230 Tx or Rx endpoints for control of remote sink or source devices. The "Over TP" ports are simply pass-through connections to DTP endpoints.
    Baud rates  Up to 115200 baud
    Protocol  Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
    Serial control pin configuration  Captive screw connectors: 1 = Tx, 2 = Rx, 3 = Gnd
    IR control port  (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
    IR control pin configuration  3 = Gnd, 4 = IR Tx, 5 = IR Rx
General
    Power supply  External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts
    Power consumption 
       Device  4.6 watts, 12 VDC
       Device and power supply  6.1 watts, 100-240 VAC, 50-60 Hz
    NOTE     Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the twisted pair cable.
    Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling  Convection, no vents
    Thermal dissipation 
       Device  14.3 BTU/hr
       Device and power supply  19.7 BTU/hr
    Mounting 
       Furniture or wall mount  Yes, with a 1-gang wall box or mud ring
    Enclosure type  Metal
    Enclosure dimensions 
       Faceplate  2.6" H x 1.3" W x 0.3" D
(6.6 cm H x 3.3 cm W x 0.6 cm D)
       Device  2.8" H x 1.7" W x 1.9" D
(7.1 cm H x 4.3 cm W x 4.8 cm D)
    NOTE     Overall height is 4.2" (10.7 cm), including mounting tabs. Mounting holes are 3.2" (8.2 cm) apart on center.
?Depth excludes connectors. Fits the opening in a 1 gang decorator wallplate).
    Product weight  0.2 lbs (0.1 kg)
    Regulatory compliance  AN/NZS, c-UL, C-tick, CE**, FCC Class A**, ICES, UL
    NOTE     **CE and FCC testing is conducted with STP cable.
    Product warranty  3 years parts and labor
    Everlast power supply warranty  7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
    NOTE     Shipping dimensions and weights are available at www.extron.com.
(4455-092818)
Versand-Abmessung und -Gewicht
    Teilenummer Höhe Breite Tiefe Gewicht
    60-1421-12 7,5 cm 26,7 cm 19,1 cm 0,73 kg
    60-1421-13 7,5 cm 26,7 cm 19,1 cm 0,73 kg