IPCP Pro PCS1
EUR
1020.00
€ 1020.00
Hersteller
Extron
Art.Nr.
60-1618-01
EAN
60-1618-01
Produktbeschreibung
Hauptmerkmale
- Unterstützt TouchLink Pro-Touchpanels, eBUS®-Tastenfelder und Netzwerk-Tastenfelder
- Nutzt sichere, branchenübliche Kommunikationsprotokolle
- LinkLicense-Unterstützung®
- Intelligente Strommessung mit Alarm
- Status der Netzspannungsausgänge bleibt nach einem Stromausfall erhalten
- Ein Stromstecker und eine Buchse - beide nutzen IEC-Verbindungen
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
IPCP Pro PCS1 | IP Link Pro-Steuerungsprozessor | 60-1618-01 | |
IPCP Pro PCS1 | IP Link Pro-Steuerungsprozessor mit LinkLicense-Upgrade für Benutzeroberflächen | 60-1618-01A |
Technische Daten
Technische Daten
-
IPCP Pro PCS1 Memory SDRAM 512 MB Flash 4.5 GB Software and control options Software Extron Global Configurator® Plus and Professional for Windows®, Global Scripter® Control options GlobalViewer Enterprise®, Extron Control, TouchLink® Pro touchpanels, or eBUS® button panels Ethernet control Network interface controllers (NICs) 1 Connector 1 female RJ-45 connector Data rate 10/100/1000Base-T, half/full duplex with autodetect Protocols DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP Default settings Link speed and duplex level = autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS: 127.0.0.1Serial control Quantity/type 1 bidirectional RS-232 Connector (1) 3.5 mm captive screw connector, 3 pole Baud rate and protocol 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, or odd parityNOTE The 3-pole port supports software flow control. The default is no flow control. Pin configurations Serial, 3-pole captive screw Pin 1 = Tx, 2 = Rx, 3 = Gnd Digital I/O control Quantity/type 3 digital input/output (configurable) Connectors (1) 3.5 mm captive screw connector, 4 pole Digital inputs Input voltage range 0 to 24 VDC, clamped at +30 VDC Input impedance >10k ohms Programmable pullup 1k ohms to +5 VDC Upper threshold >2.8 VDC Lower threshold <2.0 VDC Digital outputs 250 mA sink from 24 VDC max. Pin configurations 1, 2, 3 = digital I/Os 1, 2, 3; 4 = Gnd IR/serial control Quantity/type 1 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz Connector (1) 3.5 mm captive screw connector, 2-pole Baud rate and protocol (RS-232) 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, or odd parityPin configurations For each port, pin 1 = signal, 2 = Gnd IR output carrier frequency 30 kHz to 300 kHz eBUS control eBUS control ports (1) 3.5 mm captive screw connector, 4 pole eBUS pin configuration +V = +12 VDC; +S = + signal; -S = - signal; G = ground Recommended cable type Extron STP20-2/1000 or STP20-2P/1000 cable Maximum system cable length 1000 feet (305 meters) sum total for the eBUS system, regardless of topology. Power injection may be required depending on system cabling topology and primary power supply wattage. See the eBUS Technology Reference Guide for details. eBUS power output 6 watts Switched AC power output Connectors Input 1 male IEC power connector, 6" (152 mm) Output 1 female IEC power connector, 6" (152 mm) NOTE 1 male IEC to female Edison adapter is included. Voltage 100-240 VAC, 50-60 Hz Maximum AC load 10 A, TBD watts at 120 VAC
10 A, TBD watts at 220 VACCurrent sense Range 0 A to 10 A Resolution 100 mA Tolerance TBD General Power supply Internal
Input: 100-240 VAC, 50-60 HzPower consumption TBD Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Convection, no vents Thermal dissipation TBD Mounting Rack mount Yes, with optional 1U rack shelf Furniture mount Yes, with optional bracket kit Enclosure type Metal Enclosure dimensions 1.7" H x 4.3" W x 8.0" D (1U high, quarter rack wide)
(43 mm H x 109 mm W x 203 mm D)
(Depth excludes connectors.)Product weight TBD Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety CE, c-UL, UL EMI/EMC CE, C-Tick, FCC Class A, ICES, VCCI Environmental Complies with the appropriate requirements of RoHS, WEEE Product warranty 3 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (4196-D1-012518)