FOX II T DP 4K

Technische Daten

FOX II T/R DP 4K
specification
Frame rate 1	24, 25, 30, 50, 60, or 120 fps
Chroma sampling 1	4:4:4
Color bit depth 1	8 or 10 bits per color
Signal type	HDMI 1.4, DisplayPort 1.1a, HDCP 1.3
Max. video data rate	9.85 Gbps
NOTE     1Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to determine video parameters supported by this data rate.
NOTE     This product requires two parallel connections to achieve 4K at 50 or 60 fps at 8 bits per color.
NOTE     This product requires four parallel connections to achieve 4K at 50 or 60 fps at 10 bits per color.
NOTE     This product requires four parallel connections to achieve 4K at 120 fps at 8 bits per color.
NOTE     The analog audio signal(s) is (are) digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver.
NOTE     These transceivers are class 1 laser products. They meet the safety regulations of IEC-60825.
Optical fiber interconnection between transmitter and receiver
Number/type	2 fiber optic
Connectors	2 LC connectors
Operating distance
Singlemode	30 km (18.75 miles) with singlemode (SM) cables
Multimode	300 m (984') with 62.5 µm OM1 multimode (MM) cables 1 km (3280') with 50 µm OM2 multimode (MM) cables 2 km (6561') with 50 µm OM3/OM4 2000/4700 MHz bandwidth laser optimized multimode cables
NOTE     Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
Nominal peak wavelength	850 nm for multimode, 1310 nm for singlemode
Data rate	4.25 Gbps
Transmission power
Singlemode	-5 dBm, typical
Multimode	-5 dBm, typical
Maximum receiver sensitivity
Singlemode	-18 dBm, typical
Multimode	-12 dBm, typical
Optical loss budget
Singlemode	13 dB, maximum
Multimode	7 dB, maximum
Video
Maximum data rate	Up to 9.85 Gbps
Maximum pixel clock	300 MHz
Resolution range	640x480 up to 4096x2160 @ 30 Hz or UHD (3840x2160), including 2K, and 1920x1200, including 480p, 576p, 720p, 1080i @ 25/30 Hz, 1080p @ 50/60/120 Hz
Color bit depth	12 bits for resolutions up to 1080p, 10 bits for resolutions above 1080p
EDID	Supports emulation of custom or factory preset Extended Display Identification Data (EDID) tables.
Standards	DisplayPort 1.1a, HDMI 1.4, HDCP 1.3
Video input and loop through — transmitters
Number/signal type	1 DisplayPort input 1 DisplayPort loop-through
Connectors	1 female DisplayPort input 1 female DisplayPort loop-through
Video output — receiver
Number/signal type	1 DisplayPort
Connectors	1 female DisplayPort
Video delay	<1 frame
Audio
Gain
Range	Adjustable, -18 dB to +10 dB
Default
Captive screw connector	Balanced output: 0 dB; unbalanced output: -6 dB
Mini stereo jack	Unbalanced output: 0 dB
Frequency response	20 Hz to 20 kHz, ±0.5 dB
THD + Noise	0.10% @ 1 kHz at nominal level
S/N	>90 dB at maximum output (unweighted)
CMRR	65 dB @ 20 Hz to 20 kHz
Audio bits per sample	18 bits per channel, 2 channels (L, R)
Sampling rate	32 kHz, 44.1 kHz, 48 kHz
Audio input — transmitter
Number/signal type	1 digital audio, de-embedded from DisplayPort or 2 inputs: 1 balanced stereo 1 unbalanced stereo or 2 unbalanced mono
Connectors	1 female DisplayPort (shared with video input) (1) 3.5 mm stereo jack (1) 3.5 mm captive screw connector, 5 pole
Impedance	?10k ohms unbalanced, ?20k ohm balanced
Nominal level	+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level	+21.0 dBu, balanced at 1% THD+N (5-pole); +15.0 dBV, unbalanced (3.5 mm stereo)
Source formats	LPCM, Dolby Digital EX, Dolby Digital 2/0, Dolby Digital 2/0 Surround, DTS Digital Surround 5.1, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output — receiver
Number/signal type	1 digital audio, embedded with DisplayPort output 2 buffered outputs: 1 balanced stereo; 1 unbalanced stereo or 2 unbalanced mono
Connectors	1 female DisplayPort (shared with video output) (1) 3.5 mm stereo jack (1) 3.5 mm captive screw connector, 5 pole
Impedance	50 ohms unbalanced, 100 ohms balanced (analog only)
Nominal level	+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level (Hi-Z)	+12 dBu balanced, at 1% THD+N (5-pole); +9 dBu, unbalanced (3.5 mm stereo)
Audio delay	<1 frame
Source formats	LPCM, Dolby Digital EX, Dolby Digital 2/0, Dolby Digital 2/0 Surround, DTS Digital Surround 5.1, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
Audio return input — receivers
Number/signal type	1 stereo/mono, balanced
Connectors	(1) 3.5 mm captive screw connector, 5 pole
Impedance	?20k ohm balanced
Nominal level	+4 dBu (1.23 Vrms)
Maximum level (Hi-Z)	+12.0 dBu, balanced at 1% THD+N
Audio return output — transmitter
Number/signal type	1 stereo/mono, balanced
Connectors	(1) 3.5 mm captive screw connector, 5 pole
Impedance	100 ohms balanced (analog only)
Nominal level	+4 dBu (1.23 Vrms)
Maximum level (Hi-Z)	+12.0 dBu, balanced at 1% THD+N
Control/remote
Serial control ports on each unit (transmitter and receiver)
Control	1 female mini USB port B (front panel) 1 RS-232, 3.5 mm captive screw connector, 5-pole (3 pins are used), rear panel
Pass-through	1 RS-232, 3.5 mm captive screw connector, 5-pole (3 pins are used), rear panel
Baud rate and protocol
Control	9600 baud, 8 data bits, 1 stop bit, no parity
Pass-through	9600 to 115,200 baud
Serial control pin configuration	Captive screw: 1 = Tx, 2 = Rx, 3 = GND
Program control	Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™)
IR control port	(1) 3.5 mm captive screw connector, 5 pole (connector is shared with RS-232 pass thru) TTL level (0 to 5V) modulated infrared control from 30kHz to 40 kHz
IR control pin configuration	3 = GND, 4 = IR Tx, 5 = IR Rx
General
Power supply	Internal Input: 100-240 VAC, 50-60 Hz
Power consumption
Transmitter	18.4 watts
Receiver	16.5 watts
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Fan, front to back
Thermal dissipation
Transmitter	61.4 BTU/hr
Receiver	55.0 BTU/hr
Mounting
Rack mount	Yes, with optional rack shelf
Furniture mount	Yes, with optional under desk mounting kit
Enclosure type	Metal
Enclosure dimensions
Transmitter	1.65" H x 8.7" W x 8.5" D (half rack wide) (4.2 cm H x 22.1 cm W x 21.6 cm D) (Depth excludes connectors.)
Receiver	1.65" H x 8.7" W x 8.5" D (half rack wide) (4.2 cm H x 22.1 cm W x 21.6 cm D) (Depth excludes connectors.)
Product weight
Transmitter	2.1 lbs (1.0 kg)
Receiver	2.1 lbs (1.0 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick, FCC Class A, ICES, VCCI
Environmental	Complies with the appropriate requirements of RoHS, WEEE.
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(CMS-080817-D5)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-1462-11	10,2 cm	35,6 cm	33,0 cm	2,27 kg
60-1462-12	10,2 cm	35,6 cm	33,0 cm	2,27 kg