PowerCage 401 FOX DT HD
EUR
3504.00
€ 3504.00
Hersteller
Extron
Art.Nr.
70-1092-11
EAN
70-1092-11
Produktbeschreibung
Hauptmerkmale
- Überträgt HDMI-, Stereo-Audio- und RS?232-Steuerungssignale über sehr lange Glasfaserstrecken
- Vollständig digitale Technologie für eine pixelgenaue Übertragung von Signalen bis zu 1920x1200, einschließlich 1080p/60
- Key Minder® überprüft kontinuierlich die HDCP-Konformität für ein schnelles und zuverlässiges Umschalten
- EDID Minder® verwaltet automatisch die EDID-Kommunikation zwischen den angeschlossenen Geräten
- Im laufenden Betrieb austauschbares Modul für das PowerCage 401-Gehäuse (Teilenummer 60?1492?01)
- Audio Embedding
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
PowerCage 401 FOX DT HD MM | Dualer Sender - Multimode | 70-1092-11 | |
PowerCage 401 FOX DT HD SM | Dualer Sender - Singlemode | 70-1092-12 |
Technische Daten
Technische Daten
-
PowerCage™ 401 FOX DT HD Specification Frame rate 1 24, 25, 30, 50, or 60 fps Chroma sampling 1 4:4:4 Color bit depth 1 8 bits per color Signal type DVI 1.0, HDMI 1.4a, HDCP 1.4 Max. video data rate 4.95 Gbps per HDMI connection NOTE 1Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to determine video parameters supported by this data rate. NOTE This product requires four parallel HDMI connections to achieve 4K. NOTE The PowerCage 401 FOX DT HD boards are not compatible with the FOX 3G HD-SDI, FOX 3G DVC, or FOX AV models. NOTE The PowerCage 401 FOX DT HD board is available in singlemode or multimode version. NOTE The PowerCage 401 FOX DT HD board is a class 1 laser product. It meets the safety regulations of IEC-60825. Optical fiber interconnection between transmitter and receiver Number/type 4 singlemode or 4 multimode fiber optic input and output per FOX board Connectors 4 bidirectional LC connectors per FOX board Operating distance Singlemode 30 km (18.75 miles) with singlemode (SM) cables with a SM board Multimode 300 m (984') with 62.5 µm OM1 multimode (MM) cable and a MM board
1 km (3280') with 50 µm OM2 multimode (MM) cable and a MM board
2 km (6561') with 50 µm OM3/OM4 2000/4700 MHz bandwidth laser optimized MM cable and a MM boardNOTE Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. Nominal peak wavelength 850 nm for multimode (MM), 1310 nm for singlemode (SM) Transmission power, singlemode or multimode -5 dBm, typical Maximum receiver sensitivity Singlemode -18 dBm, typical Multimode -12 dBm, typical Optical loss budget Singlemode 13 dB, maximum Multimode 7 dB, maximum Maximum channel data rate 4.25 Gbps Video NOTE Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input and output. Maximum data rate 4.95 Gbps Maximum pixel clock 165 MHz Color space 4:4:4 Horizontal frequency 24 kHz to 135 kHz Vertical frequency 40 Hz to 120 Hz Maximum resolution 640x480 up to 1920x1200 @ 60Hz, including 480p, 576p, 720p @ 50/59.94/60Hz, 1080i @ 25/30 HZ, 1080p @ 50/60Hz, sampled pixel for pixel; higher resolution 2K (2048x1080) @ 60 Hz, undersampled Formats RGB and YCbCr digital video EDID Supports emulation of custom or factory preset Extended Display Identification Data (EDID) tables. HDCP Compliant with High-bandwidth (Digital Content Protection (HDCP) using DVI and HDMI standards). Standards DVI 1.0, HDMI 1.4a, HDCP 1.4, CEA-861E Video input Number/signal type 2 single link HDMI Connectors 2 female 19-pin HDMI type A Nominal level 0.8 Vp-p Audio NOTE On PowerCage FOX 401 boards, the analog audio signals are digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver. Gain Range Adjustable, -18 dB to +10 dB Default Unbalanced output: -6 dB; balanced output: 0 dB Frequency response 20 Hz to 20 kHz, ±0.5 dB THD + Noise 0.10% @ 1 kHz at nominal level S/N >80 dB at maximum output (unweighted) CMRR 65 dB @ 20 Hz to 20 kHz Audio bits per sample 18 bits per channel, 2 channels (L, R) Sampling rate 48 kHz Audio input Number/signal type 2 stereo, unbalanced or
4 mono, unbalanced
2 stereo, de-embedded from HDMI (2-ch, PCM only)Connectors (2) 3.5 mm mini stereo jack
2 female HDMI, type AImpedance >10k ohms unbalanced, DC coupled Nominal level -10 dBV (316 mVrms) Maximum level +8.9 dBV, unbalanced at 1% THD+N NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu Audio output — See the receiver specifications Communications — Serial pass-through port Serial pass-through port 2 bidirectional RS-232, 3.5 mm captive screw connector, 3 pole (through FOX DT HD) Baud rates 9600 to 115,200 baud Pass-through pin configuration 1 = Tx, 2 = Rx, 3 = Gnd Program control Extron control/configuration program for Windows® (PCS)
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer® ver 6.0 or higher, TelnetGeneral Power supply Supplied by PowerCage 401 enclosure. Power consumption 9.9 watts Power input requirements 12 VDC, 1.0 A, supplied by the PowerCage 401 enclosure Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Convection, within the PowerCage 401 enclosure Thermal dissipation 33.8 BTU/hr Dimensions 1.60" H x 3.50" W x 8.00" D
(4.1 cm H x 8.9 cm W x 20.3 cm D)
(Fits a single slot opening in a PowerCage 401 enclosure.)Product weight 0.8 lbs (0.4 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety CE, c-UL, FDA Class 1, UL EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI Environmental Complies with the appropriate requirements of RoHS, WEEE. Product warranty 3 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (3795-111616-D4)