FOX T UWP 302
EUR
3600.00
€ 3600.00
Hersteller
Extron
Art.Nr.
60-1232-12
EAN
60-1232-12
Gewicht
1 kg
Produktbeschreibung
Hauptmerkmale
- Überträgt HDMI- oder analoges Video sowie Stereo-Audio über sehr lange Strecken mit Glasfaserkabel
- Vollständig digitale Technologie für eine pixelgenaue Übertragung von Signalen bis zu 1920x1200, einschließlich HDTV 1080p/60
- Digitale Umwandlung von analogen Video- und Audio-Eingangssignalen
- Automatische Umschaltung zwischen den Eingängen
- HDCP-konform
- Key Minder® überprüft kontinuierlich die HDCP-Konformität
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
FOX T UWP 302 MM | Multimode - Wandanschlussfeld mit Sender - Schwarz | 60-1232-11 | |
FOX T UWP 302 MM | Multimode - Wandanschlussfeld mit Sender - Weiß | 60-1232-13 | |
FOX T UWP 302 SM | Singlemode - Wandanschlussfeld mit Sender - Schwarz | 60-1232-12 | |
FOX T UWP 302 SM | Singlemode - Wandanschlussfeld mit Sender - Weiß | 60-1232-14 |
Technische Daten
Technische Daten
-
FOX T UWP 302 NOTE The FOX T UWP 302 is not compatible with the FOX 3G HD-SDI, FOX 3G DVC, or FOX AV models. NOTE These units are class 1 laser products. They meet the safety regulations of IEC-60825. NOTE *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output. Optical fiber interconnection between transmitter and receiver Number/type 1 or 2 fiber optic Connectors 2 LC connectors Operating distance Singlemode 30 km (18.75 miles) with singlemode (SM) cables Multimode 300 m (984') with 62.5 µm OM1 multimode (MM) cables
1 km (3280') with 50 µm OM2 multimode (MM) cables
2 km (6561') with 50 µm OM3/OM4 2000/4700 MHz bandwidth laser optimized multimode cablesNOTE Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. Nominal peak wavelength 850 nm for MM, 1310 nm for SM Data rate 4.25 Gbps Maximum pixel clock 165 MHz Transmission power Singlemode -5 dBm, typical Multimode -5 dBm, typical Maximum receiver sensitivity Singlemode -18 dBm, typical Multimode -12 dBm, typical Optical loss budget Singlemode 13 dB, maximum Multimode 7 dB, maximum Video Digital Resolution range 640x480 up to 1920x1200, 480p, 576p, 720p, 1080i, 1080p @ 60 Hz sampled pixel for pixel; higher resolution 2K (2048x1080) @ 60 Hz undersampled Resolution range 640x480 to 1920x1200*, 480p, 576p, 720p, 1080i, 1080p sampled pixel for pixel Formats RGB and YCbCr digital video Standards DVI 1.0, HDMI compliant, HDCP 1.1, CEA-861E Analog Maximum resolution Up to 1920x1200 or 1080p @ 60 Hz pixel for pixel Signal type VGA-UXGA RGBHV, RGBS, component video Gain Unity Pixel data bit depth 8 bits per channel, 3 channels (R, G, B; or YUV) Video input Digital Number/signal type 1 single link HDMI (HDCP compliant) Connectors 1 female 19-pin HDMI Type A Equalization Up to 50' of cable Analog Number/signal type 1 VGA-UXGA RGBHV, RGBS, component video (YUVp/HDTV) Connectors 1 female 15-pin HD Nominal level 1 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component videoMinimum/maximum levels Analog: 0.3 V to 0.75 Vp-p with no offset, terminated Impedance 75 ohms Horizontal frequency 30 kHz to 100 kHz Vertical frequency 24 Hz to 120 Hz Return loss <-40 dB @ 5 MHz Sync Input type RGBHV, RGBS, bi-level and tri-level component video (480p, 576p, 720p, 1080i, 1080p) Input level 2.5 V to 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video with tri-level sync
0.3 Vp-p for component video with bi-level syncInput impedance 510 ohms Polarity Positive or negative (follows input or can be set by user) Audio Gain Range Adjustable, -18 dB to +10 dB Default Unbalanced output: -6 dB Frequency response 20 Hz to 20 kHz ±0.5 dB THD + Noise 0.10% @ 1 kHz at nominal level S/N >80 dB at maximum output (unweighted) Audio bits per sample 18 bits per channel, 2 channels (L, R) Sampling rate 48 kHz Audio input Number/signal type 1 unbalanced stereo Connectors (1) 3.5 mm mini stereo jack Impedance >10k ohms unbalanced Nominal level -10 dBV (316 mVrms) Maximum level +7 dBV unbalanced NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu Communications Serial control port Control 1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used, "Remote RS-232", shared with alarm port), side panel Baud rate and protocol 9600 baud, 8 data bits, 1 stop bit, no parity Serial control pin configuration 1 = Tx, 2 = Rx, 3 = GND USB control port 1 front panel female mini USB B USB standards USB 2.0, low speed General Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 wattsPower consumption Device 6.1 watts, 12 VDC Device and power supply 7.7 watts, 100-240 VAC, 50-60 Hz Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensingCooling Convection, vents on the rear and sides Thermal dissipation Device 20.6 BTU/hr Device and power supply 26.2 BTU/hr Mounting Furniture or wall mount Yes, with standard decorator-style wall plate Enclosure type Metal Enclosure dimensions Faceplates Three [2.6" H* x 1.3" W x 0.3" D (6.6 cm H* x 3.3 cm W x 0.6 cm D)]
(Depth excludes connectors. Fits the openings in a 3 gang decorator-style wallplate.)
*Overall height is 4.1" (10.4 cm) including mounting tabs.Device 4.1" H x 5.36" W x 2.21" D (3-gang wide) Product weight 0.7 lbs (0.3 kg) per unit Regulatory compliance CE, c-UL UL, CE**, C-tick, FCC Class A**, ICES, VCCI,
Complies with the appropriate requirements of RoHS, WEEEProduct warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (4369-091118-D13) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-1232-11 10,2 cm 27,2 cm 23,5 cm 1,34 kg 60-1232-13 10,2 cm 27,2 cm 23,5 cm 1,34 kg 60-1232-12 10,2 cm 27,2 cm 23,5 cm 1,34 kg 60-1232-14 10,2 cm 27,2 cm 23,5 cm 1,34 kg