HC 403

€ 1980.00

  • inkl. 20 % USt zzgl. Versandkosten
    zurzeit nicht lagernd:
    Lieferzeit 5-7 Tage*

    *Alle Lieferzeiten sind ungefähre Angaben und können von der tatsächlichen Lieferzeit abweichen!

2 kg



  • Vielseitige Lösung für kleine Besprechungsräume
  • Der Wandsender im Decorator-Format hat einen HDMI- und einen VGA-Eingang
  • Der HDMI-Eingang am Empfänger eignet sich ideal für den Anschluss einer lokalen Quelle, wie z. B. ein ShareLink-Funkgateway für Präsentationen in Arbeitsgruppen
  • Signalübertragung von Video, Audio und Strom bis zu 70 m über geschirmtes CATx-Kabel
  • Integrierte Steuerungsfunktionen
  • Automatische Umschaltung zwischen den Eingängen
Modell Beschreibung der Version Teilenummer
HC 403 System für die Zusammenarbeit in Arbeitsgruppen, Sender im Decorator-Format, Weiß 42-271-01
HC 403 System für die Zusammenarbeit in Arbeitsgruppen, Sender im Decorator-Format, Schwarz 42-271-02

Technische Daten

Technische Daten

HC 403 (HCT 102 D, HCR 102)
 NOTE     This product consists of a switching transmitter (HCT 102 D) and a scaling receiver (HCR 102), sold together as a system.
Video input
    Number/signal type 
       Analog  HCT 102 D: 1 VGA RGBHV
          HCT 102 D  1 HDMI (or single link DVI-D with the appropriate DVI-HDMI adapter)
          HCR 102  1 HDMI (or single link DVI-D with the appropriate DVI-HDMI adapter)
       HCT 102 D  1 female 15-pin HD
1 female HDMI type A
       HCR 102  1 female HDMI type A
    Nominal level  Analog: 0.7 Vp-p
    Min./max. level  Analog, 0.3 V to 1.5 Vp-p with no offset at unity gain
    Impedance  Analog: 75 ohms
    Horizontal frequency  Analog: 15 kHz to 100 kHz
    Vertical frequency  Analog: 30 Hz to 75 Hz
    HDMI equalization  Automatic
    HDMI input cable length  ?50' (15 m) for resolutions up to 1920x1200 or 1080p @ 60 Hz; 2K, using Extron HDMI Pro Series cable
    Resolution range  640x480 to 1600x1200 and 1920x1200*, 480p, 576p, 720p, 1080i, 1080p, and 2K
*reduced blanking
    Return loss  <-40 dB @ 5 MHz
    DC offset (max. allowable)  1.5 V
    Standards  DVI 1.0, HDMI 1.4, HDCP 1.4
Sync — VGA
    Input type  RGBHV, bi-level and tri-level sync
    Input level  1.9 V to 5.0 Vp-p
    S/N  >90 dB at maximum input (unweighted)
    Max. input voltage  5.0 Vp-p
Interconnection between transmitter and receiver
    Connector  1 female RJ-45 on each unit (transmitter and receiver)
    Termination standard  TIA/EIA T568B
    Transmission distance  Up to 230' (70 m) using shielded twisted pair (STP) cable or XTP DTP 24 STP cable with a 1080p, 60 Hz signal
       Cable requirements  Solid conductor, 24 AWG or better
       Cable recommendations  400 MHz bandwidth, STP (shielded twisted pair)
       NOTE     Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
Video processing
    Decoder  12 bit digital (3D-adaptive comb filter)
    Analog sampling  12 bits per color, 170 MHz standard (RGB)
    Digital pixel data bit depth  8, 10, or 12 bits per channel; 165 MHz pixel clock (HDMI)
    Colors  1 billion (10 bit processing)
Video output
    Number/signal type  1 HDMI (with CEC)
    Connectors  1 female HDMI
    HDMI peripheral device power  250 mA
    Scaled resolution  640x4806,8,9, 800x6006,8,9, 852x4806,8,9, 1024x7686,8,9, 1024x8526,8,9, 1024x10246,8,9, 1280x7686,8,9, 1280x8006,8,9, 1280x10246,8,9, 1360x7656,8,9, 1360x7686,8,9, 1365x7686,8,9, 1365x10246,8,9, 1366x7686,8,9, 1400x10506,8, 1440x9006,8,9, 1600x9006,8, 1600x12006,8, 1680x10506,8, 1920x12006,8
HDTV 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz,4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz, 9 = at 75 Hz
    Gain  Unbalanced output: 0 dB; balanced output +6 dB
    Frequency response  20 Hz to 20 kHz, ±0.5 dB
    THD + Noise  <0.1%, 20 Hz to 20k Hz at nominal level
    S/N  >90 dB, at maximum input (unweighted)
    Crosstalk  ?-80 dB @ 1 kHz, fully loaded
    Stereo channel separation  >80 dB @ 1 kHz
Audio input
    Number/signal type  2 analog stereo, unbalanced or
2 digital audio, embedded in the HDMI signal
    Connectors  2 female 3.5 mm mini stereo jacks; tip (L), ring (R), sleeve (ground)
2 female HDMI Type A
    Source formats 
       Analog  Analog stereo audio
       HDMI  LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel
    Impedance  10k ohms, DC coupled
    Nominal level  -10 dBV, unbalanced
    Maximum level  +6 dBV, unbalanced
    CMRR  >60 dB typical, unbalanced, @ 1 kHz
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output
    Number/signal type  1 analog, line level stereo, balanced or unbalanced (variable)
1 digital, embedded in HDMI (fixed)
    Connectors  (1) 3.5 mm captive screw connector, 5 pole
1 female HDMI
    Impedance  50 ohms unbalanced, 100 ohms balanced
    Gain error  ±0.5 dB channel to channel
    Maximum level (Hi-Z)  >+14 dBu, balanced; >+8 dBu, unbalanced
    Output volume range  0 to 100% in 1% steps
    Contact closure remote control  (1) 3.5 mm, 3 pole captive screw connector
    Contact closure pin configuration  Pin 1 = Gnd, pin 2 = input 2, pin 3 = input 3
    USB control port  1 front panel female USB mini-B
    USB standards  USB 2.0, high speed
    Program control  Extron Product Configuration Software (PCS) for Windows®
Communications — control processor
       SDRAM  512 MB
       Flash  512 MB
       Configuration software  Extron Global Configurator® Plus and Professional for Windows®
    Ethernet control 
       Network interface controllers (NICs)  1
       Connectors  1 female RJ-45 connector
       Data rate  10/100Base-T, half/full duplex with autodetect
       Default settings  Link speed and duplex level = autodetected
IP address =
Subnet mask =
Gateway =
DHCP = off
    Serial control 
       Quantity/type  1 bidirectional RS-232
       Connectors  (1) 3.5 mm captive screw connector, 3-pole
       Baud rate and protocol  300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits;
1 (default) or 2 stop bits;
no parity (default), even, or odd parity
       NOTE     This 3-pole port supports software flow control. The default is no flow control.
       Pin configuration  Pin 1 = Tx, 2 = Rx, 3 = Gnd
    Digital I/O control 
       Quantity/type  4 digital input/output (configurable)
       Connectors  (1) 3.5 mm captive screw connector, 6-pole
       Digital inputs 
          Input voltage range  0 to 24 VDC, clamped at +30 VDC
          Input impedance  >10k ohms
          Programmable pullup  1k ohms to +5 VDC
          Threshold low to high  2.8 VDC
          Threshold high to low  2.0 VDC
       Digital outputs  250 mA sink from 24 VDC max.
       Pin configurations  Pins 1, 2, 4, 5 = digital I/Os 1, 2, 3, 4; pins 3, 6= Gnd
    IR control 
       Quantity/type  1 programmable TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz
       Connector  (1) 3.5 mm captive screw connector, 2-pole
       Pin configuration  Pin 1 = signal, 2 = Gnd
       IR output carrier frequency  30 kHz to 300 kHz
    Power supply  External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 4.2 A, 50 watts
    Power consumption 
          Device  20.5 watts
          Device and power supply  23.0 watts
          NOTE     Connect the included 4.2 A, 50 W, external power supply to the HCR 102, and the receiver remotely powers the HCT 102 D. Alternatively, the transmitter can be powered locally by an optional external power supply.
    Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing
    Cooling  Convection, vents on top and sides
    Thermal dissipation 
          Device  68.9 BTU/hour
          Device and power supply  77.3 BTU/hour
      HCT 102 D
          Rack mount  Yes, with optional UCM R308 rack mounting panel
          Furniture or wall mount  Yes, with 2-gang junction box or mud ring mounting bracket and the included decorator-style wallplate, or with an optional AAP 424 panel
      HCR 102
          Rack mount  Yes, with optional 1U high rack shelf or back of the rack mounting kit
          Furniture mount  Yes, with included, attached MBU 125 under-desk mounting brackets
    Enclosure type  Metal
    Enclosure dimensions 
       HCT 102 D 
          Faceplate  2.6" H x 3.2" W x 0.2" D
(66 mm H x 81 mm W x 6 mm D)
(Fits the openings in a 2-gang decorator-style wallplate)
          Device  2.72" H x 3.48" W x 1.86" D
(69 mm H x 88 mm W x 47 mm D)
(Depth excludes connectors, height excludes mounting tabs.
Allow at least 3.0", 76 mm, depth in the wall or furniture.)
       HCR 102  1.0" H x 8.75" W x 6.0" D (half rack wide)
(25 mm H x 222 mm W x 152 mm D)
(Depth excludes connectors.)
    Product weight 
       HCT 102 D  0.7 lb (0.3 kg)
       HCR 102  1.2 lbs (0.6 kg)
    Regulatory compliance  CE**, C-tick, c-UL, FCC Class A**, ICES, UL, VCCI
Complies with the appropriate requirements of RoHS, WEEE
       NOTE     **CE and FCC testing is conducted with STP (shielded twisted pair) I/O cable.
    Product warranty  3 years parts and labor
    Everlast power supply warranty  7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
Versand-Abmessung und -Gewicht
    Teilenummer Höhe Breite Tiefe Gewicht
    42-271-01 14,6 cm 40,6 cm 30,5 cm 2,27 kg
    42-271-02 14,6 cm 40,6 cm 30,5 cm 2,27 kg
  • Kontakt

    Benötigen Sie technische Unterstützung

    Gerne stehen Ihnen unsere Mitarbeiter auch persönlich zur Verfügung. Rufen Sie uns an oder schreiben Sie uns eine Nachricht

  • Extron ProDSP Specialist

    Extron ProDSP Specialist

    Wir sind von der Firma Extron zertifiziert als Extron ProDSP Specialist.

  • Authorized Programmer

    Extron Authorized Programmer

    Wir sind von der Firma Extron zertifiziert als Authorized Programmer.

  • Extron Control Professional

    Extron Control Professional

    Wir sind von der Firma Extron zertifiziert als Extron Control Professional.