PowerCage FOX Tx VGA
EUR
2556.00
€ 2556.00
Hersteller
Extron
Art.Nr.
70-699-12
EAN
70-699-12
Produktbeschreibung
Hauptmerkmale
- Überträgt VGA-, Stereo-Audio- und RS-232-Steuerungssignale über sehr lange Strecken über eine einzige Glasfaser
- Vollständig digitale Technologie liefert pixelgenaue Übertragung von Signalen bis zu 1600x1200
- Modulares und bei laufendem Betrieb austauschbares Modul für das Gehäuse PowerCage 1600 Enclosure (Teilenummer
60-978-01) - Als Multimode-Modell mit 850 nm für mittelweite Übertragungen bis zu 2 km oder als Singlemode-Modell mit 1310 nm für extreme Entfernungen bis 30 km
- Alarmmeldung bei Leitungsunterbrechung
- RS-232-Steuerung
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
PowerCage FOX Tx VGA MM | Multimode - Sender | 70-699-11 | |
PowerCage FOX Tx VGA SM | Singlemode - Sender | 70-699-12 |
Technische Daten
Technische Daten
-
PowerCage™ FOX Tx VGA NOTE The PowerCage FOX Tx VGA board is not compatible with the FOX 3G HD-SDI, FOX 3G DVC, or FOX AV models. NOTE The PowerCage FOX Tx VGA board is available in singlemode or multimode version. NOTE The PowerCage FOX Tx VGA board is a class 1 laser product. It meets the safety regulations of IEC-60825. Optical fiber interconnection between transmitter and receiver Number/type 1 singlemode or 1 multimode fiber optic input and output per FOX board NOTE Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to return data for bidirectional control and communication. Connectors 2 bidirectional LC connectors per FOX board Operating distance Singlemode 30 km (18.75 miles) with singlemode (SM) cables with a SM board Multimode 300 m (985') with 62.5 µm OM1 multimode (MM) cable and a MM board
1 km (3280') with 50 µm OM2 multimode (MM) cable and a MM board
2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimized MM cable and a MM boardNOTE Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. Nominal peak wavelength 850 nm for multimode (MM), 1310 nm for singlemode (SM) Transmission power, singlemode or multimode -5 dBm, typical Maximum receiver sensitivity Singlemode -18 dBm, typical Multimode -12 dBm, typical Optical loss budget Singlemode 13 dB, maximum Multimode 7 dB, maximum Maximum channel data rate 4.25 Gbps Video NOTE On PowerCage FOX VGA boards, the analog video input signal is digitized pixel for pixel in the transmitter, sent digitally through the fiber cable, and converted back to analog video in the receiver. Signal type VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs Gain Unity Pixel data bit depth 8 bits per channel, 3 channels (R, G, B) Maximum resolution 640x480 to 1600x1200 or 480p,576p, 720p,1080i, 1080p @ 60 Hz pixel for pixel; higher resolutions up to 1920x1200 @ 60 Hz, undersampled Video input Number/signal type 1 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs Connector 1 female 15-pin HD Nominal levels 0.7 Vp-p for RGB Minimum/maximum levels Analog: 0.3 V to 0.75 Vp-p with no offset, terminated Impedance 75 ohms Horizontal frequency 24 kHz to 100 kHz Vertical frequency 40 Hz to 120 Hz Return loss >40 dB @ 5 MHz Sync Input type RGBHV, RGBS, RGsB, RsGsBs Input level 2.5 V to 5.0 Vp-p Input impedance 10k ohms Polarity Positive or negative (follows input or can be set by user) Audio NOTE On PowerCage FOX boards, the analog audio signals are digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver. Gain Range Adjustable, -18 dB to +10 dB Default Unbalanced output: -6 dB; balanced output: 0 dB Frequency response 20 Hz to 20 kHz, ±0.5 dB THD + Noise 0.10% @ 1 kHz at nominal level S/N >80 dB at maximum output (unweighted) CMRR 65 dB @ 20 Hz to 20 kHz Audio bits per sample 18 bits per channel, 2 channels (L, R) Sampling rate 48 kHz Audio input Number/signal type 1 stereo, balanced/unbalanced or
2 mono, balanced/unbalancedConnectors (1) 3.5 mm captive screw connector, 5 pole Impedance ?10k ohms unbalanced, ?20k ohms balanced Nominal level +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) Maximum level +8.9 dBV, unbalanced at 1% THD+N NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu Control/remote Serial control ports Control 1 bidirectional RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles; shared with the alarm port) Pass-through 1 RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles, "RS-232 Over Fiber") Baud rate and protocol Control 9600 baud, 8 data bits, 1 stop bit, no parity Pass-through 9600 to 115,200 baud Serial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd Captive screw connector Program control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)General Power Supplied by a PowerCage 1600 enclosure Power consumption 5.68 watts Power input requirements 12 VDC, 1.0 A, supplied by the PowerCage enclosure Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Enclosure: fans, front to back
Boards: convection, within the PowerCage enclosureThermal dissipation 27.6 BTU/hr Dimensions Each board fits a double slot opening in a PowerCage 1600 enclosure. Product weight 1.1 lbs (0.5 kg) Shipping weight 2 lbs (1 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety CE, c-UL, UL EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI Environmental Complies with the appropriate requirements of RoHS, WEEE. Product warranty 3 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (8.1-121114-D3) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 70-699-11 6,7 cm 22,9 cm 34,0 cm 0,75 kg 70-699-12 6,7 cm 22,9 cm 34,0 cm 0,75 kg