€ 1536.00

  • inkl. 20 % USt zzgl. Versandkosten
    zurzeit nicht lagernd:
    Lieferzeit 5-7 Tage*

    *Alle Lieferzeiten sind ungefähre Angaben und können von der tatsächlichen Lieferzeit abweichen!

1 kg



  • Überträgt HDMI- oder analoge Video-, Steuerungs- sowie analoge Audiosignale bis zu 100 m über ein einzelnes CATx-Kabel
  • Automatische Umschaltung zwischen den Eingängen
  • Unterstützt Computer- und Video-Auflösungen bis zu 1920x1200, einschließlich 1080p/60 und 2K
  • Embedding von analogem Stereo-Audio
  • Möglichkeit zur Fernspeisung
  • Es wird ausdrücklich geschirmtes XTP DTP 24-Twisted Pair-Kabel von Extron für eine optimale Leistung empfohlen
Modell Beschreibung der Version Teilenummer
DTP T USW 333 Umschalter mit 2 HDMI- und 1 VGA-Eingang sowie Audio Embedding - 100 m 60-1551-52
DTP T USW 233 Umschalter mit 2 HDMI- und 1 VGA-Eingang sowie Audio Embedding - 70 m 60-1551-12
DTP T USW 333 Umschalter mit 2 HDMI- und 1 VGA-Eingang – 100 m 60-1329-52 AUS DEM PROGRAMM GENOMMEN

Technische Daten

Technische Daten

       Gain  Unity
       Bandwidth  170 MHz (-3 dB)
       Crosstalk  -50 dB @ 10 MHz, -30 dB @ 100 MHz
       Switching speed  <5 ms. (max)
       Maximum data rate  6.75 Gbps (2.25 Gbps per color)
       Maximum pixel clock  165 MHz
       Resolution range  Up to 1920x1200 or 1080p @ 60 Hz; 2k
       Formats  RGB and YCbCr digital video
       Standards  DVI 1.0, HDMI, HDCP 1.1, CEA-861E
Video input — HDMI
    Number/signal type  2 HDMI inputs (or single link DVI-D with the appropriate DVI-HDMI adapters)
    Connectors  2 female HDMI type A
Video input — VGA
    Number/signal type  1 VGA-QXGA; RGBHV
    Connectors  1 female 15-pin HD
    Nominal level  0.7 Vp-p
    Min./max. level  Analog, 0.3 V to 1.5 Vp-p with no offset
    Impedance  75 ohms
    Horizontal frequency  15 kHz to 145 kHz
    Vertical frequency  30 Hz to 170 Hz
    Return loss  <-40 dB @ 5 MHz
    NOTE     The VGA input is digitized and output as DTP. The VGA signal is not scaled.
Sync — VGA
    Input type  RGBHV, bi-level and tri-level sync
    Input level  1.9 V to 5.0 Vp-p
    S/N  >90 dB at maximum input (unweighted)
    Max. input voltage  5.0 Vp-p
Interconnection between transmitter and receiver
    Number/signal type  1 DTP 330 output
    Connector  1 female RJ-45
    Termination standard  TIA/EIA T568B
    Transmission distance  Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 STP cable
       Cable requirements  Solid conductor, 24 AWG or better
       Cable recommendations  400 MHz bandwidth, STP (shielded twisted pair)
       NOTE     Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
       NOTE     Input and output mode signaling:
DTP:        HDMI with embedded audio, analog audio, RS-232 and IR, and remote power
HDBT:    HDMI with embedded audio plus RS-232 and IR
    Gain  Unbalanced output: 0 dB; balanced output +6 dB
    Frequency response  20 Hz to 20 kHz, ±0.5 dB
    THD + Noise  0.01% @ 1 kHz at nominal level
    S/N  >90 dB, at maximum input (unweighted)
    Crosstalk  <-45 dB @ 20 kHz, or -72 dB @ 1 kHz or below
    Stereo channel separation  >80 dB @ 1 kHz to 20 kHz
Audio input
    Number/signal type  1 analog stereo, unbalanced or
2-digital audio, embedded in the HDMI
    Connectors  1 female 3.5 mm mini stereo jack
2 female HDMI type A (shared with video input)
    Source formats 
       HDMI  LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel
       Analog  Analog stereo audio
    Impedance  10k ohms, DC coupled
    Nominal level  -10 dBV
    Maximum level  +6dBV, unbalanced
    CMRR  >60 dB typ @ 1 kHz
    Input gain adjustment  -18 dB to +24 dB, 1 dB steps, adjustable per input
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output
    Number/signal type  1 analog audio over DTP signal, or
1 embedded digital audio over DTP signal
    Connectors  1 RJ-45 jack
Communications — switcher
    Serial control port  RS-232 via (1) 3.5 mm, 3 pole captive screw connector
    Serial control pin configuration  Pin 1 = Tx, pin 2 = Rx, pin 3 = Gnd
    Baud rate and protocol (RS-232)  9600 baud, 8 data bits, 1 stop bit, no parity
    Tally port  (1) 3.5 mm, 4 pole captive screw connector
    Tally port pin configuration  Pin 1 = input 1 tally, pin 2 = input 2 tally, pin 3 = input 3 tally, pin 4 = +5 VDC
    Contact closure remote control  (1) 3.5 mm, 4 pole captive screw connector
    Contact closure pin configuration  Pin 1 = input 1, pin 2 = input 2, pin 3 = input 3, pin 4 = Gnd
    USB control port  1 front panel female mini USB, type B
    USB standards  USB 2.0, high speed
    Program control  Extron Simple Instruction Set (SISTM)
Communications — RS-232/IR over DTP
    NOTE     Protocol is mirrored between the connected DTP 330 Rx and the Over DTP output port. Signals from a control device pass into the Over DTP port, are embedded with the DTP signal, and sent to the DTP 330 Rx endpoint for control of remote sink and source devices.

The Over DTP port is a pass-through connection to the DTP endpoint. There is no RS-232 or IR insertion from the DTP T USW 333 control port to the Over DTP port.
    Serial control pass-through port  1 RS-232 and IR via (1) 3.5 mm, 5-pole captive screw connector
    Serial control pin configuration  Pin 1 = Tx, pin 2 = Rx, pin 3 = Gnd
    Baud rates  300 to 115200 baud
    Protocol  8 or 7 data bits
1 or 2 stop bits
no parity (default)
even or odd parity
    IR pass-through control port  TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
    IR control pin configuration  3 = GND, 4 = IR Tx, 5 = IR Rx
    Power supply  External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts
    Power consumption 
       Device  5.5 watts
       Device and power supply  7.2 watts
    NOTE     The DTP T USW 333 can be powered either locally by the external power supply or remotely by a receiver on the other end of the twisted pair cable.
    Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling  Convection, vents on top and sides
    Thermal dissipation 
       Device  15.4 BTU/hour
       Device and power supply  21.0 BTU/hour
       Rack mount  Yes, with optional 1U high rack shelf
       Furniture mount  Yes, with optional under-desk mounting kit
    Enclosure type  Metal
    Enclosure dimensions  1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)
    Product weight  0.6 lbs (0.3 kg)
    Regulatory compliance  CE, c-UL UL, CE**, C-tick, FCC Class A**, ICES, VCCI,
Complies with the appropriate requirements of RoHS, WEEE
    NOTE     **CE and FCC testing is conducted with STP (shielded twisted pair) I/O cable.
    Product warranty  3 years parts and labor
    Everlast power supply warranty  7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
Versand-Abmessung und -Gewicht
    Teilenummer Höhe Breite Tiefe Gewicht
    60-1551-52 12,1 cm 28,1 cm 24,5 cm