USB Extender Plus-Serie

€ 876.00

  • inkl. 20 % USt zzgl. Versandkosten
    zurzeit nicht lagernd:
    Lieferzeit 5-7 Tage*

    *Alle Lieferzeiten sind ungefähre Angaben und können von der tatsächlichen Lieferzeit abweichen!

Hersteller
Extron
Art.Nr.
60-1473-23
EAN
60-1473-23

Produktbeschreibung

Hauptmerkmale

  • Verlängert die Signale von USB-Peripheriegeräten bis zu 600 m über ein Gigabit-LAN
  • Punkt zu Punkt-Übertragung von USB-Peripheriegeräte-Signalen bis zu 100 m über ein CATx-Kabel
  • Unterstützt USB 2.0- bis 1.0-Geräte mit Datenraten bis zu 480 Mbps. Kompatibel mit USB 3.0-Geräten, die mit USB 2.0-Datenraten betrieben werden können
  • Der Empfänger hat einen integrierten Hub mit vier Anschlüssen und 5 V, 500 mA an jedem Port
  • Emulationsmodus für Peripheriegeräte
  • LED-Anzeigen für den Echtzeitstatus zur Fehlerbehebung und Überwachung
Modell Beschreibung der Version Teilenummer
USB Extender Plus T Sender 60-1471-12
USB Extender Plus R Empfänger 60-1471-13
USB Extender Plus D Sender - Decorator-Format - Weiß 60-1473-13
USB Extender Plus D Empfänger - Decorator-Format - Weiß 60-1473-23
USB Extender Plus AAP R Empfänger - AAP-Format - Schwarz 60-1472-22
USB Extender Plus AAP R Empfänger - AAP-Format - Weiß 60-1472-23
USB Extender Plus T HID HID-Sender 60-1539-12
USB Extender Plus R HID HID-Empfänger 60-1539-13
USB Extender Plus Matrix Controller Controller 42-267-01
USB Extender Plus AAP T Sender - AAP-Format - Schwarz 60-1472-12 AUS DEM PROGRAMM GENOMMEN

Technische Daten

Technische Daten

USB Extender Plus T/R Series
USB Extender Plus T/R Series
    USB host support  xHCI (USB 3.0), EHCI (USB 2.0), OHCI/UHCI (USB 1.1)
    USB data rates  Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps)
    USB host — Tx units 
       Number/signal type  1 USB
       Connectors  1 female USB type B
    USB hub — Rx units  
       Number/signal type  (1) 4-port USB hub
       Connectors  4 female USB type A
    Interconnection between transmitter and receiver 
       NOTE     This product supports the four types of data transfer defined by USB: bulk, control, interrupt, and isochronous transfers.
       Connectors  1 female RJ-45 per unit
       Termination standards  TIA 568B
       Signal transmission distance 
          Point to point  Up to 330' (100 m)
          Over the network  Up to 1980' (600 m)**
          NOTE     **Over the network distance is through connection of up to five network switches.
       NOTE     The transmission distance varies depending on the type of cable used in the system.
    Network 
       Protocol  Ethernet
       Transport  TCP/IP, UDP
       All supported  IPv4, IPv6, UDP, SSL, DHCP, HTTP, HTTPS, RTP, RTSP, SNMP, SNMP V2 (RFC 1213), SNMP V3 SNTP/NTP, SAP (RFC 2974), SDP (RFC 4566), QoS (RFC 2474), NTPv4 (RFC 4330), IGMP, Unicast or Multicast
       Standards  IEEE 802.3u (100Base-T), IEEE 802.3ab (1000Base-T)
       IP Configuration  Static IP (default) or DHCP
General — USB Extender Plus T/R
    Power supply  External
       Transmitter  Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 0.5 A, 6 watts
       Receiver  Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts
    Power consumption 
       Transmitter 
          Device  2.5 watts
          Device and power supply  3.4 watts
       Receiver 
          Device  12.4 watts
          Device and power supply  14.9 watts
    Enclosure type  Metal
    Enclosure dimensions 
       USB Extender Plus Rack Mount  ?1.0" H x 4.3" W x 6.0" D (quarter rack width)
(25 mm H x 109 mm W x 152 mm D)
(Depth excludes connectors.)
       USB Extender Plus AAP 
          Faceplate  1.4" H x 3.5" W x 0.1 " D
(36 mm H x 89 mm W x 2.5 mm D)
Double-space AAP
          Device  1.4" H x 2.7" W x 1.8" D
(36 mm H x 69 mm W x 46 mm D)
       USB Extender Plus D 
          Faceplate  2.6" H x 1.3" W x 0.1 " D
(66 mm H x 33 mm W x 2.5 mm D)
          Device  2.7" H x 1.7" W x 1.6" D
(69 cm H x 43 mm W x 41 mm D)
    Vibration  ISTA 1A in carton (International Safe Transit Association)
    Regulatory compliance  CE, c-UL, KCC, C-tick, FCC Class A, ICES, RoHS, VCCI Class AUL, WEEE
    Product warranty  3 years parts and labor
USB Plus Matrix Controller
    Memory 
       SDRAM  512 MB
       Flash  512 MB
    Ethernet control 
       Network interface controllers (NICs)  1
       Connectors  1 female RJ-45 connector
       Data rate  10/100/1000Base-T, half/full duplex with autodetect
       Protocols  DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
       Default settings  Link speed and duplex level = autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS: 127.0.0.1
    Serial control 
       Quantity/type  1 bidirectional RS-232
       Connectors  (1) 3.5 mm captive screw connector, 5 pole
       Baud rate and protocol  300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, or odd parity
General — USB Plus Matrix Controller
    Power supply  External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 0.5 A, 6 watts
    Power input requirements  12 VDC, 1 A, 12 watts, max.
Or power over Ethernet (PoE) (complies with PoE 802.3af, class 3)
    Power consumption 
       Device  1.5 watts, 12 VDC
       Device and power supply  2.0 watts, 100-240 VAC, 50-60 Hz
    Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling  Convection, no vents
    Thermal dissipation 
       Device  5.2 BTU/hr
       Device and power supply  6.8 BTU/hr
    Mounting 
       Rack mount  Yes, with optional 1U rack shelf or back of the rack mounting kit
       Furniture mount  Yes, with optional bracket kit
    Enclosure type  Metal
    Enclosure dimensions  1.0" H x 4.3" W x 6.0" D (1U high, quarter rack wide)
(25 mm H x 109 mm W x 152 mm D)
(Depth excludes connectors.)
    Product weight  0.6 lbs (0.3 kg)
    Regulatory compliance  CE, c-UL, UL, C-tick, FCC Class A, ICES, KCC, RoHS, WEEE, VCCI
    Product warranty  3 years parts and labor
    Everlast power supply warranty  7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(4349-D13)
Versand-Abmessung und -Gewicht
    Teilenummer Höhe Breite Tiefe Gewicht
    60-1471-12 26,7 cm 19,1 cm 7,5 cm 0,8 kg
    60-1471-13 26,7 cm 19,1 cm 7,5 cm 0,81 kg
    60-1473-13 7,6 cm 26,7 cm 19,1 cm 0,65 kg
    60-1473-23 7,6 cm 26,7 cm 19,1 cm 0,65 kg
    60-1472-22 7,6 cm 26,7 cm 19,1 cm 0,64 kg
    60-1472-23 7,6 cm 26,7 cm 19,1 cm 0,64 kg
    60-1539-12 26,7 cm 19,1 cm 7,5 cm 0,8 kg
    60-1539-13 26,7 cm 19,1 cm 7,5 cm 0,81 kg
    42-267-01 7,5 cm 26,7 cm 19,1 cm 0,84 kg