FOXBOX Tx HDMI

Technische Daten

FOXBOX Tx HDMI Series
NOTE     The analog audio signal(s) is (are) digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver.
NOTE     These transceivers are class 1 laser products. They meet the safety regulations of IEC-60825.
Optical fiber interconnection between transmitter and receiver
Number/type	2 fiber optic
Connectors	2 LC connectors
Operating distance
Singlemode	30 km (18.75 miles) with singlemode (SM) cables
Multimode	300 m (985') with 62.5 µm OM1 multimode (MM) cables 1 km (3280') with 50 µm OM2 multimode (MM) cables 2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimized multimode cable
NOTE     Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
Nominal peak wavelength	850 nm for MM, 1310 nm for SM
Data rate	4.25 Gbps
Transmission power
Singlemode	-5 dBm, typical
Multimode	-5 dBm, typical
Maximum receiver sensitivity
Singlemode	-18 dBm, typical
Multimode	-12 dBm, typical
Optical loss budget
Singlemode	13 dB, maximum
Multimode	7 dB, maximum
Video
NOTE     *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
Resolution range	640x480 up to 1920x1200 @ 60Hz, including 480p, 576p, 720p, 1080i, 1080p @ 60Hz, sampled pixel for pixel; higher resolution 2K (2048x1080) @ 60 Hz, undersampled
Formats	RGB and YCbCr digital video
EDID	Supports emulation of custom or factory preset Extended Display Identification Data (EDID) tables.
HDCP	Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards
Standards	DVI 1.0, HDMI, HDCP 1.1, CEA-861E
Video input and loop through
Number/signal type	1 single link HDMI input 1 single link HDMI loop-through
Connectors	2 female HDMI type A (1 for input, 1 for loop-through)
Nominal level	0.8 Vp-p
Video output — See the FOXBOX Rx HDMI receivers specifications
Audio
Gain
Range	Adjustable, -18 dB to +10 dB
Default	Unbalanced output: -6 dB; balanced output: 0 dB
Frequency response	20 Hz to 20 kHz, ±0.5 dB
THD + Noise	0.10% @ 1 kHz at nominal level
S/N	>80 dB at maximum output (unweighted)
CMRR	65 dB @ 20 Hz to 20 kHz
Audio bits per sample	18 bits per channel, 2 channels (L, R)
Sampling rate	48 kHz
Audio input
Number/signal type	1 unbalanced stereo or 2 unbalanced mono 1 stereo, de-embedded from HDMI (2-ch, PCM only)
Connectors	(1) 3.5 mm mini stereo jack 1 female HDMI, type A
Impedance	>10k ohms unbalanced, DC coupled
Nominal level	-10 dBV (316 mVrms)
Maximum level	+8.9 dBV, (unbalanced) at 1% THD+N
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output — See the FOXBOX Rx HDMI receivers specifications
Communications — transmitter
Serial control ports on each unit
Control	1 RS-232, 2.5 mm mini stereo jack (front panel)
Pass-through	1 RS-232, 3.5 mm captive screw connector, 5-pole (3 pins are used) (rear panel)
Baud rate and protocol
Control	9600 baud, 8 data bits, 1 stop bit, no parity
Pass-through	9600 to 115,200 baud
Serial control pin configuration	Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND Captive screw: 1 = Tx, 2 = Rx, 3 = GND
Program control	Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™)
General
Power supply	External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watts
Power consumption
Device	5.7 watts, 12 VDC
Device and power supply	7.2 watts, 12 VDC
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, vents on top and side panels
Thermal dissipation
Device	16.1 BTU/hr
Device and power supply	21.3 BTU/hr
Mounting
Rack mount	Yes, with optional rack shelf
Furniture mount	Yes, with optional under desk mounting kit
Enclosure type	Metal
Enclosure dimensions	1.0" H x 4.3" W x 6.0" D (quarter rack wide) (2.5 cm H x 10.9 cm W x 15.2 cm D) (Depth excludes connectors.)
Product weight	0.7 lbs (0.3 kg)
Regulatory compliance	CE, c-UL UL, CE**, C-tick, FCC Class A**, ICES, VCCI, Complies with the appropriate requirements of RoHS, WEEE
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(4378-090718-D13 )

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-1174-11	7,6 cm	32,5 cm	23,5 cm	1,02 kg
60-1174-12	7,6 cm	32,5 cm	23,5 cm	1,02 kg