IPCP Pro 355DR
EUR
3696.00
€ 3696.00
Hersteller
Extron
Art.Nr.
60-1433-01A
EAN
60-1433-01A
Produktbeschreibung
Hauptmerkmale
- Kann sicher auf Standard-DIN-Schienen montiert werden, wie sie in Racks und Medienschränken der Automatisierungseinrichtungen von Drittanbietern verwendet werden
- Unterstützt TouchLink Pro-Touchpanels, eBUS®-Tastenfelder und Netzwerk-Tastenfelder
- Mit dem AV?LAN-Anschluss können AV?Geräte vom Unternehmensnetzwerk abgegrenzt werden
- Nutzt sichere, branchenübliche Kommunikationsprotokolle
- LinkLicense-Unterstützung®
- Zwei bidirektionale RS?232-Anschlüsse mit Software-Handshake
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
IPCP Pro 355DR | IP Link Pro-Steuerungsprozessor, DIN-Schiene | 60-1433-01 | |
IPCP Pro 355DR | IP Link Pro-Steuerungsprozessor, DIN-Schiene, LinkLicense-Upgrade für Benutzeroberflächen | 60-1433-01A |
Technische Daten
Technische Daten
-
IPCP Pro 355DR Memory SDRAM 512 MB Flash 4.5 GB Software and control options Software Extron Global Configurator® Plus and Professional for Windows®, Global Scripter® Control options GlobalViewer®, Extron Control for iPad and Web, TouchLink® Pro touchpanels, or eBUS® button panels Ethernet control Network interface controllers (NICs) 2: 1 LAN, 1 AV LAN Connectors 2 female RJ-45 connectors Data rate 10/100/1000Base-T, half/full duplex with autodetect Protocols DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP Default settings LAN Link speed and duplex level = autodetected
IP address = 192.168.253.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS: 127.0.0.1AV LAN Link speed and duplex level = autodetected
DHCP server = disabled
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0DHCP server disabled IP address = 192.168.254.250
DNS = 127.0.0.1DHCP server enabled IP address = 192.168.254.1
DNS = 192.168.254.1
Dynamic leased IP address pool = 192.168.254.100 - 192.168.254.149
Maximum lease count = 50
Lease time = 24 hoursSerial control Quantity/type 1 bidirectional RS-232, RS-422, RS-485 (port 1)
2 bidirectional RS-232 (ports 2 and 3)Connectors (1) 3.5 mm captive screw connector, 5 pole
(2) 3.5 mm captive screw connectors, 3 poleBaud rate and protocol 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, or odd parityNOTE The 5-pole ports support both hardware and software flow control.
The 3-pole ports support software flow control.
The default for both types of ports is no flow control.Pin configurations Serial, 5-pole captive screw RS-232 (default) Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 = CTS RS-422 Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 = Tx+, 5 = Rx+ RS-485 Pins 1 and 2 (tied together) = data-, 3 = Gnd, 4 and 5 (tied together) = data+ Serial, 3-pole captive screw Pin 1 = Tx, 2 = Rx, 3 = Gnd Digital I/O control Quantity/type 4 digital input/output (configurable) Connectors (1) 3.5 mm captive screw connector, 5 pole Digital inputs Input voltage range 0 to 24 VDC, clamped at +30 VDC Input impedance >10k ohms Programmable pullup 1k ohms to +5 VDC Threshold low to high >2.8 VDC Threshold high to low <2.0 VDC Digital outputs 250 mA sink from 24 VDC max. Pin configurations 1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = Gnd IR/serial control Quantity/type 2 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz Connector (1) 3.5 mm captive screw connector, 5-pole Baud rate and protocol (RS-232) 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, or odd parityPin configurations For each port, pin 1 = signal, 2 = Gnd IR output carrier frequency 30 kHz to 300 kHz IR learning carrier frequency 30 kHz to 300 kHz IR learning capture distance 2" (5.1 cm) to 12" (30.5 cm) from the front panel Relay control Quantity/type 4 normally open relays Relay control connectors (2) 3.5 mm captive screw connectors, 3 pole Relay control contact rating 24 VDC, 1 A eBUS control eBUS control ports (1) 3.5 mm captive screw connector, 4 pole eBUS pin configuration +V = +12 VDC; +S = + signal; -S = - signal; G = ground Recommended cable type Extron STP20-2/1000 or STP20-2P/1000 cable Maximum system cable length 1000 feet (305 meters) sum total for the eBUS system, regardless of topology. Power injection may be required depending on system cabling topology and primary power supply wattage. See the eBUS Technology Reference Guide for details. eBUS power output 6 watts General Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 wattsPower input requirements 12 VDC, 1 A, 12 watts, max. Power consumption Device 8.8 watts, 12 VDC Device and power supply 11.5 watts, 100-240 VAC, 50-60 Hz Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Convection, no vents Thermal dissipation Device 9.3 BTU/hr Device and power supply 18.6 BTU/hr Mounting Rack mount No DIN rail mount Yes, fits a standard 35 mm high DIN rail Enclosure type Plastic Enclosure dimensions 3.6" H x 6.3" W x 2.3" D
(90.2 mm H x 159.5 mm W x 57.5 mm D)
(Height excludes bottom of mounting clip.)Product weight 0.6 lb (0.3 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety CE, c-UL, UL EMI/EMC CE, C-Tick, FCC Class A, ICES, VCCI Environmental Complies with the appropriate requirements of RoHS, WEEE Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (3921-D4-032817) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-1433-01 7,0 cm 33,8 cm 23,2 cm 0,93 kg 60-1433-01A 7,0 cm 33,8 cm 23,2 cm