FOX 3G HD-SDI |
NOTE |
The FOX 3G HD-SDI is a transceiver that can function as a transmitter and/or as a receiver. Two units are required for a transmitter-receiver system with one fiber optic cable linking the two units. The FOX 3G HD-SDI is available in singlemode or multimode versions. |
|
NOTE |
These transceivers are class 1 laser products. They meet the safety regulations of IEC-60825. |
|
NOTE |
The FOX 3G HD-SDI P SM transceivers offer immunity to "pathological" signals, including test patterns defined by SMPTE Recommended Practice (RP) 178 and SMPTE RP 198 for SD-SDI, HD-SDI, and 3G-SDI. |
|
NOTE |
FOX 3G HD-SDI P SM transceivers are immune to pathological signals only when P model units are used in the transmitter, receiver, or Fiber Matrix Switcher boards. If the signal is routed through a matrix switcher without P model I/O boards, a FOX DA8, or a FOX SW8, the system does not provide immunity. |
|
|
Optical fiber interconnection between transmitter and receiver |
Number/type
|
1 fiber optic |
NOTE |
Only one fiber is required to transmit video and embedded audio and unidirectional data. |
|
Connectors
|
1 LC connector |
Operating distance
|
|
Singlemode
|
30 km (18.75 miles) with singlemode (SM) cables with an SM unit |
Multimode
|
500 m (1640') with 62.5 µm OM1 multimode (MM) cables with an MM unit 1 km (3280') with 50 µm OM2 multimode (MM) cables with an MM unit 2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimized multimode (MM) cables with an MM unit |
NOTE |
Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. |
|
Nominal peak wavelength
|
850 nm for MM units; 1310 nm for SM units |
Transmission power
|
|
Singlemode
|
-5 dBm, typical |
Multimode
|
-5 dBm, typical |
Maximum receiver sensitivity
|
|
Singlemode
|
-18 dBm, typical |
Multimode
|
-12 dBm, typical |
Optical loss budget
|
|
Singlemode
|
13 dB, maximum |
Multimode
|
7 dB, maximum |
|
Video |
Signal type
|
HD-SDI, SDI, and 3G-SDI digital video signals |
Gain
|
Unity |
Resolution
|
8 or 10 bits, automatic |
Data rates
|
270 Mbps, 1.485 Gbps, 2.970 Gbps |
Operation standards
|
|
All models
|
SMPTE 259M-C, SMPTE 292M, SMPTE 424M, ITU-R BT.601, ITU-R BT.1120 |
FOX 3G HD-SDI P
|
SMPTE 297-2006, SMPTE RP 178, SMPTE RP 198 |
Auto data rate lock
|
Yes |
|
Video input — transmitter |
Number/signal type
|
1 single link SDI, HD-SDI, or 3G-SDI digital component video |
Connectors
|
1 female BNC |
Data rates
|
19 Mbps to 2.97 Gbps |
Nominal level
|
0.8 Vp-p |
Minimum/maximum levels
|
0.5 V to 1 Vp-p with no offset |
Impedance
|
75 ohms |
Return loss
|
?15 dB @ 5 MHz to 1.5 GHz |
DC offset (max. allowable)
|
5 V |
Input coupling
|
AC |
Input cable equalization
|
Automatic for up to -30 dB of cable loss |
3G-SDI
|
60 m (200') using Extron RG6 cable 45 m (150') using Extron RG59 cable |
HD-SDI
|
120 m (400') using Extron RG6 cable 90 m (300') using Extron RG59 cable |
SDI
|
150 m (500') using Extron RG6 cable 120 m (400') using Extron RG59 cable |
|
Video output — receiver |
Number/signal type
|
2 single link SDI, HD-SDI, or 3G-SDI digital component video |
Connectors
|
2 female BNC |
Re-clocking
|
Automatic for 270 Mbps, 1.485 Gbps, 2.97 Gbps, or bypassed for unrecognized rates |
Nominal level
|
0.8 Vp-p |
Minimum/maximum levels
|
0.5 V to 1.0 Vp-p |
Impedance
|
75 ohms |
Return loss
|
>25 dB @ 100 MHz |
DC offset
|
±5 mV with input at 0 offset |
|
General |
Power supply
|
External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 0.5 A, 6 watts |
Power input requirements
|
12 VDC, 0.3 A |
Temperature/humidity
|
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Cooling
|
Convection, no vents |
Mounting
|
|
Rack mount
|
Yes, with optional rack shelf kit |
Furniture mount
|
Yes with optional through-desk or under-desk mounting kit |
Pole mount
|
Yes, with optional pole mounting kit |
Enclosure type
|
Metal |
Enclosure dimensions
|
1.0" H x 4.3" W x 3.0" D (quarter rack wide) (2.5 cm H x 10.9 cm W x 7.6 cm D) (Depth excludes connectors.) |
Product weight
|
0.5 lb (0.3 kg) per each unit |
Vibration
|
ISTA 1A in carton (International Safe Transit Association) |
Regulatory compliance
|
|
Safety
|
CE, c-UL, UL |
EMI/EMC
|
CE, C-tick, FCC Class A, ICES, VCCI |
Product warranty
|
3 years parts and labor |
NOTE |
All nominal levels are at ±10%. |
|
NOTE |
Specifications are subject to change without notice. |
|
(4511-D14) |