Medientechnik
Nach oben
Benötigen Sie
Hilfe?
0 Artikel Warenkorb
IPCP 505

Extron

IPCP 505

IPCP 505

€ 2676.00

  • inkl. 20 % USt zzgl. Versandkosten
    zurzeit nicht lagernd:
    Lieferzeit 5-7 Tage*

    *Alle Lieferzeiten sind ungefähre Angaben und können von der tatsächlichen Lieferzeit abweichen!

↖ Weitere Geräteinformationen
Hersteller
Extron
Art.Nr.
60-1071-02
EAN
60-1071-02
Gewicht
3 kg

Produktbeschreibung

Hauptmerkmale

  • Überwachung und Steuerung über Ethernet
  • Unterstützt TouchLink®-Touchpanels
  • Acht bidirektionale serielle RS-232-Anschlüsse zur universellen Steuerung von Anzeigegeräten, Umschaltern oder anderen AV-Geräten
  • Acht unidirektionale serielle/ IR-Anschlüsse
  • Acht Relais zur Raumsteuerung
  • Vier Flex-E/A-Anschlüsse als Schnittstellen für andere Systeme im Raum
Modell Beschreibung der Version Teilenummer
IPCP 505 IP Link-Steuerungsprozessor 60-1071-02

Technische Daten

Technische Daten

IPCP 505
Ethernet control interface
    Connectors  1 RJ-45 female connector
    Data rate  10/100Base-T, half/full duplex with autodetect
    Protocols  ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet
    Default settings  Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off
    Web server  Up to 200 simultaneous sessions
975 MB nonvolatile user memory
    Program control  Extron Global Configurator for Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer®, Telnet
    Global Viewer requirements  Microsoft® Internet Explorer® ver. 6 or higher
Serial control interface
    Quantity/type  2 bidirectional RS-232, RS-422, RS-485
6 bidirectional RS-232
    Connectors  (2) 3.5 mm captive screw connectors, 5 pole
(6) 3.5 mm captive screw connectors, 3 pole
    Baud rate and protocol  300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), or even or odd parity
    NOTE     The 5-pole ports support both hardware and software flow control.
The 3-pole ports support software flow control.
    Pin configurations 
      Serial, 5-pole captive screw
          RS-232 (default)  Pin 1 = Tx, 2 = Rx, 3 = GND, 4 = RTS, 5 = CTS
          RS-422  Pin 1 = Tx-, 2 = Rx-, 3 = GND, 4 = Tx+, 5 = Rx+
          RS-485  Pins 1 and 2 (tied together) = data-, 3 = GND, 4 and 5 (tied together) = data+
       Serial, 3-pole captive screw  Pin 1 = Tx, 2 = Rx, 3 = GND
Flex I/O control interface
    Quantity/type  4 analog input or digital input/output (configurable)
    Connectors  (1) 3.5 mm captive screw connector, 5 pole
    Digital inputs 
       Input voltage range  0 to 24 VDC, clamped at +30 VDC
       Input impedance  28k ohms
       Programmable pullup  2k ohms to +5 VDC
       Threshold low to high  Programmable range: 100 mV to 24 VDC, default = 2 VDC
       Threshold high to low  Programmable range: 100 mV to 24 VDC, default = 1 VDC
    Digital outputs  250 mA sink from 24 VDC max.
    Analog inputs  12 bit A/D, 0 to 24 VDC
    Pin configurations  1, 2, 3, 4 = flex I/Os 1, 2, 3, 4; 5 = GND
Control — IR/serial ports
    Quantity/type  8 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 1 MHz
    Connectors  (4) 3.5 mm captive screw connectors, 4-pole
    Baud rate and protocol (RS-232)  300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), or even or odd parity
    Pin configurations  For each port, pin 1 = signal, 2 = GND
    IR output carrier frequency  30 kHz to 1 MHz
    IR learning carrier frequency  30 kHz to 1 MHz
    IR learning capture distance  2" (5.1 cm) to 12" (30.5 cm) from the front panel
Relay control interface
    Quantity/type  8 normally open relays
    Relay control connectors  (4) 3.5 mm captive screw connectors, 4 pole
    Relay control contact rating  24 VDC, 1 A
Switched DC power output
    Quantity/type  4 switched 12 VDC outputs
    Connectors  (4) 3.5 mm captive screw connectors, 2 pole
    Power  Maximum 40 watts total
    Power sense 
       Range  0.1 watt to 40 watts
General
    Power supply  Internal
Input: 100-240 VAC, 50-60 Hz
    Power consumption  63.3 watts
    Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling  Convection, no vents
    Thermal dissipation  33.2 BTU/hr
    Mounting 
       Rack mount  Yes, with optional 1U rack shelf
    Enclosure type  Metal
    Enclosure dimensions  1.7" H x 8.7" W x 10.5" D (1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 26.7 cm D)
(Depth excludes connectors.)
    Product weight  2.5 lbs (1.1 kg)
    Shipping weight  5 lbs (3 kg)
    Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
       Safety  CE, c-UL, UL
Meets UL 60950 for safety.
       EMI/EMC  CE, C-tick, FCC Class A, ICES, KC mark, VCCI
       Environmental  Complies with the appropriate requirements of RoHS, WEEE
    Product warranty  3 years parts and labor
    Everlast power supply warranty  7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(8.0-011513-D8)
Versand-Abmessung und -Gewicht
    Teilenummer Höhe Breite Tiefe Gewicht
    60-1071-02 15,2 cm 33,0 cm 43,2 cm 1,93 kg
0 Artikel Warenkorb