MLC 104 IP Plus DV+
EUR
1368.00
€ 1368.00
Hersteller
Extron
Art.Nr.
60-818-82
EAN
60-818-82
Gewicht
2 kg
Produktbeschreibung
Hauptmerkmale
- Überwachung und Steuerung über Ethernet
- Bidirektionaler RS-232-Anschluss zur universellen Displaysteuerung
- Drei digitale E/A-Anschlüsse
- Dedizierter IR-Anschluss
- IR-Lernen
- RS-232-Anschluss zur Unterstützung von MediaLink-Umschaltern
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
MLC 104 IP Plus DV+ | Schwarze & weiße Frontblenden | 60-818-82 |
Technische Daten
Technische Daten
-
MLC 104 IP Plus Series Control — host ports Serial host port 1 bidirectional RS-232 front panel 2.5 mm mini stereo jack Baud rate and protocol 38400 baud, 8 data bits, 1 stop bit, no parity Serial control pin configuration Mini stereo jack: tip = Tx, ring = Rx, sleeve = Gnd Ethernet host port 1 female RJ-45 Ethernet data rate 10/100Base-T, half/full duplex with autodetect Ethernet protocol ARP, ICMP (ping), IP, TCP, DHCP, HTTP, SMTP, Telnet Ethernet default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = offWeb server Up to 200 simultaneous sessions
7.25 MB nonvolatile user memorySecondary control panel (SCP) (1) 3.5 mm 5-pole direct insertion captive screw connector (shared with control module port) Program control Extron Global Configurator for Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer®, TelnetIR learning frequencies 30 kHz to 62 kHz IR learning distance 2" (5.1 cm) to 12" (30.5 cm) from the top panel Serial Display control port (1) 3.5 mm direct insertion captive screw connector, 3 pole, for bidirectional RS-232 control (±5 V) Switcher control port (1) 3.5 mm direct insertion captive screw connector, 3 pole, for bidirectional RS-232 control (±5 V) Baud rate and protocol (RS-232) 115200 to 300 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), or even or odd parity IR IR control port (1) 3.5 mm direct insertion captive screw connector, 2 pole
TTL level (0 to 5 V) infrared control up to 1 MHzDigital I/O Number/type 3 digital input/output (configurable) Connector (1) 3.5 mm direct insertion captive screw connector, 4 pole Pin configuration 1, 2, 3 = digital inputs/outputs 1, 2, and 3; GND = Gnd Digital inputs Input voltage range 0-12 VDC Input impedance 28k ohms Programmable pullup 2k ohms to +5 VDC Threshold low to high >2.8 VDC Threshold high to low <2.0 VDC Digital outputs 250 mA sink from 24 VDC, maximum General Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 0.5 A, 6 wattsPower consumption MLC 104 IP Plus DV+ Includes MLC 104 IP Plus and IRCM-DV+ Device 3.4 watts, 12 VDC Device and power supply 4.4 watts, 100-240 VAC, 50-60 Hz All other models Device 3.1 watts, 12 VDC Device and power supply 4.2 watts, 100-240 VAC, 50-60 Hz NOTE If the MLC powers accessories (control modules, SCPs), the MLC must be powered by its own external power supply, not by a switcher. If accessories are powered separately, the MLC may be powered by an MLS or PVS switcher. Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Convection, no vents Thermal dissipation MLC 104 IP Plus DV+ Device 11.3 BTU/hr Device and power supply 14.9 BTU/hr All other models Device 10.5 BTU/hr Device and power supply 14.3 BTU/hr Mounting Rack mount MLC 104 IP Plus DV+ No All other models Yes, with optional rack mounting kits Furniture or wall mount Yes, all models Enclosure type MLC 104 IP Plus, MLC 104 IP Plus DV+ High-impact plastic faceplate, metal rear enclosure MLC 104 IP Plus AAP, MLC 104 IP Plus L Metal faceplate, metal rear enclosure Enclosure dimensions MLC 104 IP Plus faceplate 4.50" H x 4.60" W x 0.10" D (115 mm H x 117 mm W x 2.6 mm D) (2 gang) MLC 104 IP Plus AAP and MLC 104 IP Plus DV+ faceplates 4.50" H x 8.23" W x 0.10" D (115 mm H x 209 mm W x 2.6 mm D) (4 gang) MLC 104 IP Plus L faceplate 3.15" H x 6.50" W x 0.10" D (80 mm H x 166 mm W x 2.6 mm D) MLC 104 IP Plus DV+ device 2.70" H x 3.38" W x 1.80" D (69 mm H x 86 mm W x 46 mm D) and
2.70" H x 2.60" W x 0.90" D (69 mm H x 66 mm W x 23 mm D)
(Depth excludes knobs and buttons. Fits some 4 gang wall boxes. Allow at least 1.9" [48 mm] depth in the wall or furniture.)All other models' device 2.70" H x 3.38" W x 1.80" D (69 mm H x 86 mm W x 46 mm D)
(Depth excludes knob and buttons. Fits some 2 gang boxes. Allow at least 1.9" [48 mm] depth in the wall or furniture.)Product weight MLC 104 IP Plus DV+ 0.5 lbs (0.2 kg) All other models 0.6 lbs (0.3 kg) Regulatory compliance CE, C-Tick, c-UL FCC Class A, ICES, KC mark, UL, VCCI
Complies with the appropriate requirements of Section 508 of the Rehabilitation Act (29 U.S.C. 794d).Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (4407-D12-100118) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-818-82 10,2 cm 35,6 cm 48,3 cm 1,81 kg