PowerCage 401

€ 3708.00

  • inkl. 20 % USt zzgl. Versandkosten
    zurzeit nicht lagernd:
    Lieferzeit 5-7 Tage*

    *Alle Lieferzeiten sind ungefähre Angaben und können von der tatsächlichen Lieferzeit abweichen!

Hersteller
Extron
Art.Nr.
60-1492-01
EAN
60-1492-01
Gewicht
11 kg

Produktbeschreibung

Hauptmerkmale

  • Platzsparendes Design durch ein kompaktes, 1 HE hohes Gehäuse zur Rackmontage
  • Für bis zu vier Extender-Module
  • Modulares, vor Ort erweiterbares und bei laufendem Betrieb austauschbares Design
  • Überwachung und Steuerung über Ethernet
  • Zwei redundante, im Betrieb austauschbare Netzteile
  • RS?232-Einspeisung vom Ethernet-Anschluss
Modell Beschreibung der Version Teilenummer
PowerCage 401 Enclosure 1 HE hohes Gehäuse mit vier Einschüben 60-1492-01
PowerCage 401 Power Supply Kit Ersatznetzteil-Set 70-1087-01

Technische Daten

Technische Daten

PowerCage™ 401 Enclosure
Communications — Enclosure host ports
    Serial control port  1 bidirectional RS-232, 3.5 mm captive screw connector, 3 pole (rear panel)
       Baud rate and protocol  9600 baud, 8 data bits, 1 stop bit, no parity
       Pass-through baud rate  9600 to 115,200 baud
       Pass-through protocol  Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON/XOFF, none
Defaults: 8 data bits, 1 stop bit, no parity, flow control = none
       Serial control pin configuration  1 = Tx, 2 = Rx, 3 = Gnd
    USB control port  1 female mini USB (front panel)
       USB standards  USB 2.0, low speed
    Ethernet control port  1 female RJ-45
       Ethernet data rate (for network communication)  10/100/1000Base-T, half/full duplex with autodetect
       Ethernet protocol  ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, SNMP, Telnet
       Ethernet default settings  Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off
       Web server  Up to 200 simultaneous sessions
7.0 MB nonvolatile memory
       Program control  Extron control/configuration program for Windows® (PCS)
Extron Simple Instruction Set (SIS)
Microsoft® Internet Explorer® ver 6.0 or higher, Telnet
General
    Power supply  Internal, 2 (positive-negative), primary and redundant, hot-swappable
100-240 VAC, 50-60 Hz
    Power consumption  6.1 watts with no boards installed.
    Power input requirements for boards  12 VDC, 1.0 A, supplied by the PowerCage 401 enclosure
    Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling  Fans, front to back
    Thermal dissipation  20.6 BTU/hr
    Mounting 
       Rack mount  Yes
    Enclosure type  Metal
    Enclosure dimensions  1.72" H x 19.00" W x 14.00" D (1U high, full rack wide)
(4.4 cm H x 48.3 cm W x 35.6 cm D)
(Depth excludes connectors on the optional boards.)
    Product weight  8.0 lbs (3.6 kg)
    Vibration  ISTA 1A in carton (International Safe Transit Association)
    Regulatory compliance 
       Safety  CE, c-UL, UL
Additionally, for FOX boards: FDA Class 1
       EMI/EMC  CE, C-tick, FCC Class A, ICES, VCCI
       Environmental  Complies with the appropriate requirements of RoHS, WEEE.
    Product warranty  3 years parts and labor
    Everlast power supply warranty  7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(3564-111716-D3)