FOXBOX Tx VGA/YUV

Technische Daten

FOXBOX Tx VGA/YUV
NOTE     The analog RGB input signal is digitized pixel for pixel in the transmitter, sent digitally through the fiber cable, and converted back to analog RGB in the receiver.
NOTE     The analog audio signal(s) is (are) digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver.
NOTE     These transceivers are class 1 laser products. They meet the safety regulations of IEC-60825.
Optical fiber interconnection between transmitter and receiver
Number/type	1 or 2 fiber optic
NOTE     Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control/communication.
Connectors	2 LC connectors
Operating distance
Singlemode	30 km (18.75 miles) with singlemode (SM) cables with SM units
Multimode	300 m (985') with 62.5 µm OM1 multimode (MM) cables with MM units 1 km (3280') with 50 µm OM2 multimode (MM) cables with MM units 2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimized multimode cable with MM units
NOTE     Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
Nominal peak wavelength	850 nm for MM, 1310 nm for SM
Data rate	4.25 Gbps
Transmission power
Singlemode	-5 dBm, typical
Multimode	-5 dBm, typical
Maximum receiver sensitivity
Singlemode	-18 dBm, typical
Multimode	-12 dBm, typical
Optical loss budget
Singlemode	13 dB, maximum
Multimode	7 dB, maximum
Video
Signal type	VGA-UXGA RGBHV, RGBS, component video
NOTE     For non-scaling receivers, color space follows the input source. HD component video from a transmitter is output from the receiver in a YUV 4:4:4 color space.
Gain	Unity
Pixel data bit depth	8 bits per channel, 3 channels (R, G, B; or YUV)
Maximum resolution	640x480 up to 1920x1200 @ 60Hz, including 480p, 576p, 720p, 1080i, 1080p @ 60Hz, sampled pixel for pixel; higher resolution 2K (2048x1080) @ 60 Hz, undersampled
Video input
Number/signal type	1 VGA-UXGA RGBHV, RGBS, component video (bi- or tri-level YUV, 480p, 576p, 720p, 1080i, 1080p)
Connectors	1 female 15-pin HD
Nominal level	1 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video
Minimum/maximum levels	Analog: 0.3 V to 0.75 Vp-p with no offset, terminated
Impedance	75 ohms
Horizontal frequency	24 kHz to 100 kHz
Vertical frequency	40 Hz to 120 Hz
Return loss	<-40 dB @ 5 MHz
Video output — See receiver specifications
Sync
Input type	RGBHV, RGBS, component video (bi- or tri-level sync)
Output type	Via FOXBOX VGA Rx: RGBHV, component video (bi- or tri-level)
Input level	2.5 V to 5.0 Vp-p
Output level	TTL: 5.0 Vp-p, unterminated, on HV, for RGBHV, RGBS 0.3 Vp-p for component video (bi-level sync, unterminated) or for Gs (SOG), terminated 0.6 Vp-p for component video (tri-level sync)
Input impedance	10k ohms
Output impedance	75 ohms
Polarity	Positive or negative (follows input or can be set by user)
Audio
Gain
Range	Adjustable, -18 dB to +10 dB
Default	Unbalanced output: 0 dB
Frequency response	20 Hz to 20 kHz, ±0.5 dB
THD + Noise	0.10% @ 1 kHz at nominal level
S/N	>80 dB at maximum output (unweighted)
CMRR	65 dB @ 20 Hz to 20 kHz
Audio bits per sample	18 bits per channel, 2 channels (L, R)
Sampling rate	48 kHz
Audio input
Number/signal type	1 unbalanced stereo or 2 unbalanced mono
Connectors	(1) 3.5 mm mini stereo jack
Impedance	18k ohms unbalanced, DC coupled
Nominal level	-10 dBV (316 mVrms)
Maximum level	+8.9 dBV, (unbalanced) at 1% THD+N
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output — see receivers' audio output specifications
Control/remote
Serial control ports on each unit (transmitter and receiver)
Control	1 RS-232, 2.5 mm mini stereo jack (front panel)
Pass-through	1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used) (rear panel)
Baud rate and protocol
Control	9600 baud, 8 data bits, 1 stop bit, no parity
Pass-through	9600 to 115,200 baud
Serial control pin configuration	Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND
Program control	Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™)
General
Power supply	External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watts
Power input requirements	12 VDC, 0.6 A
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, vents on top and side panels
Thermal dissipation	17.5 BTU/hr
Mounting
Rack mount	Yes, with optional rack shelf
Furniture mount	Yes, with optional under desk mounting kit
Enclosure type	Metal
Enclosure dimensions	1.0" H x 4.3" W x 6.0" D (quarter rack wide) (2.5 cm H x 10.9 cm W x 15.2 cm D) (Depth excludes connectors.)
Product weight	0.7 lbs (0.3 kg)
Regulatory compliance	CE, c-UL UL, CE**, C-tick, FCC Class A**, ICES, VCCI, Complies with the appropriate requirements of RoHS, WEEE
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(4368-090518-D17)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-1058-11	6,4 cm	22,2 cm	31,3 cm	1,06 kg
60-1058-12	6,4 cm	22,2 cm	31,3 cm	1,06 kg