PowerCage 401
EUR
1020.00
€ 1020.00
Hersteller
Extron
Art.Nr.
70-1087-01
EAN
70-1087-01
Produktbeschreibung
Hauptmerkmale
- Platzsparendes Design durch ein kompaktes, 1 HE hohes Gehäuse zur Rackmontage
- Für bis zu vier Extender-Module
- Modulares, vor Ort erweiterbares und bei laufendem Betrieb austauschbares Design
- Überwachung und Steuerung über Ethernet
- Zwei redundante, im Betrieb austauschbare Netzteile
- RS?232-Einspeisung vom Ethernet-Anschluss
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
PowerCage 401 Enclosure | 1 HE hohes Gehäuse mit vier Einschüben | 60-1492-01 | |
PowerCage 401 Power Supply Kit | Ersatznetzteil-Set | 70-1087-01 |
Technische Daten
Technische Daten
-
PowerCage™ 401 Enclosure Communications — Enclosure host ports Serial control port 1 bidirectional RS-232, 3.5 mm captive screw connector, 3 pole (rear panel) Baud rate and protocol 9600 baud, 8 data bits, 1 stop bit, no parity Pass-through baud rate 9600 to 115,200 baud Pass-through protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON/XOFF, none
Defaults: 8 data bits, 1 stop bit, no parity, flow control = noneSerial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd USB control port 1 female mini USB (front panel) USB standards USB 2.0, low speed Ethernet control port 1 female RJ-45 Ethernet data rate (for network communication) 10/100/1000Base-T, half/full duplex with autodetect Ethernet protocol ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, SNMP, Telnet Ethernet default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = offWeb server Up to 200 simultaneous sessions
7.0 MB nonvolatile memoryProgram control Extron control/configuration program for Windows® (PCS)
Extron Simple Instruction Set™ (SIS™)
Microsoft® Internet Explorer® ver 6.0 or higher, TelnetGeneral Power supply Internal, 2 (positive-negative), primary and redundant, hot-swappable
100-240 VAC, 50-60 HzPower consumption 6.1 watts with no boards installed. Power input requirements for boards 12 VDC, 1.0 A, supplied by the PowerCage 401 enclosure Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Fans, front to back Thermal dissipation 20.6 BTU/hr Mounting Rack mount Yes Enclosure type Metal Enclosure dimensions 1.72" H x 19.00" W x 14.00" D (1U high, full rack wide)
(4.4 cm H x 48.3 cm W x 35.6 cm D)
(Depth excludes connectors on the optional boards.)Product weight 8.0 lbs (3.6 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety CE, c-UL, UL
Additionally, for FOX boards: FDA Class 1EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI Environmental Complies with the appropriate requirements of RoHS, WEEE. Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (3564-111716-D3)